Question about Cars & Trucks

2 Answers

What's your question? Hi I have uno mia 1100 can you please tell me why +terminal on battery spark when I start the engine due to this my engine gets very hot in just a few minutes. Pls help

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 2,024 Answers

Make sure you battery cables are tight. Loose and corroded cables will cause sparking and burn the cables out with heat as well the car will not perform the way it should. Its good to take the cables off the battery and clean the connections off with baking soda and a little water and when you put them back on the battery put a little grease on them as well.. Making sure the connections are tight before doing this.

Posted on Apr 10, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 45,324 Answers

Loose connections cause heat

Posted on Apr 10, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My uno mia 1100 wont start i buy new destipitor petrolpump en new ignison but stil not start


New ignition switch? New key as well. Immobilizer/Alarm needs pairing. Put key in ignition, disconnect battery for 3 hours. Connect battery, wait 15 minutes.

Aug 09, 2017 | Cars & Trucks

Tip

How to jump start a vehicle safely


You have a dead battery and need a jump start. There is the right way and the wrong way to accomplish a jump start safely. Because of the potentially severe hazards due to improper use of jumper cables it must be done correctly. Auto batteries contain Sulphuric Acid which can blind you, or at the very least burn your skin. Also auto batteries vent off Hydrogen Gas which is highly explosive even from the slightest spark. Because of this danger it is critical to attach the jumper cables in a precise sequence. 1. Park the vehicle with the GOOD battery close to the vehicle with the BAD battery but do not let the vehicle touch each other. Make sure the cables are not routed so as to touch any moving parts, such as a fan blade. 2. Attach the jumper cable Positive + terminal to the GOOD battery Positive + terminal. 3. Attach the other end of the jumper cable Positive + terminal to the BAD battery Positive + terminal. 4. Attach the Negative - jumper cable terminal to the GOOD battery Negative - terminal. 5. Attach the last jumper cable Negative - terminal to a heavy metal ground part of the engine and NOT to the dead battery Negative - terminal. Reason being this last connection will cause a spark, and you do not want a spark next to the battery where it could ignite the Hydrogen. 6. If the engine of the donor vehicle with the good battery was not left running, start the engine and let it run for 2-3 minutes to put a charge in the bad battery. 7. Start the vehicle with the BAD battery and then remove the jumper cables from the batteries in the exact opposite order you installed them.

on Jun 19, 2010 | Honda Accord Cars & Trucks

2 Answers

What could be the cause of no spark on my uno mia 1.1 99 or 00 model


Have you replaced the spark plugs and checked the leads,have you got enough fuel?

Aug 01, 2014 | Fiat UNO Cars & Trucks

1 Answer

CAmbelt timing 0n 1400 Fiat UNO pACER 1995 MODEL


Whats the firing order on uno mia 1400 my kar wane start but keep failing I replaced the cambelt and drive belt and the module on the acnition also the roter now the firing remains the problem could you please send me an imige or video anything to explain the firing or what maybe might be the problem thanks

Feb 08, 2013 | 2006 Fiat 124

2 Answers

The car will not start...not getting a spark or any fuel to the engine...


hi...

this is because there is no power goin to the engine.there is a relay which controls the sparks when you start this relay might have damaged and not working. so please check this realy and repalce if necessary.

check the battery terminals.the wire connecting to this terminals are properly secured up and the teminals are clean

if my answer was usefull please vote me

Jun 25, 2010 | 1999 Oldsmobile Aurora

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...