Question about 2001 Dodge Dakota

2 Answers

Left signals front and back work fine. Passenger signals flash rapidly, rear flash working rapidly, front not working.

Replaced the bulbs, didn't work. Any advice?

Posted by on

  • Steve May 20, 2015

    Check to see if there is power going to the pigtail. You can usually do this with a testlight.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Expert
  • 45 Answers

Wire for the said lamp may be broken.

Posted on Apr 10, 2015

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 81 Answers

Check the fuses, that should help.

Posted on Apr 10, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TURN SIGNAL


rapid flashing indicates a bulb is burned out.

Feb 23, 2014 | 1983 Mercedes-Benz 300-Class

1 Answer

Left turn signals won't flash, Right side works fine. Replaced front and rear turn bulbs (rear was burned out). Bulbs come on fine on the left side, they just won't flash.


Gday mate, we had a problem with another late model vehicle similar to that, the bulb that was put into the reverse light was not exact brand product ( ohmage was slightly wrong ) and fowled up computer, correct bulb in place and disconnect battery to reset K A M ( keep alive memory) problem solved, BEWARE, some vehicles cannot have KAM reset except for dealer computer tethered reboot , just try putting the factory correct bulb(s) in and see how it goes, geoff. hope this helped.

Feb 11, 2012 | 1998 Buick LeSabre

3 Answers

1993 plymouth acclaim turn signal flashes rapidly, new flasher didn't work.


bad earth on a back light i suspect providing their europeon standard lights with yellow seperate indicators and not them funny american ones with a stop and tail and indicators all on the one bulb

Jun 27, 2011 | 1993 Plymouth Acclaim

4 Answers

Left rear turn signal does't work but blinker in car blinks rapidly, front left turn signal does work


Sounds like a burnt out bulb, that fast blink is to tell you a bulb needs replaced.

May 04, 2011 | Dodge Intrepid Cars & Trucks

1 Answer

2001 Toyota Avalon - Rear signals


Check the front lights. Usually if i flashes fast it indicate a bulb is out on that side.

Aug 02, 2009 | 2001 Toyota Avalon

4 Answers

Front signal light not working and rear signal lights flashing fast on 1999 intrigue


Your front turn signal socket is shot. Buy a new one at the dealer for about 30.00. It will fix it. You may be able to clean it and wiggle it to get it to work. But it wont last very long. I had the same problem. Replaced the socket and it is fine. Note: If one side is bad the other side it not far behind. Probably 2 or 3 months it will go also. Good Luck.
Bill

Apr 17, 2009 | 1999 Oldsmobile Intrigue

1 Answer

Rear lights work when turned on. No brake lights or rear turn signals. Front turn signals flash more rapidly. Replaced both rear bulbs with no change


if you're getting a more rapid flash in the front you have a possible blown relay to the back. Check fuses first and see if those are out.

Mar 23, 2009 | 1996 Chevrolet K1500

1 Answer

Rear flasher not working front flasher flashing rapidly


with the blinker on hold the socket in your hand and wiggle on the bulb and see if it starts to blink. if so then you have a bad socket that needs replaced or sometimes can be cleaned and apply electrical grease. if you cant get the bulb to blink then get in vehicle and watch the signl indacator while putting pressure on the selector in which ever direction your having problems with. if you get it to work properly by doing this then you will need a new switch .

Jan 29, 2009 | 2003 Ford Explorer

1 Answer

Turn signals flashing rapidly


This fast flash is caused by a burnt out bulb in the front or rear.

Nov 05, 2008 | 1998 Oldsmobile Intrigue

Not finding what you are looking for?
2001 Dodge Dakota Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...