Question about Cars & Trucks

1 Answer

Changed Fuel pump after it was drowned in water and Now fuse M25 (Fuel Lifter)20A keeps burning every few hours..

I have changed to a new OEM fuel pump and now something is shorted the car dies and the fuse is burnt M25 20A. Tried a visual check for any shorted wires found ***** wire underneath driver side harness and wrapped it with Etape. if you can help me with wiring diagram or solution please. thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 45,332 Answers

They make and sell short finders better get one and learn how to use it .

Posted on Apr 10, 2015

  • Suhaib Farsi
    Suhaib Farsi Apr 10, 2015

    Are you sure of this? Never heard of this .. googled it .. came up with no such thing .. if you have a source sells that device please link me.
    Thanks

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to replace fuel pump on 1999 ford Taurus se


BEFORE YOU GO AND REPLACE THE PUMP RUN A FUEL PRESSURE TEST.

Mar 21, 2014 | Ford Taurus Cars & Trucks

2 Answers

1993 Buick Roadmaster keeps on blowing fuel pump/ecm in-line 20 amp fuse. Car stalled out in a parking lot, would not start, no fuel. Changed fuel pump, fuel filter, fuel pump relay. Found fuel pump/ecm...


Sorry to say it could also be a faulty ECM. The ecm uses circuit boards to provide grounds to a bunch of components and can short out internally.
Most of those components can fail and cause the same problem by causing a short "thru" the ECM. Things like injectors, O2 sensors, and so on.
I doubt you will find the problem without a book and some test equipment.

Jun 29, 2012 | Cars & Trucks

2 Answers

I drove my car a half mile away from my house and the engine shut off and my check gages light came on my heads-up display. We talked to a few mechanics and they said there was not enough fuel pressure so...


While the key is in the last position before the start or during starting, check if you are getting fuel to the fuel line to the engine. If there is none then the fuel pump fuse or relay may have gone bad or the fuel pump itself.

Jun 18, 2011 | 2002 Pontiac Grand Prix

1 Answer

We have changed the fuses for the fuel pump 20 amp and it keeps burning out n stalling the car without warning we have change them twice n keeps burning out


there may be a shot in the wires to the fuel fuel pump or the pump is drawing too much current. its will need to be replaced

Jan 16, 2011 | 1997 Dodge Neon

1 Answer

I had to replace the fuel pump and I changed the fuel filter and then I did the spark plugs. know I have no voltage back at the fuel pump please help


Hello! Lets check a few things...In the engine compartment fuse box is fuse N (20A) good?

Next reset the inertia fuel cut off switch...It is located at the rear of the cargo compartment on the passenger side...See diagram...Also test the Dark Green/Yellow wire on that switch with the key on...Must have + 12 volts...If resetting the switch is no help and +12 volts is not present on the Dark Green/Yellow wire the problem is looking back at the fuel pump relay...But lets check what I've given you first...Guru.............Saailer

d4e019e.gif

Oct 12, 2010 | 1995 Ford Windstar

1 Answer

1998 Neon. Fuel pump problems...


Has the car been running one day and won't start the next and thats why you replaced those parts? This may be the distributor ignition modual later then when it is going out can act like its got demon in it. This modualator will shut power down to your fuel pump.

Now you can try something first though. Run a wire from a hot wire to the fuel pump and see if it will start and run while that wire is hooked up.
If it does then you can find a wire that only becomes hot when the key is turned on so the pump won't run all the time and only when the car is running. This is called gerry riggen in the service and not the proper way to do it. You may get an engine line on because of it too which will put the computer into trouble mode and cut your power down. But maybe not. Try it and see what takes place. If it still won't start then we need to look into testing the ignition modualator. Keep me informed and I will be glad to help you in the matter as well. Raz

Apr 17, 2010 | 1998 Plymouth Neon

1 Answer

I ran out of gas in a 1997 Chevy Blazer, put gas in, but still won't start.


The fuel filter may be to dirty to let the gas flow through and will need to be replaced, or most common when you run out of gas is the fuel pump will burn it self out. The fuel in the tank will keep the fuel pump cooled and will keep it from burning out, if you ran it out of gas. The pump may have burn out and will need to be replaced. Check the fuse first and hope the fuse blown due to the extra amp drown from the pump running without fuel. If the fuse is good, then check to see if you can hear the fuel pump start up when you turn the ignition key to the run position. Note the fuel pump will only energize the fuel line for 5 seconds, so you need to listen for the pump to turn on right away. The other thing too, is you can check the fuel pressure at the shredder valve, there should be 62 to 65 PSI when energizing the fuel line and will drop around 5 PSI when the engine is running. Make sure you do not try to start the engine by pouring gas down the throttle body, it been know for the gas to catch fire in the intake manifold and burn up the fuel injector system which is very costly. Start with the simple and check the fuses and fuel pump, then replace the fuel filter. At worst, your going to have to replace the fuel pump by dropping the gas tank and don't forget to replace the wire harness from the fuel pump to the frame. Good luck and hope this helps, keep me posted. Be glad to know you got your Blazer running again soon.

Dec 09, 2009 | 1997 Chevrolet Blazer

2 Answers

Changed fuel pump on 99 gmc sierra and has gone out again in less than 2 months, any suggestions what could be causing it?


Did you change the fuel filter? A partially clogged fuel filter will burn up a brand new pump. Otherwise I would suspect you just got a brand new bad fuel pump. Has happened to me twice, so it is possible. Some parts I pay more for to get the OEM brand. Fuel pumps, water pumps, heater core, etc. Any hard to replace part, I buy from the dealer or from a parts store that sells the OEM brand.

Aug 03, 2009 | 1999 GMC Sierra

4 Answers

97 gmc sierra no fuel no spark replaced ign module and pickup coil still no spark


1996 GMC 1500 Pickup.
Replaced Coil, Dist cap/Rotor, Ign Mod & pick-up.
All showed to be bad with OHM meter.

20A ECM-B fuse keeps blowing out and I'm afraid to burn these new parts up....

ANY IDEAS OUT THERE???

Mar 31, 2009 | GMC Sierra 1500 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...