Question about 2006 Mitsubishi Colt

1 Answer

Green four wheel drive light flashes when driving normal operation.sometimes its trying to engage it self when in 2 wheel drive.works perfectly in 4-wheel operation

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 2,448 Answers

If it engages in 4WD and works noramly in 2 and 4 wheel .
Then I would look to the switches . A lose wire bad connection or if a cable is involved a slight adjustment
Dosn't sound like you have a big problem .You will have to do a little research on how the system works being some are vacuum with cable some electronic even the same vehicle same year im not sure what Mitsubishi used in the colt in that year .
But mitsubishi are build very well good engieneering

Posted on Apr 11, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Four wheel drive wont engage


try and give more detail eg. what make and model?

Apr 11, 2013 | Cars & Trucks

4 Answers

I HAVE A 2002, 4-WHEEL DRIVE, TOYOTA TUNDRA PICK-UP TRUCK. IT HAS A 4-WHEEL DRIVE PROBLEM. RECENTLY I USED THE 4-WHEEL DRIVE, IN HI-GEAR. IT PERFORMED GREAT. WHEN I DEPRESSED TO BUTTON ON THE DASH TO...


I was researching the recalls for the 2002 tundra and havent found any recall pertaining to the 4whl drive. Sometimes when people have their 4wheel drive locked in and drive on pavement for any length of time, whether it be just a couple of feet or a couple of miles, over time it creates a binding of the gears in your transfer case. Once the bind is so great, the engaging and disengaging starts malfunctioning and leads to bigger problems overall. I could be wrong about this being the problem that you have but I think its something to look into. It wouldnt hurt to put your vehicle up off all fours and release the bind if any by running through the gears while in 2 and rour wheel drive while all four tires can move freely and release. See if that works for you. Check your gear oil front , center and rear and use much caution when attempting this suggestion. Also refer to your owners manual troubleshooting section for other possibilities. Merry Christmas. By the way, the electrical switch should be covered in the troubleshooting section also.

Dec 04, 2010 | 2002 Toyota Tundra

1 Answer

Wont go into four wheel drive lights dont come on


mounted to the tranfer case you will see what looks like a window motor. Round with wires coming out. This is the actuator motor for the four wheel drive. A lot of times if they are not used the brushes will stick in the motor and if they do the four wheel drive will not engage. Sometime you can tap on the motor and it will work. You also will have a fuse for the four wheel drive in your fuse panel. Good luck, hope this helped

Feb 07, 2010 | 1990 Ford F150

1 Answer

2002 ISUZU TROOPER PROCEDURES TO OPERATE THE FOUR WHEEL ENGAGING


Just press the 4wd button on the dash at any speed up to about 40mph and press again to come out .
When you turn the key on and the oil and battery lights are on the little green 4wd light should be on too if its flashing or not on check your fuses in the drivers footwell.

Dec 21, 2009 | 2002 Isuzu Trooper

1 Answer

My four wheel drive doesnt work in my 87 s10 blazer , like when i put it in park to put it in gear the shifter on the floor goes into gear but the four wheel drive doesnt turn on ? is there any fuses or...


sounds like either a fuse or the do u have locking hubs that need to be engaged also when using 4 wheel drive there is actually only 2 wheels turning usually passenger front and driver back sometimes u also have to drive backwards to engage and also disengage 4 wheel drive finally it may be a transfer case problem check drive shafts and u joints make sure they are engaged

Oct 23, 2009 | 1987 Chevrolet S-10 Pickup

1 Answer

PUSH BUTTON FOUR WHEEL DRIVE FORD RANGER NOT WORKING


the transfer case is sticking from non use, change the lube in the case ( Ford ATF) and drive it for awhile it should be ok then.

Apr 07, 2009 | 1988 Ford Ranger

2 Answers

Trnsfer case wont engage


This vehicle has a solenoid on the front differetial that switches between 2W and 4W drive. The mechanism also contains a swtich that tells the truck what position it is in. Your problem may be a faulty solenoid. It is relatively easy to replace.

Dec 22, 2008 | 1999 GMC Suburban

1 Answer

Four wheel drive won't work


The motor for the four wheel drive engagement on the transfer case is notorious for sticking, try pulling it out and then operating to see if it works.

Nov 11, 2008 | 2006 Ford F-150

Not finding what you are looking for?
2006 Mitsubishi Colt Logo

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...