Question about Cars & Trucks

2 Answers

My garage is 21 feet long by 21 feet wide and 14 feet high. how do i convert that into sq feet?

I am trying to by a cooling system so I need to figure out which one will work best in that space

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 1,631 Answers

L x W = Square Footage of floor space.
21 x 21 = 441 Sq. Ft.
If you need cubic feet. Then multiply Sq. Ft. X height.
441 x 14 = 6,174 cubic feet

Posted on Apr 13, 2015

  • Ebonie Mcwhite
    Ebonie Mcwhite Apr 13, 2015

    Thank you Mike that helped alot.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Cars & Trucks Master
  • 1,585 Answers

The pep ure buying system of will do it all 4 u

Posted on Apr 13, 2015

  • Ebonie Mcwhite
    Ebonie Mcwhite Apr 13, 2015

    I'm only buying an air conditioner so there is no one to do it for me but thanks anyway

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1904 sq feet how do I convert this to linear feet for roofing


I have done tons of roofing and we always use square feet .length X width= sq ft .like 50 ft long by16 =800 then double to get both sides of roof is 1600 sq ft

Feb 12, 2015 | Cars & Trucks

1 Answer

How many feet is 350 linear feet?


Linear feet are a measure of length (no different from feet); square feet measure area. You cannot simply convert between measures of different kinds of quantities;the connection between them will be specific to a particular problem.A practical example in which this question can arise is in buying countertops for a kitchen. Some materials are sold by the square foot; others (basically those that are extruded, so they come in standard widths) are sold by the linear foot. In order to compare the two, you need to compute the area and wall length for the countertop you want.You can't convert between the two. All you have to do is to make the appropriate measurements so you can calculate the price of each item.The terms used in the lumber industry are a bit confusing.There are two terms that I think you might be mixing up.A LINEAR FOOT is simply the length of a board. If you want to know the area or volume of the board,you need additional information. For instance, 6 linear feet of 1-by-12 has an area of 6 square feet (12 inches = 1 foot, times 6 feet), and it's 1 inch thick, so the volume is 1/2 cubic foot (6 square feet times 1/12 foot). But 6 linear feet of a 1-by-6 board would have half the area and half the volume.A BOARD FOOT is equivalent to one square foot of a 1-inch-thick board. In other words, it is a square-foot-inch (ft^2-in), or 1/12 cubic foot.Linear feet are used for the pricing of a single size such as two-by-fours. Board feet are used for larger lumber that you are more likely to want to compare directly with different size boards .To sum up, neither a linear foot nor a board foot can be converted directly to square feet. A linear foot is a linear (length) measure, and a board foot is a volume measure. You need to know your particular board to do anything more, such as find the area.an example with an" L" shaped countertop will betwo rectangles are 24 by 80 inches and 24 by 36 inches. Thus the area is: 24 * 80 + 24 * 36 = 24 * (80 + 36) = 24 * 116= 2784 sq. in.To get it in square feet, divide by 144:
2784 / 144 = 19.33 sq. ft.The linear measure of this countertop would be 60 + 80 = 140 inches = 140/12 feet = 11.67 feet

Apr 08, 2014 | Cars & Trucks

1 Answer

2.8 crd injection pump


alldata.com, log in and read that yet?
did you look at this near FSM?
the 21 steps, read them yet?. did you make it to step 21,?
quote
  1. Disconnect negative battery cable.
  2. Remove engine cover and bracket.
  3. Evacuate A/C system.
  4. Remove accessory drive belt.
  5. Remove cooling fan and fan shroud.
  6. Remove charge air cooler outlet hose to intake manifold.
  7. Remove fan support assembly.
  8. Remove timing belt outer cover.
  9. Using special tool VM.1055, remove high pressure injection pump sprocket retaining nut.
  10. Install feet from VM.1067 in injection pump sprocket as shown.
  11. Install inner flange of special tool VM.1067 on injection pump sprocket as shown. Secure flange to feet in injection pump sprocket with Allen bolts supplied with tool.
  12. Screw the high pressure injection pump sprocket holding plate assembly into flange of VM.1067. Using left hand threaded bolt supplied, secure holding pl
  13. Before servicing the vehicle, refer to the Precautions section. CAUTION High pressure lines deliver diesel fuel under extreme pressure from the injection pump to the fuel injectors. This may be as high as 23,200 psi.(1600 bar). Use extreme caution when inspecting for high pressure fuel leaks. Fuel under this amount of pressure can penetrate skin causing personal injury or death. Inspect for high pressure fuel leaks with a sheet of cardboard. Wear safety goggles and adequate protective clothing when servicing fuel system.
  14. ate assembly to timing belt inner cover.
  15. Disconnect A/C lines at compressor.
  16. Remove charge air inlet hose.
  17. Remove the EGR airflow control valve from the intake manifold.
  18. Remove high pressure injection pump to fuel rail high pressure line.
  19. Disconnect high pressure injection pump quantity control valve electrical connector.
  20. Disconnect fuel supply and return lines at high pressure injection pump.
  21. Remove alternator to intake manifold bracket.
21 Remove high pressure injection pump retaining nuts and remove pump.

Care must be taken not to bend the brake vacuum tube when removing high pressure pump.
unquote:


if you learn a short cut to that, please do post it.

Jan 20, 2014 | 2004 Jeep Liberty

1 Answer

Cha cha answers


6x12 board is 6 square feet 6x14 is 7 square feet.
simply divide 500 sq ft by the size of board. ( also allow about 30% more for cutting and overlaps)

May 17, 2013 | Cars & Trucks

1 Answer

Check engine code 55 jeep grand cherokee laredo v6 1997. transmission wont shift properly also pulling code 21 and i figured out that one is for the throtle position sensor


These are the fault codes for your Jeep below;

Jeep
11 IGN reference signal.
13 Fault in the map sensor pneumatic circuit.
14 Fault in the map sensor electrical circuit.
15 Fault in the vehicle speed sensor circuit.
17 Engine running too cool.
21 Problem in the oxygen feedback circuit.
22 Fault in the coolant temperature sensor circuit.
23 Air temperature sensor.
24 Fault in the throttle position sensor circuit.
25 Fault in the IAC motor drive circuit.
27 Fault in injector driver interface circuit.
31 Purge solenoid circuit.
33 Fault in air conditioning cutout relay circuit.
34 S/C solenoid circuits.
35 Fault in fan relay circuit.
41 Fault in the charging system or no field current.
42 Fault in the ASD relay driver circuit.
43 Fault in ignition coil control circuit.
44 Battery Temp Voltage.
46 Battery voltage is too high.
47 Battery voltage is too low.
51 Lean condition is indicated.
52 Rich condition is indicated.
53 Internal problem in module.
54 Fault in the distributor high data rate pickup circuit.
55 Completion of fault code display.
62 Unsuccessful attempt to update EMR mileage.
63 Unsuccessful attempt to write to an EEPROM location by the controller.
76 Fuel pump resistor by-pass relay circuit

Mar 08, 2011 | 1997 Jeep Grand Cherokee

1 Answer

I have a code 21 that tells me cooling temperture system


A code 21 is a TPS circuit(signal voltage high). Check for sticking or misadjusted TPS. Check all wiring and connections an the TPS and the ECM. If all is good replace the TPS. I dont know how you found that the code is for the cooling system but it is not right.

Dec 26, 2010 | 1994 Hyundai Excel

2 Answers

I have a 1993 VW Passat VR6, My problem is when I try to start it, I have no spark from the spark plugs..What could be the problem or how do I fix this?????


GO TO THIS SiTE TO CHECK THE FUSE BOX!
http://vwtech.no-ip.info/images/golf/post90.gif

This are the FUSE and RELAY number SLOT!
Fuse No. Description Ampere Rating 1 Headlight, low beam, left 10 2 Headlight, low beam, right 10 3 Instrument panel lights, license plate lights 10 4 Glove compartment light 15 5 Wiper/washer 15 6 Fresh air blower 16-valve only: Air conditioning 20 7 Taillights, side marker light, right 10 8 Taillights, side marker light, left 0 9 Rear window defogger 20 10 2.0 16-valve only: Fog lights 15 11 Headlight, high beam, left,High beam indicator light 10 12 Headlight, high beam, right 10 13 Horn 16-valve only: Radiator cooling fan 10 14 Back-up lights, washer nozzle heaters 10 15 2.0 16-valve only: Engine electronics, stabilizer valve, cold start valve 10 16 Instrument panel warning lights, 16-valve only: Multi function indicator 15 17 Emergency flasher switch, turn signals 10 18 Fuel pump, oxygen sensor heater 20 19 Radiator cooling fan, air conditioning 30 20 Brake lights, cruise control 10 21 Interior lights, digital clock 16-valve only: Luggage compartment light,multi function indicator, central locking 15 22 Radio, cigarette lighter 10
Relays Relay No. Description 1 Air conditioning 2 Open 3 Digifant control unit 4 Load reduction relay 5 Low coolant level control unit or Open 6 Emergency flashers 7 Rear Wiper 8 Intermittent wipers 9 Seat belt warning system control unit (possibly headlight warning too?) 10 Fog lights 11 Horn 12 Fuel pump (except diesel)Glow plugs (diesel) 13 Radiator cooling fan after run (except 16-valve)2.0 16-valve: Starter interlock relay 14 Automatic trans., coolant temperature indicator,starter interlock relay (except 2.0 16-valve)2.0 16-valve: Radiator cooling fan after run 15 ABS pump relay 16 ABS relay 17 Heated seat control unit, driver 18 Heated seat control unit, passenger, or power seat circuit breaker 19 Automatic transmission 20 Open 21 Power window relay, ABS hydraulic pump fuse 22 ABS valves fuse 23 Air conditioning, power seat fuse 24 Power window fuse

Nov 17, 2010 | 1993 Volkswagen Passat

1 Answer

Directions on installing a catalytic converter


For optimum performance, the converter must be installed so exhaust flows through it in the proper direction. When laying beneath the vehicle with your feet towards the rear, the converter should be installed so the numbers stamped into it are readable.
s Random Technology Super Flow catalytic converters are designed to fit a variety of vehicles. Special adapters may be required or special air tube adapters may be required.
s If a converter with air tubes is installed on a vehicle not equipped with an air management system, both air tube fittings must be plugged.
s If a converter is installed on a vehicle with an air management system, one air tube elbow & one plug must be used.

Plug Installation
Determine which air tube fittings (if either) are to be used to make air connection in your application. (Plug the side away from the vehicle's air supply management system.) Plug the fitting(s) not used before installing converter.
plug%20inst%20ill.jpeg 1. As in Figure 1, place converter on a secure surface with air tube fittings up, being careful not to crush the converter body or heat shield.
2. Place plug(s) into airtube fitting(s). See Figure 2 for direction of plug.
3. With a hammer tap plug(s) into airtube fitting (s) until seated. The top of the plug(s) will be flush with the end(s) of the tube. See
Figure 3.
4. Crimp the end of the tube over the plug with pliers. Crimp in at least 4 places. See Figure 4.


Airtube Elbow Installation
The airtube elbow is installed on the same side of the converter as the
vehicle's air supply management system. The remaining tube should be plugged (See above). If your vehicle is not equipped with an air management system, both tubes should have been plugged.

After installing catalytic converter on the vehicle:

1. As shown in Figure 1, insert the airtube elbow into the converter's airtube fitting.
2. Position elbow in correct direction to connect air management system and secure either by welding or by using a small clamp.
3. Complete connection to the vehicle's air management system. (An airtube attachment kit may be required.)
random%20elbow%20ill.jpeg

For optimum performance, the converter must be installed so exhaust flows through it in the proper direction. When laying beneath the vehicle with your feet towards the rear, the converter should be installed so the numbers stamped into it are readable.
s Random Technology Super Flow catalytic converters are designed to fit a variety of vehicles. Special adapters may be required or special air tube adapters may be required.
s If a converter with air tubes is installed on a vehicle not equipped with an air management system, both air tube fittings must be plugged.
s If a converter is installed on a vehicle with an air management system, one air tube elbow & one plug must be used.

Plug Installation
Determine which air tube fittings (if either) are to be used to make air connection in your application. (Plug the side away from the vehicle's air supply management system.) Plug the fitting(s) not used before installing converter.
plug%20inst%20ill.jpeg 1. As in Figure 1, place converter on a secure surface with air tube fittings up, being careful not to crush the converter body or heat shield.
2. Place plug(s) into airtube fitting(s). See Figure 2 for direction of plug.
3. With a hammer tap plug(s) into airtube fitting (s) until seated. The top of the plug(s) will be flush with the end(s) of the tube. See
Figure 3.
4. Crimp the end of the tube over the plug with pliers. Crimp in at least 4 places. See Figure 4.


Airtube Elbow Installation
The airtube elbow is installed on the same side of the converter as the
vehicle's air supply management system. The remaining tube should be plugged (See above). If your vehicle is not equipped with an air management system, both tubes should have been plugged.

After installing catalytic converter on the vehicle:

1. As shown in Figure 1, insert the airtube elbow into the converter's airtube fitting.
2. Position elbow in correct direction to connect air management system and secure either by welding or by using a small clamp.
3. Complete connection to the vehicle's air management system. (An airtube attachment kit may be required.)
random%20elbow%20ill.jpeg

Oct 14, 2010 | Mitsubishi Montero Sport Cars & Trucks

1 Answer

Wide variance in beam lights between left n right frontheadlights


You can adjust them with either a philips screwdriver or hex head. I recommend parking on flat surface about 15 feet away from garage door or wall and set them. Or go to shop and have them use an alignment machine to do it.

Nov 12, 2009 | 2003 Kia Rio

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...