Question about Toyota Cars & Trucks

1 Answer

No ground for stereo in my 2000 Toyota camry Can't find it is it body grounded

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 2,039 Answers

Yes julie any metal in the dash gonna do the trick i included a couple of video to help sorry didnot no the year of your camry

Posted on Apr 09, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

tbirdfan1
  • 3051 Answers

SOURCE: Remove stereo from 2003 toyota camry

Hi there :
if you remove the knobs you will see there is some flat nuts that need to be removed remoive them and there should be able to remove the faceplate

Posted on Feb 17, 2009

dsacco86
  • 1077 Answers

SOURCE: P1410 Code on a 2000 Toyota Camry

P1410 EGR Valve Position Sensor Circuit Malfunction
You may have to replace the sensor. If you get a chilton manual at an autoparts store, it will show you how to test the sensor with some test values in the book. The book should run about $20

Posted on Apr 05, 2009

  • 1861 Answers

SOURCE: 2003 Toyota Camry - Both Brake lights not working

Lok in the trunk on the left side, behind the carpet for a small plastic box with a bunch of wires going to it. Look to see if there is brake light powe coming in with the pedal depressed. If so, and no power is coming out, you need to order and replace the "taillamp failure sensor".

Posted on Jul 16, 2009

  • 1 Answer

SOURCE: toyota tacoma 2007 stereo wiring

Radio 12v blue/yellow + radio harness
Radio Ground brown - radio harness
Radio Ignition gray + radio harness
Radio Illumination green + radio harness
Factory Amp Turn-on N/A
Power Antenna N/A
LF Speaker +/- pink - purple +,- radio harness or amplifier
RF Speaker +/- lt. green - blue +,- radio harness or amplifier
LR Speaker +/- black - yellow +,- radio harness or amplifier
RR Speaker +/- red - white +,- radio harness or amplifier

Notes: If equipped, the amplifier is on the passenger side rear cabin wall.

Posted on Oct 28, 2009

  • 1374 Answers

SOURCE: how do I clean air vents in 2000 Toyota Camry

If your talking about the a/c and heater vents basically put a vacuum cleaner in front of them. The same holds for blower motor intake ports. First clean debris from under wipers by hand then vacuum.
Lastly the a/c evaporator hose should be drain and cleaned. basically get under vehicle with eye protection and use a tongue depressor to clear the hose of debris. Be careful cold water will pour out and be gentle with deopressor no need to go deep into hose you can puncture evaporator. Thats big money$$$$$$.

Posted on Jul 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Want to put a digital watch from toyota camry 2000 into my suzuki Maruti gypsy but don't how to wire it. Please I need help.


You need a 12 volt wire that is always hot even when key is off and a ground wire to the body sheet metal of the dash.

Jul 07, 2016 | Toyota Cars & Trucks

2 Answers

2000 camry electrical short?


Michelle, I would recommend taking your vehicle to a local Car Stereo Shop or the dealer. It sounds like your son may have tapped into the incorrect wire in the harness when putting in the new stereo. It sounds like a problem of ignition wire is going to ground. Or the constant power wire is going to ground. Either of these issues would cause this problem.

Mar 01, 2014 | Cars & Trucks

2 Answers

My name is Monty, I have an 89 toyota camry and I installed a radio adapter kit for a pioneer stereo and when i finished, the dash lights quit working and i was told to check the dimmer switch for the...


Toyota has a very bizarre methodology making there gauges and dash lights operate, you should take all this apart and just replace the switch. there is a measure of resistance in the switch itself that reduces the current to "nominal" so it keeps the wire from overheating from over draw.

Feb 28, 2014 | 2000 Oldsmobile Silhouette

1 Answer

I hear my car through my speakers


Chances are that you have the ground for the stereo or the amplifier not grounded well enough, to bare metal. This can create a ground loop, which then creates a whine in the speakers when the alternator winds up and down. You can either get a better ground or go to Radio Shack and buy a ground loop isolator and install that inline into your stereo setup.

Aug 20, 2012 | 2002 Toyota Camry

1 Answer

I have 94 camry will not run no check engine light no ground for check engine light from computer no ground to mass air flow we have replaced the brain,distrib,coil,ignitor,all relays no bad or blown...


Check all ground connections. Battery to motor ground battery to body ground and motor to body grond strap. Take off all fastening bolts to check underneath as they can look fine but be corroded underneath. Ground problems can cause all kinds of electrical malfunctions.

Jul 29, 2010 | 1994 Toyota Camry

1 Answer

Headlamps inoperative daytime running lamps come on then go out jumped out headlamp switch ground circuit out still no headlamps.


It sounds like your DRL RELAY/Headlight relay. I had this happen with a 2000.

Please rate me if this helps You.

Here is some info that I hope is helpful to you.

This first part is how to disable the DRL
TOYOTA. From the Toyota technical service bulletin EL011-00 Web site for specific models determine where the module is; either the DRL relay or the body ECU, connector number, pin #. Oct 6,2000.

Avalon 1999 DRL relay D4 pin 1
Avalon 2000 body ECU B5 pin 6
Camry S/D 99* DRL relay D6 pin 23
Camry S/D 00* DRL relay D6 pin 10 *twilight sentinel
Camry Solara99/00* DRL relay D6 pin 23
Celica 2000* body ECU B6 pin 17
Corolla 99/00* DRL relay D3 pin 23
ECHO 2000 DRL relay D2 pin 12
4Runner 2000 DRL relay D8 pin 2
Land Cruiser 99/00 DRL relay D8 pin 2
MR2 Spyder 2000 DRL relay D2 pin 12
RAV4 99/00 DRL relay D17 pin 2
Sierra 99/00 DRL relay D4 pin 2
Tacoma 2000 DRL relay D8 pin 2
Tundra 2000 DRL relay D7 pin 2
-disconnect battery- Then remove the wire with pin attached and tape to the harness. (consider just cut and tape the wire) -check operation- [except the 2000 MY-Avalon, additionally you need to ground the wire at the module end of the cut wire]


And here is the Headlamp relay part number.

1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif 1pixel.gif ACDELCO 1pixel.gif 1pixel.gif E1717C 1pixel.gif 1pixel.gif [RELAY-HEADLAMP] RELAY,HDLP OEM#89057700 ALL MAKES

Mar 19, 2010 | 1998 Toyota Corolla

1 Answer

Must you use double grounded sparkplugs(2000 Camry,2.2L)or can NGK iridium plugs be used?


If they sell NGK Iridium plugs for it then they should be just fine. Dealership trying to tell you that you need to use double grounded?

Mar 17, 2010 | 2000 Toyota Camry

1 Answer

Instrument panel lite on 2000 toyota camry indicates backup lites out lites are on but very dim replaced all bulbs and fuses still doesnt work need help


Check for adequate grounding of these sockets!

A good bulb that's dim usually indicates a weak or broken ground path.

You should be able to use a test lead to offer the socket a good ground. If the dash light goes off, problem solved!

Dec 09, 2009 | 1998 Toyota Camry

1 Answer

How to install a starter on a 2000 Toyota Camry


Disconnect the ground cable, remove the cables connected to the starter, remove the two bolts that are holding the statter to the body of the transmission and remove the starter motot out.

instalation is the reverse of removal!!!

Nov 16, 2009 | 2000 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...