Question about Pontiac LeMans

1 Answer

How to replace a shift lever for a 1966 lemans

Posted by on

  • Timmy L Costa
    Timmy L Costa Apr 12, 2015

    Hi mark gelb, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? What trans do you have? Automatic or standard? Where is your shift lever? Floor or column?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Pontiac Master
  • 354 Answers

I think you mean the column shift lever which is replaced by tapping out the pivot pin from under the base of the shifter. It is a chrome colored pin and will only come out if you tap it LIGHTLY from the bottom.

Posted on Apr 12, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why is it hard to shift gears on my 1997 lumina.


if the shift process is through a cable then check the cable for wear and fraying, rust or dry. If it is through linkage check for worn /rusted /tight connections

Nov 13, 2014 | 1997 Chevrolet Lumina

2 Answers

In my 1980 Pontiac Lehmans there's a hesitation between gears and a minor transmission leak can I have some ideas also there is ticking under the valve cover


The first symptom on your Lemans can be a vacumn leak...check ALL rubber hoses, and the EGR valve hose for cracks, and replace as needed...a vacumn leak or imbalance can also alter the tranny shift points:(... Unfortunately the ticking under the valve cover sounds like a sticky lifter...You can try to lubricate this by changing oil...but use one quart of GM tranny fluid in place of one quart of oil...run motor for ONE day only, and then change oil again with the correct viscosity...10W30 I like Valvoline High Mileage:) Hope these inexpensive fixes work for your classic Lemans!!

Oct 02, 2013 | 1980 Pontiac Lemans

1 Answer

How do you remove the manual shift lever from a 1994 acura legend


YOU HAVE TO UNSCREW THE SHIFT LEVER KNOB. REMOVE THE CENTER CONSOLE.REMOVE THE RUBBER SHIFT LEVER BOOT AND THE DUST SEAL.YOU NEED TO RAISE SUPPORT VECHICLE ON JACKSTANDS ON LEVEL SOLID GROUND.YOU HAVE TO DISCONNECT THE EXTENSION ROD FROM THE TRANSAXLE.SIMPLY REMOVE THE BOLT THAT ATTACHES IT TO THE EXTENSION BRACKET.TO DISCONNECT THE SHIFT ROD FROM THE TRANSAXLE PUSH THE DUST BOOT FORWARD REMOVE THE CLIP AND DRIVE OUT THE SPRING PIN WITH A PIN PUNCH.DISCARD THE SPRING PIN.DO NOT REUSE IT.TO DISCONNECT THE REAR END OF THE SHIFT ROD FROM THE SHIFT LEVER REMOVE THE NUTS AND BOLTS.THEN REMOVE THE TWO NUTS AND WASHERS THAT RETAIN THE CHANGE BALL HOLDER TO THE UNDERSIDE OF THE EXTENSION ROD AND REMOVE THE CHANGE BALL HOLDER LOWER THE SHIFT LEVER DUST SEAL,SHIFT LEVER BALL SEAT,SHIFT LEVER AND EXTENSION ROD.INSPECT THE BUSHING AT THE FRONT END OF THE EXTENSION ROD AND REPLACE IT IF ITS CRACKED TORN OR WORN. REPLACE THE ORINGS IN THE BASE OF THE LEVER.BESURE TO LUBRICATE NEW O RINGS AND BUSHINGS WITH A SILICONE GREASE.USE A NEW SPRING PIN TO ATTACH THE SHIFT ROD TO THE TRANSAXLE.INSTALL EVERY THING BACK VISA VERSA.

Mar 02, 2011 | 1994 Acura Legend

1 Answer

Trying to remove the stick shift from a 1992 toyota pickup to replace the clutch


REMOVE TRANSMISSION SHIFT LEVER FROM INSIDE OF VEHICLE
    • Remove the four screws and remove the shift lever boot retainer.
    • Pull up the shift lever boot.
    • Cover the shift lever cap with cloth.
    • Then, pressing down on the shift lever cap, rotate it counterclockwise to remove.
    • Remove the shift lever.
62409690

Jan 22, 2011 | 1992 Toyota Pickup

1 Answer

1965 gto/lemans steering column


Check out faxonautoliterature. They have the original Pontiac service manual for your car, also wiring diagrams. This should help get you going again. I've used them before and had excellent service. Hope this helps.

Jun 02, 2010 | Pontiac GTO Cars & Trucks

1 Answer

How do you replace the shift lever shaft on a 06 yamaha ttr 230?


Yes. You need to remove the crankcase cover, oil pump, brake lever and clutch to remove it.

Sep 19, 2009 | 2006 Pontiac G6

1 Answer

Specs on torquing head bolts on 1988 pontiac lemans aka daewoo lemans aka passport optima. also do i need gasket sealer anywhere or gaskets only when doing a head job on this car?


firstly tighten in sequence to 20Nm all round, then tighten to 30Nm all round,then tighten 90 degrees all round, and finally tighten a further 90 degrees all round. if you taken head off you should replace gasket or just use gasket sealer if you cant replace, just replace the head bolts, dont reuse or they may break

Jul 24, 2009 | 1988 Pontiac LeMans

1 Answer

Does my Mustang have a low gear?


the C4 automatic transmission is a 3 speed transmission, it shifts by hydraulic pressure controlled by a governor and actuators, I would check your linkage to see that it is hooked up correctly to allow movement through all range selections, disconnect the linkage at the trans and see how many detents you feel while moving the lever back and forth, make sure to chock your vehicle as moving the lever from Park may cause the car to move. Let me know what you find, hope this helps

Jun 09, 2009 | 1966 Ford Mustang

1 Answer

1966 mustang will not shift up when driving.


The transmission probably needs a basic maintenance,try changing the transmission filter and fluid,this may clear the problem right up.Check the fluid t see if its a reddish brown color and cloudy,if it is its time to be changed.

May 17, 2009 | 1996 Ford Mustang

1 Answer

REPLACING MOTOR MOUNTS IN A 1966 PONTIAC LEMANS WITH A V8


1. GET THE RIGHT RUBBER MOTOR MOUNTS,

2.FIND THE MOTOR MOUNTS LOCATED UNDER YOUR ENGINE. MAYBE THREE. FRONT LEFT, RIGHT AND MIDDLE BEHIND,

3.JACK UP THE ENGINE A LITTLE BIT, PUT MOTOR MOUNT IN AND USE THE SAME SCREW TO TIGHT IT

4. CHANGE ONE AT A TIME.

5. STABLE YOUR CAR, BE SURE IT IS COMPLETELY SAFE, USE EMERGENCY BREAK AND A BLOCK TO STABLE THE CAR UNLEASE YOU HAVE HOIST.

Jul 08, 2008 | Pontiac LeMans Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...