Question about Volkswagen Cars & Trucks

Open Question

Cam Caps Torque

What is the torque settings for the cam caps on a volkswagen citi golf 1.4 i?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 33 Answers

SOURCE: torque settings for mk 2 golf

this might be of some help click me

Posted on Jun 15, 2008

  • 1 Answer

SOURCE: Hi I need torque specs for b5 dohc(cylinder head job)

the pdf manual says it is 10 - 13 ft lbs  from my research it is 75 ft lbs
I hope I am right cus I just set my head at that :( before i got the pdf file!
havent started it yet though

Posted on Mar 13, 2009

  • 42 Answers

SOURCE: hi is there anybody who knows the torque settings

most local libraries has books with the specs in them

Posted on Mar 18, 2009

  • 154 Answers

SOURCE: specs

Well I just looked up the specs for you for the 2.7 ltr. I hope this is what you want.
Cam Caps 105 in.lbs.
Cam Sprocket 250 in.lbs.
Crank Dampener 125 ft.lbs.
Cylinder Head Cover 105 in.lbs.
Here is an illustration of the timing chain set up. Be aware these marks are lined up with the three sets of plated links on the chain. You should easily identify them if you have a new chain. You may have to clean an old chain to see them.
Good luck with this and let me know how it goes for you.
bfc672e.gif

Posted on Apr 06, 2009

stevenhurc
  • 450 Answers

SOURCE: torque specs for big ends, mains, cam caps

found local Adelaide engine reconditioning shop that knows all about g200 twin cam EFI isuzu motors for parts and engine components ( pistons, rings, bearings etc. ) and machining, Chris Milton engine reconditioning. They will do machine work for me so then i can put it together.

Posted on May 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Camshaft torque isuzu 6ve1


wow, no year stated,
the cam has a front drive, bolt torque and cam bearing cap torque.
The 6VE1W 3.5L DOHC 24V V6 was introduced in 1998 with 215 hp (160 kW) and used until 2004 with the termination of the Isuzu Axiom. Gasoline direct injection was added for 2004 only and boasted output to 230 hp (172 kW). This was a stroked version of the 6VD1.

ill answer for 1998, rodeo 3.5L
alldata.com , try reading all the steps, not just torque . RTV steps
and sequence, of cap torque.

answer for caps
  1. Apply RTV gasket material to the mating surfaces of the cam bracket and head. Do not allow the gasket material to protrude.
  2. Install the caps and bolts. Torque the bolts, in sequence order, to 89 inch lbs. (10 Nm).

Apr 11, 2014 | Isuzu Rodeo Cars & Trucks

1 Answer

Torque specifications


Head bolts are torqued in 3 steps, 1-18ft.lbs, 2-60 degrees, 3-60 degrees, camshaft caps-10-11 ftlbs, intake manifold-12-17ftlbs, exh manifolds-32-40 ftlbs, camshaft pulley-74-89 ftlbs.

Feb 05, 2014 | Cars & Trucks

1 Answer

Torque setting for 1972 Cororna


My manual shows an 8RC for 70 and 71 and an 18RC for the 72-74

18RC valve clearance HOT IN .008 EX .014 cold spec. .007 .013
Cyl head 72-82 Ft Lbs
Rocker caps 12-17 ft lbs
cam bearing clearance .001-.002
cam endplay .0017-.0066
oil tube 11-16 Ft Lbs

Jun 15, 2013 | Cars & Trucks

2 Answers

Do I need to torque the cam shafts


If you are asking about the cam shaft bearing caps, the answer is a most definite YES! I can't remember the exact measurement but believe it should be 12nm.. When bolting down the shafts, hand tighten each cap, pulling the shafts down evenly and then when all caps are fully closed use a torque wrench to complete the job. Regards John

Mar 31, 2012 | 1999 BMW 318 ti

1 Answer

I need the cylinderhead torque settings for 2004 1.3 city golf. Please assist


The head torque settings are 75 nm plus a further 90 degrees (102 ft/lbs)

The torquing sequence is:-

9 5 1 3 7
front
10 6 2 4 8

Mar 17, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

2002 escape 3.0 camshaft cap bolt torque specifications


make sure to apply 5w-20 oil to caps prior to install. Also caps and journals are number so you do not install in wrong place. Starting with Righ side looking at pulleys from front, right side cam start with first cap on left being #1 then bolt on other side of cap as #2. Cap behind would be #3 to left then #4 bolt next to it. Keep tightening the next 2 caps behind them in same manner, then jump to front of cam to left side and tighten caps front to back. You should tighten to 10 Nm (89 lbs-in) with a torque wrench. Then you tighten left side head cam caps starting with the left side if looking at front pulleys. Start at front caps working to rear then jump to right side cam front to back. Tighten these caps at 8 nm (71 lb-in) using torque wrench. Also make sure if heads are bolted to block that cam pulley postion is the following: left side looking at pulleys------left pulley mark at 12 o'clock right pulley mark at 3 o'clock. Right side head looking at pulleys------- left side pulley at 9 o'clock and right side pulley at 12 o'clock. When I say clock postion that means using head where valve covers meet as your straight vertical postion.

May 05, 2010 | 2002 Ford Escape

1 Answer

Hello. Could you please advise me what the camshaft torque tightening specs are for a 1993 SEAT IBIZA . Thank you


CAM SHAFT BEARING CAPS 15 FT LBS. DRIVE SPROCKET BOLT 58 FT LBS. CAMSHAFT END PLAY IS 0.006 in. WARNING THIS IS THE 2.8L ENGINE WHEN TORQUEING CAM SHAFT BEARING CAPS YOU HAVE TO TIGHTEN THE BOLTS 2 TURNS AT A TIME IN A DIAGONAL PATTERN TO DRAW THE CAMSHAFT DOWN AGAINST THE VALVE SPRING.

Sep 29, 2009 | 2002 Volkswagen Golf

2 Answers

Hyundai elantra 1.6GLS J2 torque settings


dear friend:here follows the settings in need:
cylinder head-30-35 nm + 30-35 + 65deg + 65deg.
mains-30nm +65deg
big ends- 1 - 26nm 2 - 52NM
fly-wheel -130nm
cam-sprocket - 100-120
crank-pulley - 170-180
cam caps -15nm

Aug 31, 2009 | 1995 Hyundai Elantra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...