Question about 2004 GMC Yukon
Posted by Anonymous on
Allot of possibilities. Can range from Idle air control motor to other things.
If you engine light it on I suggest scanning for codes and following the trouble shooting diagnistic tree for those codes.
Posted on Apr 14, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The Denali's are really susceptible to front dif. wear and failure. Because it is AWD, the front dif is always working unlike a 4WD. GM, in order to lighten up the front end built the front dif in aluminum. If it was the same as the rear, it would be bullet proof, but much heavier. After about 80,000 miles it is common to have bearings failing. Remove the drain plug which happens to be magnetic. You may see more than just the normal fine filings. You will likely see larger chunks of metal some of which is not even magnetic but will drain out with the oil. You are likely looking at a $1500 rebuild. It will get much louder and run for a long time before it really goes south.
Posted on Jun 21, 2009
See GM TSB 05-08-143-001, If you have Adjustable pedals, especially if they don't work with the memeory buttons, but function with thier own buttons. Its the Brake Pedal Position Sensor is shorted and mesing up the seat module which controls the heaters too. My 05 Suburban had the same issue
Posted on Dec 11, 2009
Tips for a great answer:
Nov 26, 2010 | 2004 GMC Yukon
Mar 20, 2010 | 1999 GMC Yukon
Feb 02, 2010 | 2004 GMC Yukon
Jan 24, 2010 | 2004 GMC Yukon
Jul 06, 2009 | 2004 GMC Yukon
Sep 30, 2008 | 2004 GMC Yukon
Mar 27, 2017 | 2004 GMC Yukon
74 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: