Question about GMC Cars & Trucks

1 Answer

92 GMC van will not shift from 2nd to 3rd gear.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 3,218 Answers

Depending on type of tranny it could be a variety of problems. Possible governor on the side of the tranny on older 350 turbo hydromatics. If 700 it will most likely be internal

Posted on Apr 12, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1995 GMC 2500 4x4 wont shift into 3rd or overdrive most of the times

i have heard that the ignition switch can be faulty and not let the full voltage thru to the electricaly controlled 4l60e trans.i have the same problem with my 95 1/2 t. i rigged a switched wire from the fuse block via a relay to the proper wire on the trans....ask a trany tech and they will know what im talking about,,,good luck

Posted on Oct 30, 2008

alicantecoli
  • 22156 Answers

SOURCE: hard shift from 1st to 2nd gear automatic

what year is vehicle please ?? as people often put it in wrong catagory ,if its mazada 2007 then its dealer only as a computer controls it all and the software is factory encrypted to stop general garages from repairing it .But check for a vacumn pipe loose under bonnet ,thin rubber pìpe from inlet manifold to gearbor or a diaphram switch,

Posted on Feb 19, 2009

  • 1146 Answers

SOURCE: 92 chevy s10 4x4 4.3L manual transmission no 3rd gear

Hi:

Your transmission has 3 shift rails...
1st - 2nd
3rd -4th
5th- Reverse

If your 3rd gear doesn't work , you have an internal transmission problem, such as a syncronizer, or similar fail... There is not much you can fix, without removeing the transmission.

Posted on Nov 30, 2009

drsinister69
  • 2317 Answers

SOURCE: 1998 Dodge Grand Caravan will not shif into 2nd

Most likely the second gear section of the transmission has gone bad. There are 3 or 4 different gear sections or assemblies in an automatic transmission, when they go bad, they go bad.

Posted on Mar 07, 2010

  • 108 Answers

SOURCE: my 97 chevy blazer won't shift past 3rd gear

Drop the pan, odds are the shift solenoid is out, its located at the front of the trans on the driver side. I'm sure your check engine light is on that will comment about the timing/shift solenoid being bad. I had the same problem with mine. The solenoid had plastic coming out of the inside. To remove it you'll find a small C clip holding it in, just take a small screw driver and pull the clip out. The part cost me like $36 from my local dealership. And its a longer solenoid. I believe its the 3-2 downshift solenoid. I do have the part number if you need it.

Posted on Apr 25, 2010

Testimonial: "Thank you so much. I actually thought this was the problem, but i didn't know. Thanks again!! send me the part number"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission slipping in 2nd gear


1 Ck A/T fluid level & quality
2 Scan/ck for code(s)
3 With scan tool connected,road test vehicle/Ck parameters....
....time for a pro !!

Apr 06, 2014 | GMC Sierra Cars & Trucks

1 Answer

Shift module


That transmission is one that has been used for years in Dodge and Plymouth vans. Do you know when the last time was that the fluid was flushed out and replaced? It's pretty important that it be done every 90K miles.......have it checked out.

Oct 30, 2013 | Dodge Ram 3500 Cars & Trucks

1 Answer

Is it ok to start off in 2nd gear and manually shift up to 3rd and then overdrive?


You can put the shifter in 2, 3, or overdrive. It will still start in first and shift up to whatever gear you have selected. Try it, you wont damage anythingl

Oct 22, 2012 | 1996 GMC Yukon

1 Answer

When my 2001 GMC Yukon tries to shift into 3rd gear or overdrive - it is like it goes into nutral. It never shifts to 3rd. 1st and 2nd gears does just fine.


this sounds like the pressure valve is going bad on third gear. cheap fix try Lucus transmission additive to increase the pressure.
To do it right go to a good transmission shop an have it serviced and flushed.

Sep 27, 2010 | 2001 GMC Yukon

1 Answer

92 chevy s10 4x4 4.3L manual transmission no 3rd gear


Hi:

Your transmission has 3 shift rails...
1st - 2nd
3rd -4th
5th- Reverse

If your 3rd gear doesn't work , you have an internal transmission problem, such as a syncronizer, or similar fail... There is not much you can fix, without removeing the transmission.

Nov 30, 2009 | 1992 Chevrolet S-10

1 Answer

Used transmission installed and doesnt shift at the right rpms


Ck your trans modulator., and if not already done, you pan filter and fluids

Jun 06, 2009 | 1992 Chevrolet C1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...