Question about 2006 Pontiac Vibe
I don't know how to or where to separate to remove. i got 3 screws off and the wires go down into the door. do i have to take the door off? and how?
In most cases you do especially if it is a power mirror. If it is manual, you may only have to remove the plastic triangle panel to access the 3 bolts securing it
Posted on Apr 12, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there should be a plastic cover on the inside of the car where the mirror is take this off and there will be a connector block unplug this and there should be screws undo them and the whole thing should come off themn and you should be able to seperate them then.
Posted on Jul 30, 2008
As the owner of a 2001 Grand Prix GTP I can tell you that the mirror you speak of is not terribly difficult to replace, but you need the tools to remove the inside panels in the front corner of the window to get to it. Once you get that off there should be three bolts/nuts that hold the mirror on and if you have power mirrors then of course you'll have an electrical connector in there as well.
I dont have any instructions wrote up but there is a Grand Prix car club forum you can check that may have some information on how to replace it in more detail. You can go to grandprixforums.net, sign up and post up your problem and Im sure someone there will probably have specific instructions.
Posted on Dec 31, 2008
SOURCE: The battery in my 2006
The 2006 Vibe no longer has that feature. It was discontinued after 2005. I have the 2005 so I know how to change it. If your 2006 is able to change then here are the directions from my 2005.
If you have an automatic transaxle, your vehicle is equipped with an auto door lock/unlock feature which enables you to program your power door locks.
Your vehicle left the factory programmed to Mode 4.
The following is a list of the available programming options:
Mode 1: All doors and liftgate lock when the shift lever is moved out of PARK (P) with the ignition on and all doors and liftgate closed. There is no automatic door unlocking.
Mode 2: No automatic door locking or unlocking.
Mode 3: All doors and liftgate lock when the shift lever is moved out of PARK (P) with the ignition on and all doors and liftgate closed. All doors and liftgate unlock when the shift lever is moved to PARK (P) with the ignition on.
Mode 4: All doors and liftgate lock when the shift lever is moved out of PARK (P) with the ignition on and all doors and liftgate closed. All doors and liftgate unlock when the ignition switch is turned from ON to ACC or to LOCK.
To change the mode you are in, do the following:
1. Set the interior lamp control dial to the door position.
See Interior Lamps Control on page 3-16.
2. Move the shift lever into PARK (P) and close all doors and liftgate.
3. Turn the ignition to ON.
4. Within five seconds after the ignition is turned to ON, press and hold the power door lock switch in
the lock position for about five seconds.
5. The interior lamp will flash to indicate that the mode has been changed. For example, if the lamp flashes once, the function has been changed to Mode 1.
If the battery is disconnected or run down, the mode is changed to the initial mode which is Mode 4.
Posted on Feb 23, 2009
will have to remove the door panel unless it has a small piece in the upper corner by the mirror. should have three 10mm nuts that hold it on.
Posted on Aug 27, 2009
Testimonial: "Thanx for your very quick response!!!"
move front seats forward.grasp seat cushion under front[where your heels would be if seated] and lift to release seat from 'clips' underneath.pull seat towards you to remove.push it back in firmly before pushing down to 're-clip'.
Posted on Oct 11, 2009
Testimonial: "Thank You, THANK YOU. I got the seat out! Your speedy & correct response is gratefully appreciated. Cleanup on progress."
Tips for a great answer:
Mar 08, 2015 | 2006 Pontiac Vibe
Jan 14, 2011 | 1999 Ford Taurus
Oct 26, 2010 | 2003 Ford Ranger Regular Cab
Jul 26, 2010 | 2002 Pontiac Grand Prix
May 13, 2010 | 1995 Mercury Villager
Apr 07, 2010 | 2006 Chrysler PT Cruiser
Nov 05, 2009 | 1996 Lincoln Town Car
Aug 27, 2009 | 2005 Pontiac Vibe
Apr 23, 2009 | 2005 Pontiac Vibe
Mar 07, 2009 | 1998 Saturn SL
105 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: