Question about Mercury Cars & Trucks

Open Question

How do I reset my transmission control module on my 99 mercury sable

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75005 Answers

SOURCE: Transmission Control Module

We are not a parts service, but try an internet search for used VW parts, there are many VW only wrecking yards, that is your best chance of finding it. Also call VW and see if they sell a rebuilt module.

Posted on Nov 03, 2008

  • 899 Answers

SOURCE: no heat/99 mercury sable

its not a fuse if the blower motor works , you have a clogged or bad thermastat, bad water pump or your radiator heater core is clogged

Posted on Nov 25, 2008

emissionwiz
  • 75005 Answers

SOURCE: Where is the DRL module on a 1999 mercury Sable?

JUST TO THE BACK OF THE MAIN HEADLIGHT SWITCH ON THE LEFT OF THE STEERING WHEL.

Posted on May 13, 2009

  • 436 Answers

SOURCE: Where is the wiper delay control module located on

the module is located under drivers side dash right of the steering column. it is gray plasticmodule, the most common problem with these modules is soldering on the board. If you resolder these points the module should work for you.

Posted on Aug 25, 2009

alicantecoli
  • 22095 Answers

SOURCE: firing order for 99 mercury sable 3.9 v6

153624

Posted on Apr 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 mercury sable transaxle light is flashing and jerks when trying to go forward seems to move ok in reverse.


You need to the transmission control module scanned for fault codes, one is recorded whenever the light starts flashing.

Mar 16, 2017 | 2002 Mercury Sable

1 Answer

What does it mean when my transaxle light comes on I have a 2000 mercury sable


It means that the Transmission control module has detected a fault in the operation of the transmission or its controls. You now need it scanned to see what fault code or codes was set in the memory of the TCM.

Sep 29, 2016 | 2000 Mercury Sable

1 Answer

How do I get my transmission out of safe mode in my 99 mercury sable


find the trouble code & reset / clear it

if it does come back with the same code, then you'll have to either rollup your sleeves and get that bad part replaced and / or trace the wiring to whatever solenoid or sensor that failed

until you do so, your vehicle will protect the transmission by not going past that set speed limit

Apr 10, 2015 | Mercury Cars & Trucks

1 Answer

Where is the neutral safety switch on a 1997 mercury sable?


It is part of/incorporated into the transmission range selector switch. The switch is under the hood on the transmission where the shift cable connects to the shift post. See picture


1s5345__ra_p-bkvjhdzelpjlw0huprrsvouc-4-2.jpg

Jun 24, 2017 | 1997 Mercury Sable

1 Answer

How do i take the dash board off my 1999 mercury sable


Hi...i have a 99 Sable..my heat temp only stays on 90...even if the controller is set at 65...the temp always is 90... how do i remove the dashboard to get to the heater/ac controls???

thanks
Michelle

Dec 28, 2010 | 1999 Mercury Sable

2 Answers

Where is the ignition control module located on a 1995 mercury sable 3.0 v6


For 1995 Mercury Sable 3.0L EFI 6cyl the Control Module-Ignition is located: Under hood, center, upper engine area, mounted on side of distributor.

Hope helps (remember rated this).

Aug 11, 2010 | 1995 Mercury Sable

2 Answers

99 sable


The transmission is should be controlled by the tcm "transmission control module". The first item to check would be a good visual inspection. If all seems in the norm, then the fluid condition and level. You have to check the transmission level when the car is running at operating temp and in park. If that is ok, the next item would be to have the code read. Autozone will scan your car for free. Once you have a code, it may give a hint as to what system is acting up. That is where I would start.

Dan

Sep 04, 2008 | 1999 Mercury Sable

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

fordexpert

Level 3 Expert

5467 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...