Question about 1996 Jeep Grand Cherokee

1 Answer

Why does my 1996 Grand Cherokee Laredo v8 5.2 liter have no spark?

Won't start read

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 11,067 Answers

Hey John how's it going ? First you need to see if there is battery voltage on the dark green an orange wire at the coil ! Do you have a DVOM - digital volt ohm meter ? You can buy one for $10.00 ! Or you could use a test light ! If you have no battery + voltage more then likely you have a bad ASD relay ! Now on the other side of thing's if there is battery voltage you need to see if the PCM is turning it off an on ! This is a white wire at the coil , a test light would work best here . Hook up the clip end to battery positive an the point end hold on the white wire connector end an have someone crank over the engine , the test light should flicker . This indicates the PCM is controlling the coil on an off ! Now if there is no control , more then likely you have a bad crankshaft position sensor ! No Spark Testing control testing

Posted on Apr 11, 2015

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

clarktravis8
  • 74 Answers

SOURCE: The interior lights for my 1996 jeep grand Cherokee Laredo

Hello and welcome to FixYa
The interior lights wont turn off cant because it can't get a conncetion definitely a headlight switch issue common problem for that make
Part # 05137535AA Headlight Switch Probably a dealer item very simple to change this yourself. Hope this gets you going.Please Rate Me. And you can always Ask Me.
1ak+f4pj7cbm32cuniyi2gaaaaaelftksuqmcc

Posted on Apr 27, 2009

  • 5 Answers

SOURCE: 1996 Jeep Grand Cherokee Laredo starter

This means it is the solenoid. But usually on those the starter and solenoid are one unit. They can be purchased individually, but it is usually almost as expensive as replacing the whole unit.

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

2000 Jeep Grand Cherokee Laredo 4.7 liter code reads p0307 turn the car off when I turn it back on started misfiring and sputtering and wont stay started now help


code p 0307 is misfiring on no 7 cylinder ====causes --- engine mechanical fault ---wiring---ignition/ fuel system--injector --ECT/MAF sensor---ECM
look for low fuel pressure or ignition control module

May 31, 2016 | 2000 Jeep Grand Cherokee Laredo

1 Answer

Ok my 2001 Grand Cherokee Laredo wont stay in park


Transmission sticks in reverse- won't go into park. - JeepsUnlimited

www.jeepsunlimited.com/forums/showthread.php?...won-t-go-into-park
Jun 14, 2013 - 12 posts - ‎5 authors 2003 6 cyl 4x4 Grand Cherokee Laredo automatic- Occaionally, when shifting from REVERSE TO PARK, my Jeep will stay in reverse. Typically its ... '2001 WJ'4,0L'42RE'NV 242'380000 km'ECE Compliant' ??????????? ??? ...

2001 jeep grand Cherokee laredo - CarGurus

www.cargurus.com > Questions > Jeep > Grand Cherokee
CarGurusJan 27, 2014 - 2001 jeep grand Cherokee laredo - Just purchased a 2001 Jeep GrandCherokee Laredo and ... It starts in PARK sometimes and sometimes it won't and I have to start it in Neutral. ... Hatch shuts flush, but won't stay shut. help!

Oct 22, 2015 | Cars & Trucks

2 Answers

Fireing order diagram


cylinder firing order is: is 1-5-3-6-2-4 .... In Jeep Grand Cherokee Laredo ...Happy motoring.

Sep 04, 2014 | 1996 Jeep Grand Cherokee

1 Answer

Dies while driving


had issue with my 1997, bad computer, twice(4.0 liter grand cherokee laredo) also with a 1995 cherokee, same motor, crank angle sensors go at 80k-100k miles.

Nov 12, 2013 | 1996 Jeep Grand Cherokee

1 Answer

1996 jeep grand cherokee laredo turns over but won't crank.


could be a number of things. could be as simple as a clogged fuel filter, plugs and wires maybe

Aug 22, 2012 | 1996 Jeep Grand Cherokee

1 Answer

Shuts off goin down the road and blows a fuse


you have a short,a hot wire touching ground.

Aug 15, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Where is the Oil Pressure Sending Unit 96 Jeep Grand Cherokee 4L


the sensor is located right above the oil filter, careful they crack very easily...but are really easy to replace...

Dec 03, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...