Question about Honda Cars & Trucks
Call your dealership with the VIN.... IT HAD A RECALL!
2007 08 Honda Odyssey Recalled for Unexpected Braking Edmunds com
if your vehicle is not part of the recall, here is a forum with other owners of that same problem
Thread VSA problem
Gogle search is strong with this one!
Posted on Apr 11, 2015
You most likely have an ABS issue. You need to have the ABS system scanned for cods and repaired accordingly.
Posted on Apr 11, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
open the rear hatch. Between the tail light housing and the rear hatch opening there is a trim strip with two flush fitted flap doors. Insert a small straight blade screwdriver into the small slot on the tail light side of the flap. Pry gently inboard and the small flap will open (the hinge side of the flap is on the side of the rear hatch opening.) Now you can remove the screws that hold the tail lamp assembly in place. Finally, there is still a "spear point" clip that fits into a socket near the front outboard corner of the assembly. Gently pry with a tape wrapped screwdriver (avoids scratches) and force the assembly straight back. The clip should release and free the assembly so you can change the bulb(s).
Posted on Jan 24, 2009
open the rear hatch. Next to the brake light assembly, between it and the hatch there are two flap doors in the brake light trim. Take a small flat blade screwdriver and open these doors. The hinge side of the flap is nearest the hatch opening. when opened, the flaps will reveal two screws. Remove these. then wrap a flat blade screwdriver with some tape (protects the paint) and put the blade at the front outside corner of the brake light assembly. Pry gently rearward and a plastic spear point clip will release. With the assembly off, you can see how to twist out the bulb sockets and replace the bulbs. to replace, put the spear point clip in first, replace the screws, and close the flaps in the trim.
Posted on Mar 05, 2009
It may be as simple as your oil condition or oil level. If you have poor oil in your engine the VTEC system will not operate properly and when RPMs reach 2800 or so it will buck. If everything checks okay with the oil have the code checked for your check engine light/VSA light.
Posted on Oct 26, 2009
Tips for a great answer:
Jan 04, 2017 | Honda Pilot Cars & Trucks
Aug 25, 2015 | 2007 Honda Ridgeline
Sep 20, 2014 | 2007 Honda Odyssey
Mar 10, 2014 | 2007 Honda Pilot
Jan 10, 2018 | 2007 Honda Odyssey
Mar 12, 2010 | 2007 Honda Odyssey
Nov 01, 2009 | 2005 Honda Odyssey
May 04, 2009 | 2007 Honda Odyssey
Aug 19, 2008 | 2007 Honda Odyssey
552 people viewed this question
Usually answered in minutes!