Question about 2006 Buick Rainier CXL

1 Answer

Driver bottom seat heater doesn't work - 2006 Buick Rainier CXL

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Buick Master
  • 3,218 Answers

In a lot of cases the heater grid is defective. However, you will have to check for power and ground under the seat at the grid connector to verify

Posted on Apr 12, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Seat heater comes on by itself in 2004 yukon denali


Heated Seat Components
The heated seat system consists of the following components:
• Driver and passenger heated seat switches
• Driver and passenger seat back heater elements
• Driver and passenger seat cushion heater elements
• Driver and passenger seat back temperature sensors
• Driver seat module
• Driver door module
• Passenger door module
When there are modules involved in the operation of any componet that's acting up , the module's electronic's could be the culprit ! But without testing who's to say what the problem could be !
I would have it check for DTC'S
DTC B2425 or B2430
The driver and passenger seat heaters are controlled by the driver seat module. Power is supplied to the driver seat cushion and back heater elements through individual voltage supply circuits. Power is supplied to the passenger seat cushion and back heater elements through a common voltage supply circuit. All of the driver and passenger seat heater elements are grounded by the driver seat module through individual low side drive control circuits. The heater element control circuits are pulse width modulated to ground by the driver seat module in order to control the seat temperatures by regulating the current flow through the heater elements.
DTC B2435 or B2440
The driver seat module relies on inputs from thermistors installed in the driver and passenger seat backs to control heated seat temperatures. The thermistors are 2-wire sensors supplied with a 5-volt referenced signal circuit and low reference circuit from the driver seat module. Resistance through the thermistors varies with temperature causing the heated seat sensor signal circuit voltage levels to decrease as the seat back temperatures rise.
Install a scan tool.
Start the engine.
Turn the heated seat ON.
With a scan tool, observe the Heated Seat Sensor parameter in the data list for the driver seat module.
Does the scan tool indicate that the heated seat sensor parameter is within the specified range?
0.078-4.94 V

Dec 08, 2016 | GMC Yukon Denali Cars & Trucks

1 Answer

Acadia driver seat electric adjust not working and driver and passenger heater not working


reconnect and the connect back the cabel joint under ther the driver seat

Nov 24, 2013 | GMC Cars & Trucks

1 Answer

DRIVER POWER SEAT LUMBAR BUTTON STUCK. SEAT DOESN'T MOVE


Remove the button & resolve that part of the issue,
so it either works or if tests bad-- replace it

Dec 07, 2012 | 2010 Chevrolet Silverado 1500

1 Answer

2004 GMC Envoy driver's side heated seat quit


I have the same problem except the back of mine works but the bottom doesn't. Passenger side is fine. Let me know what you find out if you could.

Aug 26, 2011 | 2004 GMC Envoy

1 Answer

MY DRIVER'S SEAT ONLY HEATS THE BACK PORTION AND PASSENGER SEAT ONLY HEATS THE BOTTOM... ANY SUGGESTIONS... FUSE OR REPLACE HEATERS...


-The passanger seat only heat the bottom of the seat. It does not have a heat pad in the back portion.

-For the driver seat, it sound like the bottom heat pad had burn out and need to be replace. The back portion and bottom share the same fuse. It takes time and the right tool to replace this heat pad, trust me I know.

Jan 20, 2011 | 2004 Honda Accord

1 Answer

I have a 2005 GMC Yukon XL and my heater only blows out cool air it will not blow hot air. Also the heated seat on the driver side does not work.


Your heater problem is more than likely a bad temp door motor.The seat heater problem is probably one of your elements.Either back or bottom.If your switch light is coming on then the element is bad.

Nov 18, 2009 | 2005 GMC Yukon

1 Answer

Heat climate control doesn/t blow warm air when on lower setting


It sounds like the blower resistor is shot. Just change out the resistor and that should take care of it.

Mar 15, 2009 | 2002 Jeep Liberty

1 Answer

Driver side seat heaters


This is a common problem, if the lights come on the switch ( which confirms your relay is working) then it is the heater in the seat itself. Dealer only part.
Hope this helps

Jan 12, 2009 | 2005 Ford Freestar

2 Answers

Bottom seat heater not working/back does


you can check under seat for broken or unplugged wires

Dec 11, 2008 | 2004 GMC Envoy

Not finding what you are looking for?
2006 Buick Rainier CXL Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...