2002 pt cruiser code P0135 what does it mean?

Question edited for clarity.
Question moved to model category.

All in the link

https://www.google.com/search?q=2002+Chrysler+PT+Cruiser.+P1490

..

that's the software its using and has nothing to do with engine codes

I MEANS YOU ARE OVERHEATING MAKE SURE YOU HAVE ENOUGH ANTIFREEZE AND MAKE SURE YOU COOLING FAN IS WORKING I HAD A PROBLEM WITH 2 PT CRUISERS IT WAS THE WIRING GOING TO THE COOLING FAN IN FRONT OF THE RADIATOR TO CKECK THE FAN PUT YOUR AC ON THE FAN SHOULD AUTOMATICALLY COME ON IF IT DONT YOUR PROBLEM IS IN THE FAN

P0700 simply means there is a fault code present in the transmission module (TCM). P0740 Torque converter clutch circuit. This is usually caused by a worn out torque converter clutch which would involve replacing the torque converter and yes it would be expensive to repair if that is the cause. Diagnosis is usually made with a scanner and other equipment.

It means that your input and output shaft speed sensors see an error in the 2nd 3rd and 4th gear final drive ratios during the driving of the vehicle.

You can go to any chrysler dealer and they should give you the results, but generally this is a fault code for a bad air bag sensor and or controller.

Have a look at this:

http://www.obd-codes.com/trouble_codes/

Take it in & have it scanned, may only be a faulty solenoid or even brake switch may cause code & symptoms. Sooner you get it in, the cheaper it will probably be to repair it

This doesnt show up for your car and I was wondering if you could either cofirm it with him or get someone else with adifferent brand OBD 2 scanner to pull codes. Is your PT from europe?