Question about 2004 GMC Sierra 2500HD

Open Question

Emergency Brake cable diagram - 2004 GMC Sierra 2500HD

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hand brake doesn't work


The parking/emergency brake is always mechanical no matter what vehicle you have. The cables usually become rusted and no longer move. So, yes, you'll have to replace some if not all the cables. Usually that's enough to fix the problem as the rear brakes hydraulically are probably working fine. (Normal pedal brake use)

Here is a diagram for an 2007, it seems to only have 2 cables. Your lever to the brake cables is probably fine.


Car Parts Diagram

Sep 19, 2016 | 2005 Honda Accord Sedan

1 Answer

How too release the emergency brake foot pedal when the cable is broken?


About 73,400 results (0.87 seconds) Search Results

    Parking brake release cable snaps - Chevy Avalanche Fan Club of ...

    chevyavalanchefanclub.com > ... > Problems: Brakes

    24 posts - ‎16 authors
    Went to release the parking brake on my 04 and the cable snapped. ... More like the end cap coming of the cable that attaches to the foot pedal. ..... Then I released the parking brake, pulled out the broken release cable/handle assembly, ...

    How To Install Repair Replace Parking Brake Release ...

    ? 5:54
    https://www.youtube.com/watch?v=qx0oGfV62NQ
    Jun 23, 2011 - Uploaded by 1A Auto Parts
    How To Install Repair Replace Parking Brake Release CableHandle ... or replace a broken or worn out parking brake release cable handle.

    Emergency Brake Pedal Assembly & Stuck Brake Cable ...

    ? 10:13
    https://www.youtube.com/watch?v=0jYfvthBzhU
    Apr 17, 2014 - Uploaded by corgLLC
    Emergency (Parking) Brake Pedal Assembly & Stuck Emergency (Parking) Rear Brake Cable The emergency ...

    E-Brake Cable Broken? Stuck Emergency Brake... Help Please ' Chevy ...

    www.tahoeyukonforum.com > ... > Engine & Drivetrain


Jan 25, 2016 | Cars & Trucks

1 Answer

Brake realese cable broke from inside vehicle how do i unlock the emergency brakes


You will need to get underneath the vehicle and loosen the emergency brake adjuster to relieve the tension on the cables. Bear in mind that untill you replace the broken cable and readjust the emergency brake, you will have no emergency brakes.

Jun 23, 2011 | 1996 Dodge Caravan

1 Answer

I need a parking brake diagram for a 2007 toyota corolla. I need to replace the emergency brake cable.


unless the cable is siezed their should be no reason to change the cable ,slacken adjuster right off then remove the rear drums and clean the lip on the outside edge with a small angle grinder and adjust brakes up amnually and this will cure your problem ,then adjust handbrake cable up to 3 notches and it will be perfect

May 02, 2011 | Toyota Corolla Cars & Trucks

1 Answer

I need to have my car inspected and the emergency brake is froze up. It doesn't stop the car, I was wondering how to get it to work and I need a diagram of the under body of the car for the emergency brake...


You dont need a diagram, you have the car in front of you. Since you dont say what model, year ect. that you have I dont know what to tell you. You need to find out which parts/ cable is seized and replace them, you can buy some cables aftermarket, but most will be dealer parts.

Aug 30, 2010 | Chevrolet Prizm Cars & Trucks

2 Answers

Emergency brake light stays on the dash. is it a troubleshooting light?


It probably indicates that the cable is not being fully retracted when brake is disengaged. Spray as much of cable as possible with WD-40, allow to sit for a few hours, the engage and disengage the brake several times untill it loosens. If this fails the cable may be stretched and needs to be replaced.

Jun 25, 2010 | 1996 GMC Yukon

1 Answer

Emergency brake stuck, pedal release broken


What happens is the brake cables rust inside the cable sheath and then they won't slide easily. There's no good fix for this other than replacement. It's not easy to even find where they are stuck.It might be possible to find the end of the cables at the back wheels and pull the cables back---to release the tension

Apr 26, 2009 | 1994 Pontiac Grand Prix

2 Answers

Emergency brake


look under the front of the rubber boot that covers the bottom of the park brake handle, u will see a nut on the end of the park brake cable, tighten it until u reach the proper adjustment.

Feb 27, 2009 | 2004 Kia Rio

2 Answers

I pushed my emergency brake down and now i can't get it back up


try putting the car in drive then back in park. should release brake.

Jan 20, 2009 | 1992 Cadillac DeVille

Not finding what you are looking for?
2004 GMC Sierra 2500HD Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...