Question about Cars & Trucks
My check engine light keeps coming on gives me code 128 FO7 5ID-146-P need help anyone knows about big trucks? Need help am on road in Pennsylvania!
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2005 dodge diesel codes!
the Code P0340, Camshaft Position sensor problem or Loss signal.
The Code P0341, Camshaft Position sensor Intermitent Signal.
The First step you should do is : Locate the Camsahaft sensor,
Is located On Right Front of the Engine..
It use a 3 wires Connector.
3-- Dark blue/Gray.
After you found it. Inspect the Connector. If is The connector in good condition.
Replace the Camshaft Position sensor...
Ok... I hope this help on your problem..
Thank you for use Fixya...
Posted on Sep 27, 2008
SOURCE: P0171 code and P0301 misfire.
I have a similar problem. I'm replacing the fuel pump and might get an aftermarket coil. The coil on my 5.2L Dakota is right behind the radiator on the front right side of the engine. Stupid spot! I'm surprised it hasn't melted!
Posted on Jun 16, 2009
usually if you start to hear a rumble, and by rumble i mean it sounds like a bunch of pieces of metal are clanking around in your exhaust then the catalytic converter needs to be repaired. It could also be the oxygen sensor which is located on top of the converter. Volvo did an interesting job of having them sit on top of each other.
Posted on Nov 20, 2009
Testimonial: "thank you for your answer, it has been very helpful"
I have a 2007 Volvo 670. The check vehicle ecu comes on. The fault code is MID 144 PID 191 FMI 5. THe truck won't go pass 1400 rpm, the speedometer doesn't work, the cruise doesn't work, the engine break doesn't work. I have to turn the truck off going down the road at highway speed for about 10 seconds and it'll go back to normal. Can anybody help?
Posted on May 21, 2011
Tips for a great answer:
Dec 18, 2015 | Cars & Trucks
on Dec 20, 2016 | Cars & Trucks
Mar 02, 2015 | Cars & Trucks
Oct 08, 2014 | Volvo Cars & Trucks
May 03, 2013 | 2005 Volvo XC90
Feb 16, 2010 | 2005 Volvo XC90
Sep 25, 2008 | 1999 Jaguar XJ
26 people viewed this question
Usually answered in minutes!