Question about 2001 Mazda Tribute

1 Answer

Timing belt broke there are no marks on cam gear,s at all how to re align cam gears on tdc

There are slot,s in the back of the cams for a locking tool but how do i know which is tdc

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

The crankshaft pulley keyway is to be set to 11 o'clock for TDC of no. one piston. Follow the diagram on page 2B-9 of the Haynes Manual for the camshaft timing marks!

Posted on Apr 09, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need firing order for a 2004 kia rio and how to align it's gear assembly for a new timing belt? I NEED HELP! !


1342 or 1243 ,not sure about timing marks for belt as my all data doesnt have this information ,remove spark plug no1 cylinder use a long screwdriver to locate TDC then look at valves and no1 cylinder should have cam lobes pointing upwards and outwards one to the left a bit and one to the right a bit ,now look for some timing marks ,could be on the back of the cam a slot that has to level with head housing .some vehicles have white lines on the back of the timing belt ?' renault but look for a slot on the back of the cam thats another favourite

Feb 21, 2016 | Kia Cars & Trucks

1 Answer

How do I reset the timing?


First pull the timing belt tensioner then slip the belt off the cam gears. You then need to find TDC (Top dead center). 3 ways to find TDC 1) There are marks on the crank pulley align them for TDC. 2) Remove timing cover and use crank gear mark seen in link below 3) Put the dip stick in cylinder 1 and turn engine until dip stick stops going up. After finding TDC align cam gear marks seen in link below. Now make sure both cam and crank stay in position and slip timing belt back on (you can move the cam gear to get the belt on but make sure the marks are aligned after the belt is on). Last tighten the belt tensioner, I usually use my finger or an extension to get some more tension on the belt. You might have to remove engine mount bracket makes life much easier as the front cover section is TIGHT !!!. Turn engine a few times to make sure you have compression and engine turns without getting stuck. See link below good luck.

http://bladeagenos21.soup.io/post/374487151/timing-marks-on-mazda-626-1994-diagram

Jul 08, 2014 | 2002 Mazda 626

1 Answer

Do you have a diagram for 2003 saturn timing belt


The 2.2 liter engine uses colored links on the timing chain to align with the marks on the gears. You just have to rotate the engine to where the copper chain link is up on the upper right side of the intake can gear--aligned to the INT diamond on the gear. Then the silver link should be down at about 5 O-Clock on the crankshaft timing mark. The other silver link should then be aligned to the mark on the exhaust cam sprocket. See picture below.

For the 3.0 liter engine, there are marks on the belt that line up with marks on the gears. The book calls out special tools to hold the cam sprockets in alignment while the belt is put on. There is also a special tool to lock the belt onto the crankshaft sprocket. See pictures below.
Please let me know if you have questions.

2.2 liter:

jturcotte_425.gif



jturcotte_426.gif

3.0 liter:
camshaft sprocket alignment with belt marks

jturcotte_427.gif


Camshaft locking tools

jturcotte_428.gif



Crankshaft belt tool

jturcotte_429.gif


Properly adjusted tensioner

jturcotte_430.gif

Dec 08, 2010 | 2003 Saturn VUE

3 Answers

How to set the twin cam ,on a renault megane 1400cc after a snapped cam belt ,i had the head repaired at a shop,have all the timing tools to refit the belt and cam,s , BUT HOW TO FIT THE CAMS IN THE RIGHT...


a renault ,real euro car this one ,no problem here at all ,bring the pistons to TDC the bring back a bit so no piston is at the top ,mark it whilst its at the top with a thin white paint mark on the sprocket ,then back it down a bit .fit head because i sure the head bolts are under the cams ,then fit cams and make sure the inlet and exhaust valves are closed on no1 .no4 should be open with the cam lobes pointing down ,now look for the timing marks,they could be a lug on the cam pointing at something or a slot on the back of the camshaft that has to horizontal with the head ,or even a hole in the front pulley that aligns with a hole indent in the head that has an 8mm bolt push in to hold gear wheel in place -then when you find the marks bring the bottom sprocket back to the mark ,the actual mark is on the flywheel as i remember a special tool with a spring loaded pin to locate flywheel is used ,the fit the belt ,seem to remember a white line here on the belt that aligns with the cams a well ?? look iam old and i forget things ,then make sure you turn engine over twice on bottom pulley with a ratchet to ensure valves clear before starting -

Jan 02, 2010 | 1997 Toyota RAV4

4 Answers

1992 Volvo 960 Broken timing belt - need to locate alignment marks for crankshaft and camshaft and associated reference marks for TDC or other position. Car was cranked AFTER belt broke - Crankshaft Is...


IF U BROKE THIS BELT WHILE DRIVING U HAVE BENT THE VALVES IN THE ENGINE, THIS IS WHAT IS CALLED AN INTERFERENCE DESIGN ENGINE, THAT MEANS WHEN THE TIMING BELT BREAKS THE PISTONS HIT THE ENGINES VALVES

Nov 11, 2009 | 1992 Volvo 960

1 Answer

How to set timming belt,cant find mark for crankshaft 3.0L


Timing belt removed, static timing was not set before removing timing belt.

[Set Static Timing:
No.1 piston is brought up to TDC before removing timing belt.

Cam gear has a punchmark on face of gear, and this mark aligns with one single tooth. There is a matching punchmark on the Timing Belt Rear Upper Cover.

Facing the cam gear, the mark is to the upper right. There is an 'egg shape' of the timing belt upper rear cover, in this spot. This punchmark is in that 'egg shape', and is close to a bolt hole. The cam gear mark lines up with the Timing Belt Rear Upper Cover, mark.

The crankshaft gear has a punchmark on the face. It lines up with one single tooth. There is a corresponding punchmark on the lower right side. An alignment mark)

Should be a round punchmark on the face of the crankshaft gear. It lines up with a single tooth. Wipe the gear clean, use a little carb cleaner. (NO flames, or sparks nearby, well ventilated area)

Barring you cannot find the crankshaft mark, find the camshaft alignment marks, make sure they are aligned with the alignment, (Punchmark), on the Timing Upper Rear Cover.

Count the teeth in the timing belt. There should be 133 teeth on the belt.

There is 43 teeth in-between the timing mark of the camshaft, and the timing mark on the crankshaft.

(43 teeth in-between the Right Side Camshaft mark to crankshaft mark, 43 teeth in-between the Left Side Camshaft mark to crankshaft mark)

There should be 40 teeth in-between the two cam gears.




Oct 24, 2009 | 1989 Nissan Pathfinder

3 Answers

Need timing belt diagram for 93 prelude 2.2 duel overhead cam


I have the diagram you need if you want me to send it to you. Send me your email address and I will send you the pictures and explanations on how to time it. outdoorsman592003@gmail.com

Sep 12, 2009 | 1993 Honda Prelude

1 Answer

99 ford contour 2.0 dohc timing belt replacement... i have the alignment tool and blanking plug but which way are the cams turned to align?


Engine Timing Belt/Chain Illustration
Figure 1
fm1069500554000x.pngBefore installing tool. If the belt broke turn the engine so the #1 piston is half way up. This way you will not bend the valves while turning cams. If you feel that the cams are very hard to turn or stops turning then turn crank by hand to lower piston away from valve. Then turn the cams clockwise or counter clockwise slow one at a time too the proper slot position for the tool to fit. Once the cam marks are lined up bring the #1 piston to its TDC.

Aug 23, 2009 | 1999 Ford Contour

1 Answer

How to align timing sprocks on a 1997 z24 chevrole cavalier


You will need 2 5/16 drill bits. There is a 5/16 hole in each cam gear. With the crankshaft 1/8 turn off TDC, turn the cam gears so the hole is down. Insert the drill bit into the hole and move the gear slow until the bits slides into a hole in the rear timing cover. Do this to both cam pulleys. When you have both bits installed, this will lock the cams. Don't turn the cams with the crank at TDC, It will bend valves. Once you have the cams locked, turn the crank 1/8 of a turn back to TDC. Don't go the other way. The TDC mark on the crank should be a dot on the gear and a arrow on the rear timing cover. Then after everything is lined up, Install the chain,guides and tensioner. After everything is installed, Turn the crank two revolutions, and line the crank back up to TDC. If the timing is right, you should be able to insert the drill bits in each cam gear. Hope this helps.

Mar 11, 2009 | Daewoo Leganza Cars & Trucks

1 Answer

Timing belt diagram for 2001 ford escort zx2 dohc


cam shaft timing marks on back of cams ,two slots ,use a flat piece of metal to align .remove no1 spark plug and drop long thin screwdriver down it to bring piston just below tdc,then align cams so both cams are on the rock (valves closed) with knob on back cam aligning with pick up sensor left side between lobes.then bring piston up to tdc and fit belt.turn engine over twice with socket on bottom pulley to make sure no valves clear pistons.Remember to remove flat edge from back of cams i didnt last time and bent my home made tool

Jan 28, 2009 | 2001 Ford Escort ZX2

Not finding what you are looking for?
2001 Mazda Tribute Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...