Question about Cars & Trucks

2 Answers

ABS an break light stays on I have put on new breaks still on

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Cars & Trucks Master
  • 531 Answers

Usually, it's a broken wire to the wheel sensors or a broken sensor itself. I agree to scan for trouble codes to help you pinpoint the problem, but do a quick visual at your sensors at the wheel hubs usually right near the CV outer joint ring.

You won't have anti-lock capability, but your regular brakes will operate.

Posted on Apr 11, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,218 Answers

There is a problem with the ABS system. It will turn on both lights. You need the ABS codes retreived in order to isolate the problem and repair the malfunction. Your normal brakes will work just fine.

Posted on Apr 11, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyundai trijet just had abs ring changed on passenger front now abs light stays on and hand break light stays on. Help.


If a wire was broken replacing the reluctor ring, this would be the ABS light. Not the brake light. Check the brake fluid, check the E brake pedal/handle. The rings do break, I just weld them back in place. If they are gone, it gets a new axle.

Sep 11, 2016 | 2005 Hyundai Trajet 2.0

1 Answer

ABS light and Traction light stays on.


You'll have to check the wiring at the wheels for the wheel sensors.Wires tend to break at the plugs.

Sep 05, 2016 | 2010 Chrysler Sebring Limited

1 Answer

ABS and BRAKE lights


Did anybody said ABS sensor,could be bad.

May 05, 2013 | 2009 Dodge Avenger

1 Answer

Abs and traction control dash lites come on and off at various time..sometimes never come on


Your abs and traction control lights should only come on when you start to slide while breaking(ABS), and when your wheels spin in place when excelerating(TC). If those 2 things don't happen, which with some people they never do, you should never see the lights come on. Only when those mechanisms are in use do the lights come on. And they will always flicker as that is what abs and tc are, intermitant surges to break up the constant. ABS does this for obvious reasons...anti lock break, so when you slide, the abs "taps" the breaks in short bursts so they don't lock up. TC "taps" the exclelrator when it slips. Those "taps" are what trigger the lights on your dash, which is why they flicker and don't stay on.

Sep 26, 2012 | Cars & Trucks

1 Answer

Break lights are flashing and ABS light is on. When i put my foot on the break to start the gear shift does not go to drive it stays in park


Check & replace if necessary the brake pedal switch placed above pedals on the support.
If the problem still occurs you might access the ABS ECU (Electronic Control Unit) using diagnostic equipment connected to the data link connector of the car, in order to pull out all DTC (Diagnostic Trouble Codes) memored.
Then you will be able to replace bad piece(s) and fix the problem by erasing all DTC stocked inside ABS ECU & reset it.


Feb 21, 2011 | Volkswagen Passat Cars & Trucks

1 Answer

Hi;my chevy c k 2500 1995 motor 350- 5.7lt.transmicion 4-L-60 hold a stop caliper ,left side put stop and it don' stay back,the caliper is new and i put other caliper new


i GUESS WERE TALKING ABOUT THE CHEVY TRUCK THE BRAKE LINES BREAK OR LEAK AT THE ABS UNIT. THE BREAK HOSES CAN COLLAPSE INSIDE AND THEY'LL HOLD THE BREAK ON.

Jul 30, 2010 | 1998 Toyota Tercel

2 Answers

2004 suzuki verona Abs light stays on


You problaly need a new front hub assy. They have the abs sensor built in. You need to see what code you have for the ABS and it will tell what you hub is bad. Don Suzuki tech

Apr 14, 2009 | 2004 Suzuki Verona

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...