Question about Chevrolet Cars & Trucks

Open Question

What are the steps to remove the heater core in a 1984 g30 chevy caravan motorhome

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Heater core

HEATER CORE REPLACEMENT

Posted on Jun 21, 2008

ewashmidas
  • 362 Answers

SOURCE: How to change a heater core in a 1999 Chevy Malibu?

Before starting this job I would get a repair manual. This is not a easy job, 6+ hours for an experienced tech with all of the right tools. And you may have to discharge and recharge the AC system.

Posted on Jan 30, 2009

coupedeville
  • 97 Answers

SOURCE: 1984 Jeep CJ7 heater core leaking

  1. Disconnect battery ground cable and drain cooling system.
  2. Disconnect heater core hoses.
  3. Disconnect damper door control cables.
  4. Disconnect blower motor electrical connector.
  5. Disconnect water drain hose and defroster hose.
  6. Remove nuts retaining heater housing assembly to instrument panel. Remove heater housing assembly by tilting heater downward to disengage it from air inlet duct and pulling toward rear of vehicle.
  7. Remove heater core from heater housing.
  8. Reverse procedure to install.

Posted on Nov 17, 2009

sledge1863
  • 149 Answers

SOURCE: step by step instr. to remove heater core

It would be best to obtain a haynes manual about $15 from local auto supply store as it has pictures as well as instructions. Not an easy job.

Posted on Jan 14, 2010

motor1258
  • 6674 Answers

SOURCE: were can i find the

You may have a mechanical fuel pump, usually located at front lower part of engine. Follow fuel line back from Carburetor. If fuel injected, it will be in gas tank.

Posted on Oct 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace water pump on 1984 350 G30 Lazy daze Motorhome


same way you do it on a big truck . lots of work and busted knuckles . I pay a good mechanic to do mine .

Oct 18, 2015 | Cars & Trucks

1 Answer

Where is heater core located on 96 dodge caravan


Inspect/Replace

If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core

Dec 03, 2012 | 1999 Dodge Caravan

1 Answer

Where is the fuel filter on the 1983 Chevy g30 van?


My 1984 G30 Diesel has two filters. One is under the van below the side door on the passenger side. The other is under the engine cover inside the Van mounted to the engine itself it is rectangular.

Apr 03, 2012 | 1984 Chevrolet Sportvan G30

1 Answer

Were can i find the fuel pump and filter in a 1984 chevy g30 motorhome?


You may have a mechanical fuel pump, usually located at front lower part of engine. Follow fuel line back from Carburetor. If fuel injected, it will be in gas tank.

Aug 30, 2011 | 1984 Chevrolet Sportvan G30

2 Answers

Where is the heater core on a 2005 grand caravan


If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 22, 2010 | 2005 Dodge Caravan

2 Answers

Removal of heater core


Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Dec 08, 2010 | 1984 Mercury Marquis

2 Answers

How to replace the heater core


Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core.
When a heater core leaks, a new heater core is installed or the old one repaired.
Heater Housing
  • The heater housing is usually under the dash and must be removed to gain access to the heater core.
  • Procedures for replacing the heater core vary with the year, make, and model of car. It threfore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
f74-01.gif The heater housing is disassembled to get to the heater core. Heater Core
  • Remove the access panels(s) or the split heater/air conditioning case to gain acess to the heater core.
  • Remove the heater coolant hoses.
  • Remove the cable and/or vacuum control lines (if equipped).
  • Remove the heater core securing brackets and/or clamps.
  • Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing.
  • To reinstall the heater core, reverse the removal steps.
When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.

Nov 28, 2010 | 1984 Ford F 250

1 Answer

Antifreeze leaking into cab under glove comp.


heater hose or heater core you can solder the heater core if you can find the leak oh and if the rest of it is good

Nov 22, 2009 | 1984 Chevrolet Chevy

1 Answer

Heater core


HEATER CORE REPLACEMENT

Jun 21, 2008 | 1986 Chevrolet G30

1 Answer

1982 G30 Chevy Van power steering fluid


Find the power steering pump. The fluid goes in the top of the pump. Look for a twist off cap that has a measuring stick attached to the under side, when you take it off. Make sure you use the correct type of fuild for YOUR kind of vehicle. There are diffrent types for different makes of vehicles. Don't OVERFILL the pump.

May 15, 2008 | 1984 Chevrolet Sportvan G30

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...