Question about Cars & Trucks

1 Answer

Would bad connection in the starter cause the ignition switch to not start

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,218 Answers

If the ignition switch is turned to the crank position and there is no starter operation the starter may be at fault. You will have to check and see if the start wire on the starter solenoid has power when the key is turned to the crank position. If there is power then the starter is bad . If no power there is an electrical issue to the starter

Posted on Apr 11, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not start,OR CRANK, NO NOISE


Do warning lights and gauges come on, when key is turned to on?
If yes, check for power on the small wire at starter solenoid mounted on the starter with the key held in start. If power at the solenoid, take starter off and test for a bad starter or solenoid. If no power at solenoid when key held over to crank, work back to the switch in the start circuit-starter relay, clutch or neutral safety switch,-power from the start wire out of switch is not getting to the starter solenoid.
If no warning lights or gauges work with key in on position, power is either not getting to switch (bad maxi-fuse or fuse link, or bad battery connections-clean and tighten, recheck)-or the switch itself is not sending power out. Check if battery is charged up. Check all connections and grounds for loose, poor connections.
The start circuit starts at the battery, then to ignition switch, then out of ignition switch on the start wire to the clutch switch (or neutral/park on automatics), and on , ending at the starter solenoid on the starter. Somewhere in your starting circuit, power is lost. Start at the battery-check charge, check connections, check ignition switch.

Aug 25, 2013 | Cars & Trucks

1 Answer

How to fixed wont start engine..


test the following and fix it. GOD BLESS you.fe35589e-c7d2-4fa3-a813-99841956a6cb.gif
If nothing happens when you turn the ignition key to the "Start" position, it means that the starter motor doesn't turn over the engine. Most commonly this could be caused by a dead battery;
If the battery checks out OK, but the starter still won't crank, there could be a number of possible reasons. Here are some of them:

The ignition switch could be bad - it's a common problem. An ignition switch is an electrical switch installed at the back of the ignition lock mechanism. If jiggling the key in the ignition helps start the car, the ignition switch should be checked first.
The starter solenoid control wire could have a bad connection.
The starter motor itself or a starter solenoid could be bad.
A neutral safety switch is bad. If a car doesn't start with the transmission in Park, but starts in Neutral, it could be caused by a problem with a neutral safety switch.
.
A problem with vehicle's security system or some other electronic control module (e.g., ECM, BCM) may also prevent the starter from operating.

Jul 27, 2013 | 2004 Chevrolet Aveo

1 Answer

Will not start / computer key?


test the following and fix it. God bless you

If nothing happens when you turn the ignition key to the "Start" position, it means that the starter motor doesn't turn over the engine. Most commonly this could be caused by a dead battery;
If the battery checks out OK, but the starter still won't crank, there could be a number of possible reasons. Here are some of them:

The ignition switch could be bad - it's a common problem. An ignition switch is an electrical switch installed at the back of the ignition lock mechanism. If jiggling the key in the ignition helps start the car, the ignition switch should be checked first.
The starter solenoid control wire could have a bad connection.
The starter motor itself or a starter solenoid could be bad.
A neutral safety switch is bad. If a car doesn't start with the transmission in Park, but starts in Neutral, it could be caused by a problem with a neutral safety switch.

A problem with vehicle's security system or some other electronic control module (e.g., ECM, BCM) may also prevent the starter from operating.
see the diagram attached and proceed.1e981703-9c1f-4bcc-b4b9-95d04805c4c5.gif

Jul 27, 2013 | 2002 Buick Park Avenue

2 Answers

My car has a hardstart


ses this causes and fix it. God bless you
Battery Corrosion: Over time your battery connections can become dirty, or corroded. This corrosion breaks the connection your battery has with the rest of the car, and it won't start. Try cleaning your battery posts and try to start the car again.
Bad Igntion Switch: If your battery checks out, but the starter is still silent, it may be a faulty ignition switch. Turn the key to the on position (not all the way to start). If the red warning lights on your dash don't light up (and your battery connections are clean), the ignition switch is bad. If they do light up, turn the key to the start position. The dash warning lights should turn off at this key position (most cars). If you're not sure, turn on the headlights. When you try to start the car, the lights should either dim (a lot) or turn off completely. If they do, your ignition switch should be ok. If not, the switch will need replacement.
Bad Starter Connection: Corrosion can not only keep your battery from connecting, it can affect any electrical component, especially the ones exposed to the elements like the starter. If you have a helper, you can test the connection by holding a circuit tester lead on the wire that engages the starter. This is the smaller of the two wires connected to the starter. Be sure no part of your body is near the moving parts of the engine - it could still start at any time! Have a friend turn the key and check the current. If you're getting current to the starter but it ain't spinning, it needs replacement.
10_13_2012_12_50_46_pm.gif10_13_2012_12_51_20_pm.gif

Oct 13, 2012 | Cars & Trucks

1 Answer

Switch is on, turn key, no signal to starter, no click no contack


COMMON CAUSES OF NO-CRANK NO-START

Low battery (Check battery voltage, recharge if low, or jump start with another vehicle or battery charger).
Loose or corroded battery cables (Inspect, clean and tighten BOTH ends of BOTH battery cables).
Bad starter relay wiring connections or ground connection (Inspect, clean, tighten wiring connections).
Bad starter relay/solenoid (Check for voltage at relay, if relay has voltage but there is no "click" when key is turned to start, replace relay).
Bad starter (Jump battery voltage direct to starter to see if it spins, or remove starter and have it bench tested at auto parts store).
Damaged starter drive or teeth on flywheel (Remove starter and inspect drive gear and flywheel teeth, replace damaged parts if necessary).
Bad ignition switch (Check to see if voltage reaches starter relay/solenoid when turn to start. If not, check for open P/N switch and brake or clutch pedal switch. Replace ignition switch if defective).
Open P/N safety switch, or open Brake Pedal Safety Switch (automatic transmission) or open Clutch Pedal Switch (manual transmission). Bypass switch with jumper wire to see if engine cranks, or use test light or voltmeter to check for voltage passing through switch when ignition is turned to start.
Engine seized due to bearing failure or internal damage (Use socket and long handle to see if engine can be turned by hand, if not engine is locked up).
Engine hydrolocked due to coolant leak from leaky head gasket (Use socket and wrench to see if engine rotates, remove spark plugs and see if coolant comes out or engine can not be cranked with plugs out).

Jun 15, 2011 | Ford Windstar Cars & Trucks

1 Answer

No power to starter


CHECK BATTERY CABLES FOR CLEANESS FROM CORROSSION AND TIGHT CONNECTION. IF NO POWER GOING TO STARTER COULD BE FAULTY STARTER RELAYOR FUSE ALSO BAD OPEN SOLENOID.IF ALL IS GOOD FAULTY PARK AND NEUTRAL SWITCH WILL CAUSE NO START PROBLEMS.IF DASH LIGHTS DONT COME ON WHEN YOU TURN IGNITION SWITCH ON CHECK IGNITION FUSE IF OKAY.FAULTY IGNITION SWITCH WILL CAUSE NO POWER TO STARTER.

Sep 05, 2010 | Daewoo Leganza Cars & Trucks

1 Answer

Where is the starter relay on a 1991 camry new starter no start condition 12v at trigger wire at starter


The starter relay is on the starter housing and is part of the solenoid. If you have 12v on the trigger wire with it connected to the starter and the ignition switch at START, then the problem is a bad ground connection either at the starter or battery. If you have 12v only with the wire disconnected and ignition switch at START, then you ignition switch is bad.

Feb 24, 2010 | 1997 Toyota Camry

2 Answers

Will not crank, battery is good, starter is good


Yes, there is a starter relay which is most likely the culprit.

Trace the red battery cable, you'll find the relay at the end of it. Disconnect the starter cable and the battery cable, but not the ignition switch leads, from the relay. Then test for continuity through the switch side of the relay when the ignition is turned to start.

If there is no continuity, the relay is bad.

More info, let me know.

Charlie

Aug 30, 2009 | 2004 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...