Question about 1995 Mercedes-Benz E 230

2 Answers

My car is sounding like it's going to cut off and shaking like it needs gas.

Test shows P0302 cylinder 2 misfire and P0300 multiple cylinder misfires and P04010 secondary air injection system. What does it need to be fixed?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercedes-Benz Master
  • 2,448 Answers

Can't say for sure but it sounds you have a problem with an air
pump.
A lot of engines use air pumps to add more air to the combustion chambers at ignition more oxygen nothing burns with out it .
The fuel system sounds like it has a fuel supply just not enough air .
I'm not an expert on Mercedes worked on a few but all engines work on the same princaples air intake fuel supplyed electrical ignition at combustion chamber and a way for spend gases to exhaust from the cycle of the engine so it can repeat .

Posted on Apr 12, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercedes-Benz Master
  • 3,218 Answers

Your vehicle will need to be assesed for the misfire. Most likely it is a spark plug/ignition coil to cyl2. A misfire can set other codes that will not be prudent once the misfire is taken care of

Posted on Apr 11, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why won't my car start?


P0300 multiple misfire
P0302 misfire cylinder 2
P0306 misfire cylinder 6

Apr 25, 2015 | Cars & Trucks

3 Answers

Codes P0300 P0302 P0303 P0304 P1176 P0133 P1300 P1580 P1543 B0423is running but having trouble building speed and going up hills


Codes p0300 random misfire, p0302-0304 misfire cylinder 2-4. P0133 o2 circuit slow response bank 1 sensor 1. P1176, P1300, P1580, P1543, B0423 r make specific which you didn't say this would cause the problems you are having.

Apr 07, 2015 | Cars & Trucks

1 Answer

Why is my 2003 gmc v8 envoy skipping & shaking


You are misfiring. If you have Autozone (or similar) research your check engine light, they will come up with one or more of the following codes P0300, P0301, P0302, P0303, P0304 etc. etc.P0308. The P0300 code refers to "Random/Multiple misfires" whereas the other codes refer to that particular cylinder (last digit) misfire. The P0300 code sets when 2 or more cylinders misfire (can be the same 2 over and over, but it takes at least 2 cylinders to misifre to set that code. The others only take one misfire to set the code. Now that you know what is happening, here is how to fix....
Takes all to fire a cylinder (Fuel, Spark, Air & Timing) properly. If you have random or multiple misfires, it is likely something that is COMMON to all cylinders - like the air intake/throttle body area - throttle body can get carbon buildup and not open/close properly. Check the fuel pressure to the fuel rail(s), fuel filter clogged? When you turn your key to the "ON" position, do you hear the fuel pump turn on (whine) and then shut off? No whine, means no fuel pump. Check all fuses and fuse relays related to the fuel delivery system. Check the distributor cap/rotor for any signs of carbon tracking/arcing. Do you have good spark from coil? Check wiring for the Camshaft Position Sensor/Crankshaft position Sensor for timing issues. Finally, check compression on all cylinders. Need good compression for combustion to take place.

For a single cylinder (example Cylinder #2) - Easiest to check is spark. Pull the plug and look at it. Is it wet and smell like fuel? If so, then swap it with cylinder next to it. If the problem moved, then its the plug. If the misfire is still on Cylinder #2, then swap the plug wire (both ends). If the misfire is still on Cylinder #2, then swap the coil. (see where this is going?) If the plug is dry, then check the fuel injector for operation. Noid light tester or you can get a long screwdriver and stick one end on your ear and the other on the injector - it should make a steady, rhythmic clicking sound if it is functional when caricon1.png is running. No sound? Replace. Is the plug oily? Check cylinder #2 for compression. No compression or little compression means either head gasket blown or bad/sticking valve (intake or exhaust) = big money to get fixed. Timing on one cylinder is hard to test without correct test tools. Timing is likely not a problem on a single cylinder misfire. Good luck.

Apr 22, 2014 | 2003 GMC Envoy

1 Answer

Random multiple misfire P0300, P0302, P0304 on 2006 Kia Rio


A competent mechanic will check all probable causes associated with these DTC codes.
Code P0300: Random-Multiple misfire detected. Probable causes:
1. Vacuum leaks, damaged hoses, or improper routing
2. Fuel contamination
3. Ignition system - Ignition module, coil, spark plugs and wires
4. Fuel system
Code P0302: Cylinder 2 misfire detected. Probable causes:
1. Control unit software in need of updating
2. Faulty PCM or ECM
3. Faulty fuel injector
4. Ignition system
5. Fuel system
Code 0304: Cylinder 4 misfire detected. Probable causes:
1. Control unit software in need of updating
2. Faulty PCM or ECM
3. Faulty fuel injector
4. Ignition system
5. Fuel system

Be sure the invoice enumerates all of these probable causes as having been checked. Also, some of the replacement parts installed earlier may be faulty.

Jan 19, 2014 | Kia Cars & Trucks

1 Answer

2007 Mercury Milan Premier V6 Misfiring


P0300 - Random multiple cylinder misfire
P0301 , 302 and 304 - Cyliners 1, 2 and 4 misfire
P0351 - Ignition coil A primary/secondary circuit malfunction
P0354 - Ignition coil D primary/secondary circuit malfunction

Nov 07, 2013 | Mercury Milan Cars & Trucks

1 Answer

Me aparecio el problema p0300, p0301, p0302 y p0600


p0300 random multiple cylinder misfire, 301 is cylinder 1 misfire and 302 is cylinder 2 misfire. p0600 is a communication link fault.

Sep 19, 2012 | 2000 Kia Sportage

1 Answer

Rough idle jetta 2001 1.8t when it's cold codes p0300 and p0302


p 0300 is random misfires and 0302 is no 2 cylinder misfire
most misfires are from dirty injectors rather than plugs
run a quality injector cleaner and see if there is improvement

May 03, 2017 | Cars & Trucks

1 Answer

Missing,viborating


Misfire could be a number of things:
a) spark plugs - change them if used over 15K miles - inspect/regap.
b) spark plug wires - change them if over 15K miles - inspect
c) ECM (electronic control module) - test with HEI (high energy ignition) tester.

The vibrating tells me that the engine is running on less than its normal compliment of cylinders - the shaking is produced by the imbalance caused in the engine by one (or more) cylinder(s)
not firing at all.

The "Check Engine" light probably is coming on due the the misfire condition. Go to Pep Boys or
Advance Auto Pats, where they'll tell you (free) your codes causing the "Check Engine' light to be
lit - the code coming from your truck's computer will probably be one or more of:
P0300 - Random/Multiple Cylinder misfire detected
P0301 - Cylinder 1 misfire detected
P0302 - Cylinder 2 misfire detected
P0303 - Cylinder 3 misfire detected
P0304 - Cylinder 4 misfire detected
P0305 - Cylinder 5 misfire detected
P0306 - Cylinder 6 misfire detected
P0307 - Cylinder 7 misfire detected
P0308 - Cylinder 8 misfire detected
P0313 - Misfire detected with low fuel

Jun 23, 2011 | 2009 Ford F-150

1 Answer

Vehicle missing,shaking,engine light comes on


Misfire could be a number of things:
a) spark plugs - change them if used over 15K miles - inspect/regap.
b) spark plug wires - change them if over 15K miles - inspect
c) ECM (electronic control module) - test with HEI (high energy ignition) tester.

The shaking tells me that the engine is running on less than its normal compliment of cylinders - the shaking is produced by the imbalance caused in the engine by one (or more) cylinder(s)
not firing at all.

The "Check Engine" light probably is coming on due the the misfire condition. Go to Pep Boys or
Advance Auto Pats, where they'll tell you (free) your codes causing the "Check Engine' light to be
lit - the code coming from your truck's computer will probably be one or more of:
P0300 - Random/Multiple Cylinder misfire detected
P0301 - Cylinder 1 misfire detected
P0302 - Cylinder 2 misfire detected
P0303 - Cylinder 3 misfire detected
P0304 - Cylinder 4 misfire detected
P0305 - Cylinder 5 misfire detected
P0306 - Cylinder 6 misfire detected
P0307 - Cylinder 7 misfire detected
P0308 - Cylinder 8 misfire detected
P0313 - Misfire detected with low fuel

Jun 23, 2011 | 2004 Ford F150

1 Answer

Engine light comes on - Code shows P0300 and then


OBD II 300 Random/Multiple Cylinder Misfire Detected

When the misfire monitor detects a misfire, it will trigger the check engine light with the specific cylinder number as the last digit in the P030X code. For instance cylinder 1 misfire is P0301, cylinder 2 is P0302 etc. In this case we have either multiple cylinders misfiring, or the computer simply can't determine the specific cylinder, and as such we are left with the P0300 in computer memory.

Possible Causes:

Fuel injectors, related wiring, sensors and computer issues
Running out of gas, or poor fuel quality
Evaporative emissions system (EVAP) concerns: fuel vapors leaking into engine
Incorrect Fuel Pressure
EGR system concerns: leaking EGR valve or restricted ports
Base engine concerns: low compression, valve train problems and timing issues
Ignition system concerns including, but not limited to:
Faulty spark plugs
Faulty coil or related wiring
Ignition module or related wiring issues
Ignition related sensor faults or wiring issues

Apr 04, 2009 | 1996 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
1995 Mercedes-Benz E 230 Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

yadayada
yadayada

Level 3 Expert

77202 Answers

Joseph Prosser

Level 3 Expert

771 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...