Question about 1997 Chevrolet Blazer

1 Answer

I have a 97 blazer. My turn signals don't work...not even on the dash...no hazard lights...and brake lights are on without pressing the pedal...what can I do

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 4,977 Answers

This could be the signal switch that has shorted out or damaged. unplug the switch, this is down at the base of the steering colume, check for poor connections. with the switch connected, using a test light turning on the signals check for power at the connector. yellow is left signal, green is right signal. if you don`t have power at this spot the switch is bad.

Posted on Apr 09, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi: I have a 1998 Chevy Blazer 4.3 The brake lights and turn signals don't work.... HELP


Sounds like you have a bad multiple function turn signal switch. A couple things to try With your foot pressing on the brake pedal, Press the four way flasher button up and down, press and hold it down, pull up on it, or wiggle it. If the brake lights come on during any one of those replace the switch. With the key in the run position pull, push, the turn signal lever slightly. If the turn signal or brake lights start to work replace the switch. Let me know if none of those work, they usually do, and I'll get you some more in depth diagnostic info.

Jun 17, 2011 | 1998 Chevrolet Blazer

1 Answer

97 blazer all three brake lights dont work and also the hazard,but the parking lights and turn signals work fine.when you push the pedal you hear a noise down there


Hi, Sounds like you have a short in wiring, also check the brake fuses. Have it checked out by a (qualified mechanic).

Jun 07, 2011 | 1997 Chevrolet Blazer

2 Answers

My blinkers have stopped working and my break lights dont work except for the light over the top of the back end. it works when i press the brake. my regular lights work and my high beams work also.


Fix. Turn signals and hazard are on one switch on the dash. Problem is cold solder joints on small board on the switch. First fix I re soldered loose connection on board, worked for a while. Finally simply changed switch with a new one. Take off dash. About 5 screws, pop out hazard switch replace. Problem solved.

Oct 02, 2010 | 2001 Chevrolet Blazer

1 Answer

Problem with my 97 Chevrolet S10 Blazer


I'd look into the multifunction switch. That controles both hazard and turn.

Dec 12, 2009 | 1997 Chevrolet Blazer

2 Answers

No brake lights, turn signals, or 4-ways.


Did you actually check the bulbs? I believe your brake lights, signal lights, hazards all use the same bulb for each side.

Your brake lights may be your brake switch just above your brake pedal.
The signals could be your electronic flasher module (EFM) located under the dash near the steering column.
Your hazards may be affected by the EFM, but not likely and the switch for your hazards may be faulty

Sep 10, 2009 | 1998 Chevrolet Blazer

1 Answer

97 BLAZER BRAKE AND HAZARD LIGHTS DON'T WORK


did you check the fuses?

If so, then check the plug on the steering column....

Nov 15, 2008 | 1996 Chevrolet Blazer

3 Answers

No turn signals brake lights or hazard on 97 Blazer


did you check the bulbs and the fuses with a test light? If they are ok,try pressing the brake pedal, and wiggeling the 4-way flasher button at the same time....if the brake lights come on, it's in the 4-way flasher switch.

Aug 03, 2008 | 1997 Chevrolet Blazer

Not finding what you are looking for?
1997 Chevrolet Blazer Logo

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...