Question about 2002 Toyota Corolla
Posted by Anonymous on
What engine is in it? As long as it fits properly in the sending unit assembly. and it has the proper pressure requirement I do not see why it would be a problem. As for me I would want to put the proper pump in it from the start. If you have the 1.8l engine I know a good pump will only run you about $60.00 to $100.00. And a cheap on only about $20.00. but I like to do the job only once so I go with the better pumps myself rockauto . com where I do a lot of my parts purchases.
Posted on Apr 12, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Fuel pump is accessed through a hole below the back seat. Remove the seat and there is a rubber round cover over each fuel pump. Fuel pumps are held in place with a large round retaining ring that is screwed off.
Posted on Dec 13, 2008
to check the fuel pump on you car you need to put ignition in the on position and open the butterfly of the MAF sensor that is mounted on top of your air filter. Toyota's fuel filter won't come on unless there is air going in the engine. your problem may not be the pump, so you need to check the pump properly.
Posted on Apr 30, 2009
HI.Your fuel pump is an integrated part of the pump module, which also contains the fuel reservoir, level sensor, inlet strainer and fuel pressure regulator. The inlet strainer, fuel pressure regulator and level sensor are the only serviceable items. If the fuel pump requires service, replace the entire fuel pump module.
There is no access panel. You will need to, slightly, drop the fuel tank, in order to extract the module for replacement. This module it mounted on-top of the tank. the module is inserted into the tank.
Posted on Dec 21, 2009
SOURCE: FUEL PUMP REPLACEMENT
the last one i did was under the backseat on the driver side. look for some wires going into a black cover. peel the cover off and remove the screws. be sure too disconnect the connecter. lift out the assembly, carefull not to bend the float bar. if you have a whole new assembly, connect and replace. if you just have the pump, pull out the old one, and replace with the new one. install exactly how you removed, only in reverse. if the fuel pump is not under the seat, then you have to drop the tank, and do the above procedure.
Posted on Aug 02, 2010
Tips for a great answer:
Mar 23, 2017 | 2002 Toyota Corolla
Mar 06, 2016 | 1988 Toyota Corolla 4 Door
Dec 17, 2013 | 1991 Toyota Corolla
Sep 18, 2012 | 2002 Toyota Corolla
Aug 07, 2011 | 2005 Toyota Corolla
Mar 25, 2011 | 2002 Toyota Corolla
Feb 13, 2011 | 2003 Toyota Corolla
Dec 11, 2009 | 1991 Toyota Corolla
Sep 09, 2009 | 2002 Toyota Corolla
37 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: