Question about Cars & Trucks

2 Answers

Where is the fuel shut off inercia switch? - Cars & Trucks

Posted by Anonymous on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,585 Answers

Two places I find them on cars (I work on a lot of different models and makes) is both on the passenger side. One is at the the right side of your foot behind the kick panel, there will be a hole there to put your finger in t push down on the reset. The other one is in the trunk. It will be either under the rear dash or behind the side carpet that lines the trunk towards the back, by the tail lights.

Posted on Apr 10, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 42,930 Answers

Do not know what make and model you ask of so can not tell you as different mfg's put them different places

Posted on Apr 10, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the inercia fuel switch on a 2001 ford Taurus?


Usually in the trunk on the right hand side.

Apr 10, 2015 | 2001 Ford Taurus

1 Answer

Fuel pumps not working. Have changed eec relay, fuel pump relay, checked fuse and inercia switch not triped. Any suggestions?


When you turn the key to "ON', or "START" the fuel pump should run just enough to pressurize the system, and shut off. When engine is actually started, the pump will run continuously. Sounds like the pump relay is not getting the signal to run the pump from the key being turned to "on" or "start". Also, some vehicles can sense fuel pressure so there may be an issue with that sensor as well. In other words it thinks there is proper pressure or maybe too much pressure and wont let the pump run. I am curious to know what you find.

Aug 19, 2011 | 1991 Ford F150

1 Answer

Turned of car, will not start it turns over, but doesn't seem to be getting any fuel


Try A SMALL SHOT Of Starting Fluid Sprayed into the Snorkel
Intake @ Air filter. If it Starts and Does NOT Run After Burning Starting Fluid the Fuel Pump Has Failed. (My Personal Hunch) is (FUEL PUMP FAILURE) BE SURE TO ELIMINATE THE INERCIA SWITCH< it is a fuel shut off switch >>>>> WARNING: Do not reset the inertia switch button if you see or smell fuel.

  1. Turn ignition switch to OFF.
  2. Check for leaking fuel in the engine compartment, fuel lines and fuel tank.
  3. If no fuel is apparent, reset the inertia fuel shutoff switch by pushing the reset button on top of switch.
  4. Turn ignition switch to START for a few seconds, then to OFF.
  5. Again, check for leaking fuel.
LOCATION


  1. Open luggage compartment door.
  2. Remove two screws retaining inertia fuel shutoff switch.
  3. Disconnect wiring harness connector from inertia fuel shutoff switch and remove inertia fuel shutoff switch.
  4. To install, reverse removal procedure.

Aug 17, 2010 | 1996 Mercury Cougar XR7

2 Answers

Fuel pump relay location 1999 ford F150 4x4 4.6L ?? ANY ONE???


Engine Compartment fuse panel ( driver's side fender ) relay 301. Layout with numbers should be on the lid ( numbers only, not the functions ).

If you did not get an owners manual with your truck ( purchased used / lost ), you can download one from Ford in PDF format:
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Makes it real quick to search for keywords.

Dec 08, 2009 | 1999 Ford F150 Regular Cab

1 Answer

How do locate the fuel pump relay


It is in the POWER DISTRIBUTION BOX Under the Hood in ENGINE Compartmend, There IS Also a FUEL SHUT OFF SWITCH Located Behind the Passenger KICK PANEL. It is Called - INERCIA SWITCH.

Nov 03, 2009 | 1989 Ford Tempo

2 Answers

Just replaced fuel pump,now it won't start, does that mean I have to replace sencors too. The fuel pump will not click on.


You should try the Fuel Shut off Switch or AKA-(INERCIA Switch)

The inertia fuel shutoff switch is located in the luggage compartment on the door hinge support above the left hand inner wheel house.

The location is clearly marked on the vehicle.

Nov 02, 2009 | 1993 Ford Taurus

2 Answers

I need to find a reset switch the fuel system.


Passenger side Kick Panel is the Fuel Inercia Switch

May 30, 2009 | 1987 Ford Econoline

2 Answers

Ford Explorer 1998 will not start


Does it just turn over and over?
Try the inercia switch... It's a fuel pump cut off switch, located on the passanger kick pannel.
You will have to pull the carpet back. It is a black box, with a red button on top. The button should be pushed in.....

Feb 02, 2009 | 1998 Ford Explorer

1 Answer

1998 ford exp


Try the inercia switch.. It's a fuel pump shut off switch, located under the passanger side kick panel.
It has a reed switch on top...

Jan 24, 2009 | 1998 Ford Explorer

1 Answer

Truck broke down wont start.


There is no Inercia Switch to reset Like Ford
Have you Double Checked All Underbody wiring for fuel pump ,OPEN In Pink/blk tracer fuel power lead,also
Oil Sending unit on most GM Vehicles have the ability to turn OFF GROUND to Fuel Pump Relay as a Proyection Against LOW OIL Pressure in engine.


Fuel Cutoff Mode
The PCM cuts OFF fuel from the fuel injectors when the following conditions are met in order to protect the powertrain from damage and improve driveability:
  • The ignition is OFF. This prevents engine run-on.
  • The ignition is ON but there is no ignition reference signal. This prevents flooding or backfiring.
  • The engine speed is too high, above red line.
  • The vehicle speed is too high, above rated tire speed.
  • During an extended, high speed, closed throttle coast down-This reduces emissions and increases engine braking.
  • During extended deceleration, in order to prevent damage to the catalytic converters

Dec 19, 2008 | 2004 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...