Question about Cars & Trucks

3 Answers

Drive the car to shopping centre.locked and went inside. Car key fell inside shopping centre. now unlock doors and start acr for about 2 seconds and dies. Immo light flashing.

Thank you. Piet

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cars & Trucks Master
  • 827 Answers

Sounds like you may have damaged the transponder,.

Posted on Apr 09, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 2,039 Answers

Your using the valet key go to your dealership with your serial number they will cut you a key with the right resistor

Posted on Apr 09, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cars & Trucks Master
  • 880 Answers

YOU ARE USING A KEY THAT IS NOT PROGRAMMED.

Posted on Apr 09, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Start Kia sportage with no alarm button


Usually if you use the key in the door lock to lock unlock the door it will disarm the security system on the car, when you unlock the door it has to be the drivers door, lock the door then unlock the door and hold the key in the unlock position for 2 seconds

Dec 09, 2013 | 1998 Kia Sportage

1 Answer

Security system went off after replacing battery now car wont start nor fuel pump will turn on.how do i fix


You might just need to reset it. Roll the drivers window down and close all the doors. Lock all the doors with the key ) turn the key to lock twice, The electric locks should lock all the doors. wail a few minutes and unlock and open the trunk with the key. relock the truck or just close it. unlock the drivers door with the key, twice. all the doors should unlock, get in and start the car. Now this does'nt always work. If it does'nt we'll make the system think it's running. Close and lock all the doors. open the hood and disconnect the battery, one ccable will be fine. wait a few minutes. Reach in though the open window and turn the key all the way on. Don't open the doors, go around and connect the battery hard so it does'nt jump or skip. Reach thought the window and start the car/ once it's running. turn it off remove the key and unlock the door from the inside and open the door ( as if you were inside.) get in and start the car and everything should be back to normal.

Nov 26, 2010 | 1997 Infiniti.5 J30

1 Answer

I locked my door but i left the window open. So I reached into the window and unlocked the doors from the inside. My car alarm went off so then I used the keys to lock and unlock the doors from the...


It's probably an anti theft lockout device that disables the ignition and /or starter. I would say there's no way to reset it without going through a dealer. If you have a key fob that unlocks the doors electronically you might try using that. Or try locking the open door then closing it and unlocking it again then getting in and trying to start it. Try all kinds of combos but I'll tell you...replacing batteries, fuel pumps, things like that will just be a waste of money. Try all those little combinations of locking and unlocking the car, if none work...call an Infiniti dealer. I know it stinks but with a car stolen every few seconds it's really for your protection. Good luck.

Oct 27, 2010 | Infiniti QX4 Cars & Trucks

1 Answer

Key buttons will not operate locking system,i have changed battery but still no good.use master key,gets me into the car but alarm goes off and also when i attempt to drive it.


I have the same problem kinda. Lost my master key and sent my ecu off with a home made 2 button key to program immobiliser. This key works to start the engin and drive but I cannot get the key to program with the alarm and locking system. You can try the following steps as may work for you.

I can get my car into programming mode after step 1 but step 2 does not work for me. The locks do not go off at all, not once or twice. Battery in remote key is fine as LCD lights red.

Can anyone help please?

Toyota celica 2000 - 2005 remote keyless entry programming guide
STEP 1
1. Key out of the ignition. Open the drivers door , all other doors are closed . Driver door is unlocked

2. Perform these steps within 5 seconds
a. Insert the key into the ignition ( do not turn it ) take key out
b. Insert the key into the ignition ( do not turn it ) take key out

3. Perform these steps within 40 seconds
a. Close and then open the drivers door.
b. Close and then open the drivers door.
c. Insert the key into the ignition ( do not turn it ) and pull it out.

4. Perform these steps within 40 seconds
a. Close and then open the drivers door.
b. Close and then open the drivers door.
c. Close drivers door.
d. Insert the key into the ignition and leave it in the ignition.
Turn the ignition to on (as far as you can go without turning the engine over ), then back to off .
e. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.

STEP 2 (Does not work for me)

6. Perform these steps within 40 seconds
a. Press the lock and unlock buttons on the transmitter simultaneously for 2 seconds
b. Immediately after letting go of the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock then unlock once indicating successful programming. If the door locks cycle twice, repeat steps 6a and 6b as the remote was not accepted.

7. Open drivers door

Hope this works for you.
Hayley

Oct 03, 2010 | 2000 Toyota Celica

1 Answer

I have a problem with my central locking on my 2005 focus . the obc tells me my rear passeger door is open and the drivers door . so the car wont lock, the luggae compartment is ok . any help with this...


It's unlikely you can rectify this problem by playing around with the CL system so you will need to take it to the dealer or auto electrician to fix.
In any event you should be able to manually lock all passenger doors on the vehicle from inside the car and the drivers door from outside with the key.

Before you take the car to the auto shop to fix the CL system try this if you have not already.

1. Manually lock - then manually unlock - all doors (except the driver's door) from inside the car and make sure they are fully shut.

2. Then manually lock all doors a 2nd time except the driver's door.

3. Hit the lock button on your car key pad to activate the central locking system. This should lock the drivers door but with the fault it probably won't. Wait a few seconds then hit unlock on your key pad. Wait again and then hit lock once more. If it will not lock all doors you know what to do next.

Dec 01, 2009 | 2005 Ford Focus

2 Answers

2000 Toyota Sienna Minivan car alarm goes off.


1. Start with key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Insert key into ignition (Do not turn) and pull it out.
3. Perform these steps within 40 seconds.
A. Using the power door lock switch on drivers door perform 5 lock/unlock cycles starting
with lock. Use an even pace and try to go about one cycle per second.
(1 cycle = 1 lock and 1 unlock.)
B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
A. Using the power door lock switch on drivers door perform 5 lock/unlock cycles starting
with lock. Use an even pace and try to go about one cycle per second.
(1 cycle = 1 lock and 1 unlock.)
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Turn the ignition to ON (Do NOT Start) then back to OFF.
E. Remove the key from the ignition.

5. Within 3 seconds the power door locks should cycle automatically indicating successful entry
into programming mode. Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remote simultaneously for 1 second.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds the door locks
should cycle once indicating successful programming. If the door locks don't cycle or
cycle twice, repeat steps A and B, your remote has not been accepted.
C. Repeat steps A and B in step 6 for each new transmitter.

7. Close drivers door.

Apr 25, 2009 | Chevrolet Malibu Cars & Trucks

1 Answer

Locking mechanism is broken on driver's door.


If the valet key is not programmed to the Immobilzer system, it should start the car, but it will shut off. This is only if the car has an Immobilizer system. If your locksmith unlocked the car without the door key, then use the key to unlock and disarm the alarm in the door. If you triggered the alarm, the starter will be disabled till a unlock signal from a remote or the door is actually unlocked with a key. If that cannot be done, your only solution right now is to tow it to the dealership and have them make a master key and check the door locks for proper lock/unlock commands so the alarm will arm and disarm correctly.

Apr 25, 2009 | 1998 Audi A6

3 Answers

The Lexus car remote key control model ES300


try this:

1. Start with key out of ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Insert key into the ignition (DO NOT Turn) and Pull key out.
3. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Remove the key from the ignition.

5. Press any button on remote for a minimum of 1 second.
System should now lock and unlock doors once.

6. Close and open drivers door.

7. Press any button on remote for a minimum of 1 second. System should now lock and
unlock doors. Once to confirm programming, twice to indicate programming failed.

8. Repeat steps 5, 6 and 7 for additional remotes.

Mar 23, 2009 | 1997 Lexus ES 300

1 Answer

1995 Volkswagn Jetta door lock fell off and alarm went off, car w


the same thing happened to my 1996 jetta trek.

when the alarm went off on me and the car would not start i walked around to the passenger door, locked and unlocked it, therefore the alarm went off.

but the alarm only went off if the car battery was low and had trouble starting.

Jan 15, 2009 | 1996 Volkswagen Jetta

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...