Question about Isuzu Cars & Trucks
Check the filter in the bottom of the bottle make sure there is a good flow supplying the pump.
Posted on Apr 09, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here is a pic.
1 3A674 Power Steering Pump 2 3A714 Power Steering Pressure Hose 3 3C510 Power Steering Hose Bracket 4 3N824 Power Steering Pressure Switch 5 3504 Steering Gear 6 3A713 Power Steering Return Hose (Gear to Cooler) 7 3D746 Power Steering Fluid Cooler 8 3493 Power Steering Return Hose (Cooler to Pump
Posted on Feb 23, 2009
well i got a salvaged ecm from a junkyard and put it in, still did'nt start. took alternator off to have it checked , it is fine. put it back in and now it starts and runs fine. check the alternator and the connections, i heard the alternator controls power after the initial ecm prime when it is turned on. i have no idea how true it is, but worth a shot. if you can find a cheap ecm for a junkyard (mine was 75 bucks) i would try that afterwords.
Posted on Mar 06, 2009
Remove low pressure and high pressure hoses (this one could be hard to break loose). You might want to have an oil pan handy, to capture the oil. Disconnect electrical sensor. Remove the bolt that holds belt tension adjustment plate. And finally remove the bolt that holds the pump in place. It is bolted from the back and located at the right lower corner of the pump if you are facing the front of the car. Remove the pump assy. I could not remove belt pulley at home, no matter how hard I tried. Ended up taking it to an automotive shop and they removed it in no time, using one of those "pneumatic impact guns". Assemble new pump. Fill the reservoir with PS oil. Make sure both of the front wheels are off the ground, start the engine and slowly spin the steering wheel back and forth for about 5 minutes or untill screeching sound stops and the liquid in the reservoir stops foaming. That will bleed any air that is in the system. Don't go all the way to the end of stroke. Good luck.
Posted on May 09, 2009
Remove belt, fan, fan shroud and fan bracket. Remove timing covers, timing belt and water pump. Replace timing belt and the hydraulic tensioner with new ones. I suggest you get a mechanic to do this as you can easly get it out of time. Not an easy job.
Posted on Jul 03, 2009
Tips for a great answer:
Sep 21, 2014 | 2003 Isuzu Rodeo
Nov 09, 2011 | 1999 Isuzu Rodeo
Nov 24, 2010 | 2001 Isuzu Rodeo
Oct 02, 2009 | Isuzu Rodeo Cars & Trucks
Jul 12, 2009 | 1991 Isuzu Rodeo
May 06, 2009 | 1998 Isuzu Rodeo
Mar 03, 2009 | 1997 Chevrolet Malibu
Nov 18, 2017 | Isuzu Rodeo Cars & Trucks
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: