Question about Jeep Liberty

2 Answers

Lights comme on but wont start ignition or starter

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 47 Answers

Ignition switch problem possibly? I had that issue I could turn the key but no crank, nothing. Lights would work fine. A piece was broken in the ignition switch (it's where you put the key).

Posted on Apr 28, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

What lights? name them>?
what year caar.
the word is CRANK does the engine crank fast?
no cranks. (if it cant crank it cant start, unless like my M/T pushed or gravity started)
1: check fuses first.
2: jumper cable crank it. that work>?
if not say so.
yes, then your battery was dead for 3 reasons. ask.
no, then the starter need to be hot wired and tested. for bad key line.
will it crank in A/T neutral , not using PARK
as the operators guide shows?

Posted on Apr 21, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine wont turn over and no lights with key in accesory position


What about with the key in the on position -do the warning lights and gauges turn on? That would mean the ignition switch has power and can turn on.
Any theft alarm activated, immobilizing the car?
Won't turn over- you mean won't start or the starter won't spin the engine over? If it won't start, ignition spark or fuel problem. If the engine won't crank, problem is in the start circuit- from battery to starter, and from battery to ignition switch to starter. Park/neutral safety switch is in circuit between key switch and starter.

Jan 03, 2014 | Cars & Trucks

1 Answer

Truck wont start


replace battery cables could have bad ground cable.if see dash lights on when turn ignition to on position.check starter fuse or relay or remove starter check for faulty starter solenoid or starter.if starter okay and fuse starter relay okay ignition fuse and switch okay see dash lights could have problem in the theft security system need have vechicle code scan see if theft security fault code show up.

Jan 28, 2013 | 1998 Chevrolet Chevrolet silverado

1 Answer

1998 chevy asto van wont crank or turn over


Turn the headlights on and watch them while the key is turned to start. If the lights go out, one of your cables or connections at battery or starter is not good. If lights dim a lot but stay on, possibly a bad starter, it needs testing. If lights aren't affected by cranking position, turn lights off, pull the small wire off the starter solenoid, hook up a test light to ground and to the solenoid wire. Light should come on when key is held in crank. If it does, likely a bad starter solenoid. If no light, then the start circuit from ignition switch to starter solenoid is not working. Check for power out of ignition switch on the start wire with key in crank, to begin with. If powered, switch is good, need to check if neutral safety switch is good, and then check or swap in a new starter relay.
Post back with any results.
Good luck.

Jan 17, 2013 | Nissan Altima Cars & Trucks

1 Answer

Wont start, clicking and all dash lights on. relpaced starter no go.


check the starter and ignition fuse. starter fuse is located in the fuse box in your engine bay, ignition fuse is located in the kick panel which is right under your steering wheel.

May 17, 2012 | 2006 Dodge Durango

2 Answers

Pt wont start or turn over


try to get a jump from a friend and see what happens, does the same, faulty starter, may need replacing, try to use small hammer and tap lightly on the starter couple time and have a friend start the car while you tap lightly on it. check ignition switch where you stick the key in. stick the key in the ignition and turn the key back and forth jiggle and wiggle it and see if your igniting will make contact. do it several time to test and see if its the ignition problems, this part is not cheap to replace.

Sep 25, 2009 | 2004 Chrysler PT Cruiser

2 Answers

02 chevy trailblazer 4.2l car wont start installed new starter still wont crank or start test fuses all are good lights and horn operate but no start could it be the ignition switch not giving power to the...


You need to establish that you have 12v in the battery and that all connections are clean and secure. Lights horn etc do not give you voltage verification...your starter uses more amperage than anything else in the car. Once you are certain that everything is OK, check for 12v at the small wire on the starter with the key turned to start. If no volts, check the neutral safety switch or clutch switch Then check ignition switch for power in/out.

Jun 09, 2009 | 2002 Chevrolet TrailBlazer

1 Answer

Will start by jumping starter but wont start by turning ignition


Try starting it in neutral, if it won't start there put a test light on the inside small post on starter and have someone turn the ignition on to start if it don't light the test light( bright) than the switch is bad or there is a break in the wire or maybe a fuseable link is burnt.

May 27, 2009 | 1988 Chevrolet K1500

2 Answers

Truck wont start, new battery, good fuses, bench tested starter they say its good, cables look ok.Turn ignition and dash lights come on can hear fan motor running.


test starter solinoid wire from harness, with a helper put test light on wire get friend to turn key to start, light should light up, wires at the bottom of engine may (look) fine

Apr 25, 2009 | 1989 Chevrolet C1500

1 Answer

Where is starter relay on 2000 olds intrige


battery good starter good but the car wont ignite the starter with the ignition key

Mar 28, 2009 | 2000 Oldsmobile Intrigue

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...