Question about 2007 Hummer H3
Fuse box is under the hood. Black box about 11" x 8" Should say FUSES on top. top comes off and fuses and relays are inside. #61 is power seat fuse . Map of Fuse and relay numbers is on inside of top cover.
Posted on Apr 12, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Probably too late now, I am sure you have already fixed it, but mine did this and it was an electrical part that is mounted right beside the blower fan. The part was OK, but the plug into the part was arcing and burned out the connection. A Chevy mechanic told me this has been happening to MANY Chevy products. I had to buy a new part and plug assembly with new wires, about 100 dollars, and I spliced them together. It was an Easy fix, but I shouldn't have had to do it :(
Posted on Mar 07, 2010
I had the same problem and sloved it with the help of google images, hummer blower motor resistor. Under the glove box the blower motor resistor can be found. It comes loose and the blower will work at times. When I reached under and pushed the connector in, it works fine. It was fixed within minutes. I am a gal with a Hummer and save myself a huge dealer bill. Good Luck!
Posted on May 01, 2010
had thid problem and took it to a dealer. they showed me a resistor plug that is between the switch and the blower that melted. I can feel cold air but blower did not work . they said you cannot order the part but they have all the peices to rebuild it. hope the works for you!
Posted on Jul 01, 2010
I assume you've fixed this already given that nearly a year has passer by, but if others experience this, it may help them. Under the dashboard on the passenger side there is a Fan Blower resistor attached to a red connector with 5-7 colored wires. Its held in by two simple screws. Disconnect the connector and inspect it for any burn marks(usually the last orange wire at the end). If this is discolored go to the nearest GM dealer and by about $70 worth of parts. The blower resistor, the red harness connector and the clips that go into the connector. Job takes under an hour and would be rated at novice-intermediate. Advice: set the passenger chair back as far as possible. Remove the harness clips carefully so as not to break them. For more workspace you can easily pull out the plastic facia on the right hand side, it easily slips out from under the foot rail, do not be intimidated there are no hidden screws. There is also a relay down there; a small black box held in by one screw, you might as well change this while you're down there. A dealer may charge as much as $400 for this simple fix!
Posted on Jul 19, 2010
Tips for a great answer:
Apr 12, 2015 | 2007 Hummer H3
Jan 24, 2013 | Cars & Trucks
Jan 05, 2013 | Hummer H3 Cars & Trucks
Sep 29, 2012 | 2006 Hummer H3
Jul 29, 2011 | 2007 Hummer H3X
Aug 09, 2010 | 2006 Hummer H3
Sep 10, 2009 | 2006 Hummer H3
150 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: