Question about 2009 GMC Yukon

1 Answer

Back speakers not working? - 2009 GMC Yukon

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 3,218 Answers

Check your audio controls and make sure the fade control is not set for front speakers only.

Posted on Apr 11, 2015

Testimonial: "That was the first thing I checked"

  • 2 more comments 
  • Brennan Gilmore
    Brennan Gilmore Apr 11, 2015

    That was the first thing I checked.

  • paulmacintyre
    paulmacintyre Apr 11, 2015

    Were the back speakers working at any point and time?

  • Brennan Gilmore
    Brennan Gilmore Apr 11, 2015

    I'm always in front so till someone mentioned it I never noticed Just bought it about 7 months ago

  • paulmacintyre
    paulmacintyre Apr 11, 2015

    Depending on sound system and if anyone else was at it.... There may not be any speakers. You may have to pull door skins and inspect for speakers and proper connections

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Back Speakers don't work.


Change the radio if it looks worse than the speakers. Or, go buy some junkyard speakers and try them out. If none of this works, sell the car.

Apr 01, 2014 | 2000 Jeep Grand Cherokee

1 Answer

Only one back speaker working drivers side


is the p/s speaker unplugged or blown

Oct 23, 2013 | Cars & Trucks

1 Answer

Front door speakers stopped working


more than likely the speaker wire

Aug 21, 2013 | Toyota Cars & Trucks

1 Answer

Speakers in back wont work


Highly doubt it. I would hook up a speaker that you know works to the connectors in your GMC and see if that speaker works. I ran wires from the connectors of my vehicle to the trunk speakers of another vehicle(because the are easy to get to). If the speakers of that vehicle works, then you know you have bad speakers in your GMC.

Jul 16, 2013 | 2003 GMC Yukon Denali

1 Answer

Is there a fuse for back speakers?


no there is no fuse if you have ab aftermarket radio and th speakers are not working i would recomend checking connections on back of radio if it has a stock radio check the connectors on speakers if there attached and still dont work you have blown speakers or bad wiring

Oct 28, 2012 | 2001 Mazda Protege

1 Answer

98 Durango Rear Speakers not working


look under back seat for preamp

Jun 01, 2012 | Cars & Trucks

1 Answer

My speakers at back does not work on my chevy 2007


First, check that the balance switchon the radio has not been set to front only. If not, then pull the radio out and check the speaker wires at the back of the radio for connectivity, if ok, then do the same for the speakers, remove them and check the wires. Hope that helps

Feb 04, 2010 | GMC Blazer Cars & Trucks

1 Answer

Radio is on, but no sound. 2003 Olds Silhouette.


I had avery similar problem with my radio. At first I would lose audio but it would eventually come back. Then I lost it for good. I replace the radio and that work for a bit and then replaced the speakers and they worked for a bit. Eventually no audio. I took the radio and speakers back to the tech who installed them and he found a short in the speaker wiring to the passenger speakers. He installed a jumper around the short and the new radio and speakers worked fine. Then I had him put in the original raidio and speakers and have had audio ever since.

Doug Crail
dscrail@yahoo.com

May 18, 2009 | 2003 Oldsmobile Silhouette

1 Answer

1988 Corvette Bose Radio Front Speakers only work periodically


try different speaker if works .its the speaker. if another speaker does the same .your radio is the problem.

May 01, 2009 | 1988 Chevrolet Corvette

3 Answers

Rear door speakers don't work w/ aftermarket radio in 94 suburban


You need to attach the blue wire on the stereo harness to the blue and white wire on the car adapter harness. they installed a small amplifier to power the rear door speakers and unless you connect those two wires then the speakers will not work.

Jan 05, 2009 | 1994 Chevrolet Suburban

Not finding what you are looking for?
2009 GMC Yukon Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...