Question about Cars & Trucks

2 Answers

I have 3 cars and 2 has different license plate than I reported to you originally. Where can I go to report the change?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Master
  • 884 Answers

Hi
I am mildly intrigued, as I have two cars and the licence plates are different, but this is normal as the licence plate is what identifies the car to the authorities, and from this they can identify whether or not it is insured, taxed etc etc.
Surely you should be reporting the cars with the same licence plates, so that one of them can be changed so that you have 3 cars with 3 different licence plates.
Cheers

Posted on Apr 09, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cars & Trucks Master
  • 827 Answers

Go to your dmv

Posted on Apr 09, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I check on a cars license plates to assure me they are the ones registered to a potential used car purchase


Contact the DMV and supply the VIN#. They will inform you if the vehicle is registered leagally. You can also call police with plate number to see if it has been reported as stolen

Aug 02, 2015 | Cars & Trucks

1 Answer

I have 3 cars and 2 has different L plate.Where do I go to report it?


Im not sure i get your question you have 3 car 2 of them got different license plate you mean the front and back dont match if so somebody remove your license plate i would make a police report and after go to the dmv

Apr 09, 2015 | Cars & Trucks

1 Answer

Renault master went into garage for routine cam belt change 2 weeks ago. Replacement was initially done without using the kit, taken for 2 mile test drive and conked out outside the garage. now just runs...


Sing up full member with the AA first call for inspection on the spot and given you full written Report this document make a copy only and give to him .Notes don't give the original tell them what his dun on your car after the Report.good luck.

Oct 02, 2012 | Cars & Trucks

1 Answer

How do i change the license plate bulb on a 2004 tb ls


here is the instructions on how to replace license plate bulbs.

Remove the 2 screws that retain the license lamp lens to the liftgate.

  • Remove the license lamp lens from the liftgate.
  • Remove the bulb (1) from the socket.


  • 8e7cf48.gifaba90ae.gif

    Oct 11, 2010 | 2004 Chevrolet TrailBlazer

    1 Answer

    Change tag light bulb


    1. Remove two screws retaining the lamp to the rear license plate lamp shield.
    1. Rotate socket one quarter turn from backside of lamp and remove the miniature bulb (13466) .

    1. Install new miniature bulb into socket.
    1. Install socket in lamp .
    1. Secure lamp to rear license plate lamp shield with two screws and tighten to 2 Nm (18 lb-in).


      ak1473a.gif


      Item Part Number Description 1 13508 Rear License Plate Lamp Shield 2 14A583 Lamp Lead Wire 3 383356-S Nut (4 Req'd) 4 56000-S Screw (4 Req'd) 5 13550 Lamp (2 Req'd) 6 13466 Miniature Bulb (2 Req'd) A — Tighten to 2 Nm (18 Lb-In)

    Feb 27, 2010 | 1998 Ford Windstar

    1 Answer

    How do I get to the license plate lights to change them?


    Make sure that the new shaft you installed has the ABS gearing on the outter CV joint. If it does, inspect the ABS sensor (mounted on the spindle)for damage or dirtyness...clean or replace the sensor. Hopefully this helps

    Aug 20, 2009 | 1996 Lexus ES 300

    1 Answer

    How do I change the rear license plate light bulbs?


    License Plate Lights Removal & Installation License plate lamp retainer clips
    a555c7b.gif
    To Remove:
    Remove or disconnect the following:
    1. License plate
    2. Pin-type retainers and the luggage compartment lid trim panel
    3. License plate lamp electrical connector
    4. Lamp socket from the license plate lamp
    5. Using a suitable tool, through the access hole, release the clips and remove the license plate lamp
    To Install:
    1. Install or connect the following:
    2. License plate lamp
    3. Lamp socket to the license plate lamp
    4. Electrical connector
    5. Luggage compartment lid trim panel
    6. License plate

    Jun 06, 2009 | 2000 Lincoln LS

    1 Answer

    License plate bulb 99 alero


    remove the 2 license lamp screws from outside,above the lic.plate then from insidethe trunk pull up the lic.lamp housing and replace the bulb.it should pull straight out

    Apr 21, 2009 | Oldsmobile Alero Cars & Trucks

    1 Answer

    License plate light replacement


    The license plate lights are in the ledge above the license plate. 2 screws keep the lens cover in place. Remove the screws, and the cover comes off. Just pull the lamp out (wedge base) and replace.

    Apr 13, 2009 | 2002 Chevrolet TrailBlazer

    1 Answer

    License plate light hookup


    Hi,you should have the original licence plate light wires, if these are a different colour from the ones on the new bumper you will have to splice the originals to the new ones use a test lamp/meter to test for the live feed and connect this to the red wires then connect the black wires and join these either to a good earth point or the other wire which should be ground.

    Feb 01, 2009 | 1990 Toyota Pickup

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    79 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    75117 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...