Question about 1993 Geo Tracker
Posted by Anonymous on
What does pulling mean?
in 2wd and 4wd the rear axle pulls (that i moves the car)
or do you mean the rear brakes drag? (lift car and feel them?)
or while braking the rear brakes, pull.
we cant guess the word pull and its implications, unless you say.
tell what your are doing, when it's pulling?
and what you felt or saw or?
Posted on Apr 12, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i1m sorry to say that wheel bearings are not set to a torque specification, when you have repacked the bearings [ inner and outer ] ,reassembled it ,take the nut up until thewheel starts to drag and not turn very far when you try to spin it spin it backward and forward several times,grab the top of the wheel and try to push it in and out,if you getany movement at all tighten the nut a couple of castilations. do it all over again, spinthe wheel a few times and then try for the crossways movement again, if there is no movement ,you are very close to being right....................now comes the experience bit , iwould take it one more castilation of the nut because i know the feel that is need ed,,without that i suggest you put the pin in where you ereput the cap on and go for a 5 minute drive . whenyou get back ,jack it up and thespinning of the wheel again and try for the top crossways movement ,if there is any tighten thenut 2 castilations, and provided that when you try to spin the wheel by hand with a reasonably strong push the wheel should trael about 6 inches at least after your hand leaves it ,it is now a close as you are going to get itput it all to gether and for the next day or so put yor hand on the grease cap after you have driven anydistance, and you will feel it is warm but you should be able tohold your hand on the grease cap. there you have it ,any questions come back."youdoit"
Posted on Nov 06, 2009
If your lucky the code may have been written down in the manuel book. If it's not written down in the book or it's missing, drive to the chevy dealer that sells Geo trackers and the Service adviser can help you unlock the stereo by getting the information from the Vin number.
Good luck and hope this help. http://www.delcolockcodes.com/
Posted on May 23, 2009
You need to take the cover off your hub and clean and grease the lock ring. It is attached to the spring. It sounds as though your hub is rusted open.
Posted on Mar 09, 2009
SOURCE: 1993 geo tracker fuel injector
ecm does control but is also based on input from the Throttle position senser. unplug the TPS and try again. Also make sure the ECM and engine grounds are good
Posted on Feb 21, 2010
A 1993 Tracker will have OBD1 technology. Just unplug the battery for 5minutes and plug it back in. If the light persists You will have to find out and repair the problem that your cars computer believes it has.
Posted on May 12, 2010
Tips for a great answer:
Aug 24, 2014 | 1993 Geo Tracker
May 24, 2014 | 1993 Geo Tracker
Oct 27, 2013 | 1993 Geo Tracker
Apr 06, 2013 | 1993 Geo Tracker
Aug 17, 2010 | 1993 Geo Tracker
Apr 30, 2010 | 1993 Geo Tracker
Jun 27, 2009 | 1992 Geo Tracker
Feb 02, 2009 | 1993 Nissan Sentra 4 Door
Sep 26, 2008 | 1993 Geo Tracker
Sep 26, 2008 | 1993 Geo Tracker
83 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: