Question about Cars & Trucks

1 Answer

When crank to start clock gos dark will not start come up with code 68

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cars & Trucks Master
  • 775 Answers

Hi,dont know what code means but if you put lights on and try and start the car and the lights dim then it could well be the battery,put a multimetre on the battery,black cable to earth and red cable to positive on battery put multimetre to volts you should have a reading of 12volts no less therwise battery has had it,replace.
hope this was some help.

Posted on Apr 12, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1993 dogde dakota would not start but it crank


Check primary voltage to ignition coil, engine cranking, dark green wire with orange tracer. Check the same wire at fuel injectors, that voltage comes from asd relay. I'm not saying the relay is faulty, check the crank sensor. Any applicable trouble codes?

Jul 03, 2017 | 1993 Dodge Dakota

1 Answer

Why wont my 2001 isuzu rodeo will not start and the clock is not on inside the car?


no power,
you meant , will not crank?
if yes, then does jumper cable cranks work? off running donor car?
clock, all clock is dead, but i bet you forgot to notice, lots of others things are dead. sure.
you key on, and the cluster lights up.
and the head lights work.
and you crank and it does what.>?
nothing/
clicks
or cranks.
or even starts.
in that order.

Jul 10, 2014 | Isuzu Rodeo Cars & Trucks

1 Answer

3rd cylinder misfire code 73


Okay, a Honda. I don't see a code 68 for that though. Code 9 is number 1 cylinder position sensor-this sounds like a crank position sensor? That may be the problem.
If you have multi port injection, check that injector 3 is pulsing and putting gas into the cylinder.
A new fuel filter wouldn't hurt, but I doubt it is causing a problem in only one cylinder. Check for vacuum leaks. Change the plug for #3. If still no help, check fuel pressure. Doesn't sound lean, either, although if fuel pressure is low, it might be. Spark plugs that are white is an indication of lean running, BUT I doubt that your plugs have been run long enough to determine that.

Dec 20, 2013 | Cars & Trucks

1 Answer

P0068 throttle


Well code 68 is for a situation where the throttle position sensor and map sensors are not in sync. One is telling the computer the throttle is open and the other is not.
Code 35 is for a problem with a turbo boost or bypass valve.
You could investigate code 68 but if your truck does not have a turbo it could be a computer problem.

Sep 03, 2013 | GMC Cars & Trucks

1 Answer

I have 08 Hummer H3 3.7 and show code P300 ! but get new plugs crank,cam and alternator i found one problem whit the alternator , start 14.8V charging and gos to 12.3V after 5 minutes ! i see some battery...


I AM LOOKING AT ALTERNATOR.IF ITS FAULTY.IT WILL CAUSE PCM PROBLEMS AND MISFIRE TO ALL CYLINDERS DUE TO WEAK SPARK TO IGNITION SYSTEM. CHECK YOUR WARRANTY THEY MIGHT FIX IT.STILL A NEW VECHICLE.

Jun 18, 2010 | 2009 Hummer H3

1 Answer

2002 Tahoe will not start


check and recheck all conections on battery and starter and grounds on battery and the ground on engine bblock and body ground or grounds,if not sure make another one ,check connections at battery ,it does sound like a bad ground to body and eng just make ur owne and see what happens

Jun 28, 2009 | 2002 Chevrolet Tahoe

1 Answer

2002 Tahoe engine will not start


Electrical problems are difficult to diagnose in person without testing ...however, it seems that you may be loosing the body ground, causing power loss to the clock and likely the computer as well. As the starter is able to turn the engine, likely there is no problem with engine grounding. While cranking, the accessory side of the ignition switch should remain "hot" otherwise you would loose the clock every time you started it up. If it's not a ground problem, I'd look at the ignition switch itself to make sure it's not dropping power to ignition system while starter is engaged. on some vehicles this can also happen at the starter relay if an ignition bypass is used to provide hotter starting spark.

Jun 28, 2009 | 2002 Jeep Liberty

1 Answer

98 chevy suburban wont completely start


check for spark at plugs or fuel pressure need both torun

Feb 26, 2009 | 2003 Chevrolet Suburban 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...