Question about Chrysler Town & Country
The door is not a power door and does not has any power locking system on it.....i already checked the child lock...it is not engaged....please help
You need to remove the inside panel of this door, and confirm the inside lock button is broken...you can first try this at your local salvage yard...then do it on your Van...be sure to keep the assembly from the salvage yard...as you may need some of the pieces...the dealers still sell the complete assembly but cost is much higher...Hope this helps.
Posted on Dec 02, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
kind of hard but it can be done but what probly happen is that the child lock is hafe and hafe not ingaged or disangeged so it's stuck
Posted on Dec 05, 2008
Not sure if they are same on 2006 but there should be a couple of small rounded metal contacts, or similar, on door that meet with door post to complete the connection. When you find them, clean them off with a little fine steel wool or SOS pad, minus the soap, and see if that doesn't cure it.
Posted on May 18, 2009
I just had mine fixed at the dealer for the same problem. Their first response to me was "this happens ALL THE TIME". He said there is a little plastic pin in the door handle assembly and the pin has been known to slip out of the assembly. However, when they got inside, they said it was the actual door handle (inside) that was broken and had to replace the whole piece. So, the first step according to my dealer/servicer would be to check for the little plastic pin.
Posted on Jul 10, 2009
the door track cable on the right side will have a broken wire in it,the drivers side will be the door control module inside the door
Posted on Sep 04, 2009
The child safety lock should stop the door from opening from the inside as that is it's purpose however the external door handle should open the door. It sounds as though the actuating rod has disconnected some how from the door latch mechanism. this often happens when a "slim Jim" or hanger has been used to open the door incorrectly. You will have to find a way to get the door open so this can be repaired. Your best bet is most likely to have a dealer do this as I can think of no way to access the door release parts without damaging the interior door panel with the door closed.
Posted on Oct 31, 2009
Tips for a great answer:
Jun 10, 2014 | 2006 Chrysler Town & Country
Aug 18, 2012 | 2006 Chrysler Town & Country
Aug 13, 2010 | 2006 Chrysler Town & Country
Jun 01, 2010 | 2006 Chrysler Town & Country
Feb 15, 2010 | 2005 Chrysler Town & Country
Dec 31, 2009 | 2002 Chrysler Town & Country
Nov 13, 2009 | 2006 Chrysler Town & Country
May 18, 2009 | 2006 Chrysler Town & Country
Mar 12, 2009 | 2006 Chrysler Town & Country
49 people viewed this question
Usually answered in minutes!