Question about 1994 Toyota Camry

1 Answer

How do i access the license plate light bulbs

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 4 Answers

Access behind the bumper the wires lead you right to the light socket. The problem is theses bulb sockets corrode. Replacement sockets have to be purchased and wired in. They can cost $6.99 all the way to $39.99. I purchase two for under $20 at a local auto store. I used a soldering iron and heat shrink tubing with a heat gun to repair mine - they already outlasted the original sockets lifetime. They do sell some kits that pierce the wire avoiding soldering and heat shrink tubing BUT if you live anywhere up North where it snows or down South near the salt air from the beach - the wires will corrode where pierced. My truck just turned 15 years old this year. Springfield, MA

Posted on Apr 10, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Plate light does not work, but lights are good and sockets seem good


check bulb the number plate light runs on the same circuit as the side lights so if they are working its got to be a bad earth on the plate light

Jan 24, 2016 | Cars & Trucks

2 Answers

Tail lights work but why don't license plate lights?


The license plate lights have their own separate bulbs. If you are able to replace the bulbs, that may solve your problem. If not, you may have a loose or rusted connection to the plate bulbs only. If you are able to gain access, you may want to check the condition of the harness that supplies the power to the license plate portion. Good luck and have a great day.

Aug 30, 2015 | 2001 Toyota Tacoma

1 Answer

How do i change a rear license plate light bulb on a 2008 dodge avenger


Most license plate lights use a sliding lock on lense, most have to be pushed to left while putting slight pressure on lense to remove and gain access to bulb.

Aug 16, 2014 | Cars & Trucks

1 Answer

How do I get to the license plate bulb for a 2004 nissan sentra


There are 2 bulbs above the license plate, each under a plastic cover. The covers are held in with 2 screws each. Just unscrew and remove the plastic covers and you should be able to access the bulbs.

Mar 21, 2014 | 2004 Nissan Sentra

1 Answer

HOW TO CHANGE LICENSE PLATE LIGHTS ON 2004 PRIUS


Here is an article on switching over to the LED bulbs, but it shows you what must be done to access the lic plate bulbs as well.

Nov 04, 2012 | 2004 Toyota Prius

1 Answer

Need to replace bulbs that lights license plate. License plate and light is part of trunk


raise trunk lid look on the inside behind your license plate light there should be access to the bulb there. You will see the wires going in to the bulb there will either be a flt plate that can be removed to access bulb or where the wires enter there will be a round socket that you can twist counter clockwise and remove the bulb socket for bulb replacement. hope this helps.

Jan 15, 2011 | 2003 Lincoln Town Car

1 Answer

How do I replace the license plate bulbs?


The license plate lights are accessed by unscrewing the lens. The backup lightbulbs are accessed with the trunk lid open, behind the cover.

Jan 13, 2010 | 1992 Honda Accord

1 Answer

How do I change the rear license plate light bulbs?


License Plate Lights Removal & Installation License plate lamp retainer clips
a555c7b.gif
To Remove:
Remove or disconnect the following:
  1. License plate
  2. Pin-type retainers and the luggage compartment lid trim panel
  3. License plate lamp electrical connector
  4. Lamp socket from the license plate lamp
  5. Using a suitable tool, through the access hole, release the clips and remove the license plate lamp
To Install:
  1. Install or connect the following:
  2. License plate lamp
  3. Lamp socket to the license plate lamp
  4. Electrical connector
  5. Luggage compartment lid trim panel
  6. License plate

Jun 06, 2009 | 2000 Lincoln LS

3 Answers

Licence light replacement 1996 Cadillac Deville


remove your license and behind it you will find i think two screws then remove that panel and you should be able to get to it.

Jan 22, 2009 | 1996 Cadillac DeVille

1 Answer

Burned out license plate bulb


open trunk,

remove felt liner from rear of trunk, (liner directly behind rear lights in side trunk) should be 4 plastic Phillips head screws. Loosing screws, then slowly peel liner away. You will see 3 nuts on each side, removing these nuts will loosing the rear light lenses, so you can pull the lense away from the body from the out side to gain access to the license plate bulbs. Re-install in reverse order. While in there I would recommend replacing your brake light and reverse light bulb. Hey your already in there might as well do a little preventive maintance.

Dec 12, 2008 | 1995 Lexus ES 300

Not finding what you are looking for?
1994 Toyota Camry Logo

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...