Question about 1995 Chevrolet Camaro

2 Answers

I have 95 camaro that changed key and tumbler and the ignition dose not go past the on postion wont let me turn key far enough to start car u don't no y

Posted by Anonymous on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 10,875 Answers

I have 95 camaro that changed key and tumbler and  - 25640973-5sp5orn0xnhdqraxk0v0421v-4-0.jpg

25640973-5sp5orn0xnhdqraxk0v0421v-4-2.gif I have 95 camaro that changed key and tumbler and - 25640973-5sp5orn0xnhdqraxk0v0421v-4-5.jpgt/uploads/images/25640973-5sp5orn0xnhdqraxk0v0421v-4-5.jpg" alt="25640973-5sp5orn0xnhdqraxk0v0421v-4-5.jpg" class="h_mi" />

Posted on Apr 11, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,428 Answers

Most likely you didn't get it to fit into the switch correctly .
Try takeing it out again and realining it .If its the correct part it should work .Look AT IT CLOSELY make sure it fits correctly

Posted on Apr 11, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2005 honda civic ignition tumbler

Take it to a locksmith. You don't want to risk pulling it down yourself especially where the immobiliser harness is concerned, in addition Honda tumblers are really hard to source, the defectives ones will have to be removed. You need an experienced locksmith to do this.

Posted on Aug 03, 2008

  • 40 Answers

SOURCE: 97 olds aurora wont start

did you get the tumbler from the dealer because some have coded keys

Posted on Mar 05, 2009

stevenhurc
  • 450 Answers

SOURCE: ignition key wont turn

is it correct key? key and ignition barrel could be worn wiggle key around in ignition while turning? gently but fast wiggling.try lube in key slot also.
if not replace barrel and key

Posted on May 31, 2009

Molson02536
  • 3854 Answers

SOURCE: i have a 95 camaro that wont start crank sensor,

Check your fuel pressure at the shredder valve. If you don't have a fuel pressure gauge, you can get a loner tool at Auto Zone and get the proper fuel pressure readings you need for you car. I don't know which engine you have and the different engine's have different readings. Good luck and hope this helps on check the fuses, it could be a simple as that.

Posted on Nov 02, 2009

emissionwiz
  • 75822 Answers

SOURCE: 95 camaro, factory alarm wont let me start the car what

U will need to bypass the factory VATS (vehicle anti-theft system) system, it is very simple and all you need to know is at the web page link below.

http://vats.likeabigdog.com/

Posted on Jul 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ignition key turns loosely approximately 1/4 of the way but won't advance to start. Steering wheel feels,locked


possibly bad tumbler might change ignition, heavy key rings are responsible for a lot or ignition problems, lighten up your key rings

Jan 08, 2016 | 2003 Jaguar Xkr

1 Answer

2008 ford focus Any body have a problem with ignition lock module? key and tumbler is not turning the ignition switch far enough to engage start the car.


Some issues here, I'll give you a few thoughts. The antitheft system should have recognized that a key was not in the ignition. So something must have happened to the antitheft, but that is not a issue for the lock not turning enough. Some ignition switches have a sliding mount which times the mechanical distance of the control rod or cable that you are trying to move with the screwdriver in the ignition. This simply means that the ignition switch was secured too high on the steering column when it was mounted. Also some lock cylinders will fit inside the ignition but when they are installed 180 degrees off, it messes up the distance on the rod length. It is like the activating fixture(as say a half moon shape) is on the left instead of the right and now can not move the control rod far enough.

Getting back to the module, if it is not noticing you are not using a key and it starts and runs you have a problem. Hope this helps.

Oct 19, 2015 | Ford Cars & Trucks

1 Answer

83 camaro wont start, got new ignition switch and tumbler.


It's probably time to pull the starter off and have it tested. I think places like autozone or advance will check it free. Before you do that, make sure all connections are clean and tight.

Aug 02, 2015 | 1983 Chevrolet Camaro

1 Answer

My key wont go into ignition of my 2003 Cadillac deville. Are there any solutions to getting the key to go into ignition?


If you are unable to insert the key it might be because the tumbler has been turned past the point of key release it happens a lot with worn ignition tumblers try turning the ignition tumbler forward as if to attempt to start it without the key then try to insert the key if that doesn't work try turning it the opposite direction when you get it inserted you need to replace the tumbler asap if anyone who entends on stealing your car the knowledge that you have reported is enough to raise eyebrows of anyone who has bad ententions! I hope that solves your problem?

Mar 01, 2015 | 2003 Cadillac Deville

1 Answer

I have a 2002 sunfire... and i have trouble turning it on. Once it startes it is stuck there because it will not turn at all. Once it is in this position the wipes wont work, the windows wont roll down,...


sounds like you need a new ignition, reason nothing works cause once it doese turn over n starts the car the tumbler is stick in the starting position jus not far enough to keep the starter engaged but far enough the it still trying to go trough the start process which cuts the power to everything else till the ignition returns to the on postion

did you try jus turning the ignition far enough to when the starter engages jus let go of it so the car doesnt start and see if everything else still doesnt work if it dont i belive its the igniton

also with out starting it or engaging the starter as in just turning the key on to get power does anything work?

Jul 12, 2012 | 2002 Pontiac Sunfire

1 Answer

I cant find the tumbler switch on my 1990 ford thunderbird fuel-injected v6. every time i start the car the key wont stay in the run position. it will move back just far enough to shut the car off. if you...


It is the ignition itself. the place you put your key in is the ignition, or tumbler switch as you call it. You nee to pull the column apart and replace with a new ignition switch.

Jan 25, 2011 | Ford Thunderbird Cars & Trucks

1 Answer

Can't remove key from ignition...


The ignition cylinder has bent and or worn tumblers in it preventing the key to be removed. The only solution is to replace the lock cylinder. A locksmith will be cheaper than any dealership for repairing this. You can check local repair shops as well. Body shops even preform this work as well in most cases

Jul 10, 2010 | 1995 Chevrolet Camaro

1 Answer

I have a key inside the ignition it wont come and it wont start either what could be the problem its a mercedes c200 sports


Tumbler pins have fallen and key is stuck in. Take to a dealer or loacal MB shop to see if they can turn the tumbler far enough and have the tool to at least remove it.

May 08, 2010 | 1998 Mercedes-Benz C-Class

2 Answers

My 95 chevy camaro starting issue


sounds like its the ignition switch.the grinding noise you hear is probably the starter still engaged. thanks jeff

Nov 30, 2008 | 1995 Chevrolet Camaro

Not finding what you are looking for?
1995 Chevrolet Camaro Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...