Question about Lexus RX 300
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If it is running perfectly I wouldn't think that you would need to replace the timing belt. You shouldn't need to replace that until 100,000-120,000 miles. I would definitely hold off until now unless you have start having some timing problems. Let me know if you have any other questions. Thanks for rating my response and for using FixYa!
Posted on Jul 08, 2009
Remove 3 - 4 screws on fender cover close to side marker light. Pull fender cover out a bit for you to use your other hand to reach side marker light. By twisting on one direction and here you go the light out. Replace new bulb and replace everything on reverse order.
Posted on Aug 18, 2009
/* Style Definitions */
mso-padding-alt:0in 5.4pt 0in 5.4pt;
font-family:"Times New Roman";
mso-fareast-font-family:"Times New Roman";
Lift the hatch. The tall center light is located behind the
upper hatch inside panel. There are two
panels need to remove. One panel is on the right, the other on the left. To
remove the panels you have to use flat screw driver to pry out the panel in
several locations. (These panels are secured by several small metal clips.) Be
careful to collect all these clips and replace them on the back of the panel.
You will need these clips to replace the panel later on. After remove the panels,
you will be able to locate the screws on the tall center stop light assembly. Remove
those screws and cover. After replacing light bulb. Assemble everything in
reverse order. Remember, the metal clips have to set on the back of the two
panels not the car body.
Posted on Aug 18, 2009
VSC means Vehicle Stability Control.
It comes on when the sensor send a signal that the vehicle is not stable on the ground.....check the wheel balancing and alignment and the air pressure of your tires too.
Rate this solution.
Posted on Aug 23, 2009
Nothing to change, add fluid to the reservoir in front. Lack of rear fluid could indicate a bad pump or hose connection feeding to the rear area or clogged sprayer tip
Posted on Jan 07, 2010
Tips for a great answer:
Aug 30, 2017 | Lexus Cars & Trucks
Aug 09, 2017 | Lexus Cars & Trucks
Jul 17, 2015 | 2003 Lexus RX 300
May 02, 2014 | Cars & Trucks
Mar 07, 2012 | 1999 Lexus RX 300
Oct 14, 2017 | 1999 Lexus RX 300
Aug 21, 2010 | 2001 Lexus RX 300
Sep 12, 2009 | 2000 Lexus RX 300
Feb 22, 2009 | 2001 Lexus RX 300
63 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: