Question about Cars & Trucks

1 Answer

Steering does not work with control box - Cars & Trucks

Posted by on

  • raj somaiya
    raj somaiya Apr 12, 2015

    Hi Terry Palmer, There are many possibilities that can cause such problems. For step by step troubleshooting click the link below
    Free Car Repair Guidehttp://www.allcarhelp.com/2015/04/free-c...

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 166 Answers

Thanks for telling us.

Posted on Apr 12, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My horn isn't working on a Chevy equinox but it's a new horn. What could be wrong with it..and my cruise control don't qork. Is it my steering wheel?


Was Cruise Control working before the New Horn was installed? The power supply to the Horn, (input to ground wire) is connected to the Cruise Control Module (CCM). This CCM is wired to the Relay Switch Box located in the Engine Bay. The Relay Box cover will have a Chart indicating what function each Relay coresponds to. Your local autoparts store (AutoZone) can test the Relay Switch, and you'll know (if any Relay) need to be replaced.

The CCM is also wired to the Steering Wheel, but first passes through the Clock Spring Coil, located just behind the Steering Wheel. The Clock Spring allowes for the Function Buttons on the Steering Wheel to have power while Steering Wheel spins.

The Clock Spring can malfunction or break, its rare, but this will cut power to the Function Buttons on Steering Wheel. If ALL the buttons on Steering Wheel dont work, then the Clock Spring is the Culprit. The Coil may need to be replaced.

The Cruise Control Module itself may have failed and also would cause a few or all Steering Wheel Functions to quit working.

But first check the Relay Switch Box and examine the Harness Cables connecting (Steering Wheel--to--CCM--to--Relay Switch Box--to--Battery Supply).

Also if Cruise Control was working before the new Horn was installed and now not working, then most likely the Problem is a bad wire connection somewhere and/or is a faulty Relay.

(Any Questions/comments jtobias1020@gmail.com)

Feb 26, 2017 | Chevrolet Equinox Cars & Trucks

1 Answer

New power steering pump pumping fluid with no air but still no power steering


I would think the you might have a defective steering control box

Apr 29, 2016 | 2001 Ford F-350 Super Duty

1 Answer

Which fuse to change for steering wheel lights and gear shifter lights 2010 ford edge


It's not a fuse , the SJB - smart junction box controls these lights ! This is fords body control module . If the Heater / A/C control panel ,hazard switch ,headlamp switch , message center switch all work, it is not a fuse . The gear shifter I would say the bulb is burnt out . The steering wheel lights could be out because of an open in the clock spring . The clock spring is a device inside the steering column under the steering wheel that keeps your horn , cruise control , radio buttons etc... connected electrically . How cars clock spring works

Feb 04, 2016 | 2010 Ford Edge

1 Answer

1998 lincoln town car heat control not working steering wheel controls not working


strip out the heater control panel ,the knobs just pull off check that the control cable is attached to the heat selector if it is follow cable back to the heater box a check it is still connected to the flap control .two semi circular toothed components , the steering wheel controls may be a fuse so check fuse box under dash but if the heater cable has broken/pulled off this may just have dislodged the wiring connector to the wheel controls if both happened at same time let me know how you get on

May 06, 2014 | 1998 Lincoln Town Car

1 Answer

No power to the steering controls, air bag light on. This occured after the rack and pinion were replaced. 20 minutes after leaving the shop, there was a loud snap and light came on and no more power to...


check the main fuses in both fuse boxes, the one in the vehicle and the one under the hood. I'm not positive on your vehicle which one contains the blown fuse, check them with a meter if you have one, Now,, when you say steering controls are you saying that whatever is attached to your steering wheel has stopped working ( radio controls, stuff like that ?) unless they disassembled anything on your steering unit , they are probably right and its just one of those things. but if they did take anything to do with the steering wheel apart, I'd ask them again to double check the work, now if by steering controls your saying the car isn' steering correctly, then it has everything to do with the work they did, and I'd take it right back to them.

Oct 04, 2011 | 2004 Chrysler Pacifica

2 Answers

2006 chevy hhr power steering its hard to turn? Can u tell me where to find the 60 amp fuse location under the hood fuse box?


THIS IS A DEALERSHIP FIX ELECTRIC POWER STEERING IS CONTROLLED BY POWER STEERING CONTROL MODULE.IT CONTROL BY INFORMATION SENSORS LIKE TORQUE SENSORS IN STEERING WHEELAND VECHICLE SPEED SENSOR IN WHICH SPEED WILL AID IN STEERING.YOU GO 10 MILES AN HOUR YOU WILL RECEIVE FULL POWER ASSIST.YOU GO 25 MILE HOUR POWER ASSIST REDUCED.THIS STEERING SYSTEM HAS TO BE HOOKED UP ON DIAGNOSTIC EQUIPMENT AT DEALERSHIP YOU CANT FIX AT HOME.YOUR OWNERS MANUAL IN GLOVE BOX HAS ALL FUSE AND RELAYS LOCATIONS.

Jun 19, 2010 | 2006 Chevrolet HHR

1 Answer

Replacing heater fan motor in a Toyota Previa


Removal & Installation It may be necessary to remove the upper radiator shroud to perform this procedure.
  1. Open and support the hood.
  2. Disconnect the negative battery cable and wait at least 90 seconds to proceed working on the vehicle.
  3. Disconnect the power steering and coolant reservoirs.
8f8490e.jpg
Disconnect the coolant reservoir

4. Disconnect the coolant reservoir and power steering brackets from the side of the heating unit box.

64e6e78.jpg
Remove the coolant reservoir bracket from the side of the heater unit


aa7a886.jpg Separate the power steering reservoir bracket from the side of the unit also

5. Remove the two bolts that attach the upper and lower portion of the heater box. 6. Disconnect the control cable on the side of the heater unit box.
4557834.jpg
Disconnect the control cable on the drivers side of the unit

7. Remove the eight nuts retaining the unit.

0a7fea7.jpg
Remove the nuts (8) from around the heater unit

50e83e7.jpg
There are 4 nuts on each side of the unit

8. Disconnect the heater control valve bracket from the heater box.

9. Separate the top of the control box from the bottom.

cef3f25.jpg
Separate the upper case from the lower

Dec 02, 2009 | 1993 Toyota Previa

4 Answers

I own a 1995 Pontiac Bonneville SSEi. I have a


check the servo under the pasenger side glove box vacum line to it .
tap the relays and check fuses under hood.
check batery terminals, rear brake bulbs, towing trailer harness
vitally

Sep 09, 2009 | 1995 Pontiac Bonneville

1 Answer

CRUISE CONTROL QUIT WORKING ON 94 RANGER 4.0L 4X4


there is a control box for the cruise control behind the glove box . You can remove the cover by pushing in from both sides of the glove box door . the control box will be just inside the glove box to the top. it simply unplugs. any junk yard with an aerostar or ranger or explorer will have one of these control boxes fairly cheap. these control boxes are commonly known to just quit workingand are a very easy fix.

Feb 09, 2009 | 1994 Ford Ranger Supercab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...