Question about 2009 Pontiac G5

2 Answers

The front turn signal and sidemaker lights don't work. I just replaced the bulbs.

The front left turning signal don't lit or flickered when I action the arm attached to the driving wheel.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 81 Answers

Check the fuses.

Posted on Apr 10, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 1,326 Answers

If it's only the left one does it light if not could be bad socket or wiring. If ii lights check ground

Posted on Apr 10, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alpha Romeo 156 My Left hand indicator light stays on continually, does not flash. and when I turn the hazard light switch on both indicators continually glow.


Generally speaking, symptoms of a bad or failing turn signal bulb are usually the culprit...in your case, either it's the front left or rear bulb. Varies for different vehicle makes...common signs include:
  1. turn signal light staying on solid
  2. or blinking very fast
  3. or either sides of the bulbs stop blinking altogether.
To test this, make sure you reconnect everything you disconnected.
Turn the left signal light on; go to the front of the vehicle, is the turn signal bulb illuminated? If it lights up, even though it is not blinking obviously the bulb is okay. If it doesn't, replace it- problem solved. You'll do the same procedure for the rear turn signal Is that lit up? If not replace the bulb and the problem is solved.
Another common failure is when the turn signal blinks really fast, same procedure as mentioned above.
If both bulbs for the left side and right side illuminate but don't blink, the problem is in the steering column turn signal switch.
If the left or right side blinkers don't work properly at all...then check the integrated hazard warning/turn signal flasher relay- that may be defective; again, that's usually the case if both sides of the signal light don't work.
If you are blowing any fuses related to the flasher system, you have an electrical overload in the turn signal circuitry.

Feb 12, 2017 | Cars & Trucks

2 Answers

Turn signal


because of no light flasher on left side the front one will go faster .maybe the left rear light is burn. and brake lights are control by the brake switch on brake pedal hardware, might be unadjust

Sep 12, 2013 | 2001 Pontiac Grand Prix

2 Answers

1997 Dodge Neon left signal lights work great. Right side blinks very fast.


Has the car been in a fender bender ? check for wiring going to the front and rear lights to see if on has rubbed into a ground wire or the body. ( even if there has been no accident.)

Apr 18, 2013 | 1997 Dodge Neon

1 Answer

2003 Jeep liberty right front turn signal


why skip RR lamp? what does IT DO? be like 1st 1st look.
dim, out, fast?

the rapid is talking to you
it means current is wrong,
shorted, or open lines. to the right.
its the wiring
if the bulbs are like 1157 brass base bulbs
why not replace them first , they can short inside,
asking online for guessing is silly, why listen to 10 examples for this.
but is cut wires.
shorted wires.
keep i mind the blinker asks funny for both opens and shorts
its a feature, that.
low current or too much.

the acid test is connect 2 TEST bulbs in parallel to the multi-function switch output right side,
blinks ok now, bingo bad lamps or bad wiring, from there to the right side.

if the hazard fails you never said????
if rigth front is dim or dead the bulb is blown or shorted
if new bulb there , then the wires are shorted.
to it.
the only help on line worth squat is how to test and use your meter.
you can, check for voltage
you can check continuity on that line (its just 1 wire)
and check for shorts on that wire to ground (lamps pulled right side to do that, lamps read 0 ohms cold)
look for collision damage RF? behind lamp sockets?
be first.
in my book.
looking is always first. sure.


I have your SM book open now, chapter 8w-50
the haz/blink module has just 2 pins, left and right out.
pin 3 on the module runs front and rear blinks, (a fact to know)
RF is BR/RD, brown -red stripe?
all comments USA on USA forum. USA car.
ok?

the right side lamp (sidemaker) only blinks turns if parks ARE oFF

Id try 2 new blinker lamps front and 1 rear.
that be first. or test the lamp on a battery , and no not get burned fingers hot wring a shorted lamp.

wish i knew
what rear did
and what both did on HAZ
out, dim or to fast.

Mar 23, 2017 | 2003 Jeep Liberty

1 Answer

1996 chevrolet C1500. The back left turning signal/brakes light is not working. Front left turning signal works fine.(Faster than usual). The bulb comes on when the headlights are on(steady), but does not...


The bulb for the turn signal/brake light is a double filament bulb. It will come on with the lights on, but should light the second filament, making it brighter, with the brakes applied or turn signal on. It could just be a bad bulb, but one common problem on these years of truck is the rear light circuit board and requires the whole assembly to be replaced. Start by checking the bulb first though.
Hope this helps. Good luck!

Apr 18, 2011 | Chevrolet C1500 Cars & Trucks

1 Answer

When I press the brake my head lights flicker when i drive, my blinkers will also not blink, but remain lit and make a strange buzzing noise


Don't know what type of vehicle you have other than a Chevrolet. I would check and see if any of the bulbs are burned out. Most vehicles will not flash a turn signal if one of the bulbs are burned out. You can set your emergency 4 way flashers on and do a vehicle walk around and see if they are working. If you find one out, I would suggest replacing bulb along with the rest of the turn signal bulbs, both the front and rear. (They are all the same age and will burn out soon, so this could save time) This should clear up your problem.

If you find them all lit but not flashing, you could have a bad flasher unit. If the four way works but the left or right turn signal does not work, you could have a bad turn signal switch in your steering column. The bulbs are relativly easy to replace depending on your vehicle model, and most auto parts stores would be willing to help if you are not able to do this yourself. the flasher and turn signal parts are more involved and mgiht have to be taken care of at the dealer if you are not able to replace them yourself. Please write back with more detail of what you find if you need more help.

Thanks.

Jan 01, 2011 | Chevrolet Silverado 1500 Cars & Trucks

Not finding what you are looking for?
2009 Pontiac G5 Logo

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...