Question about Cars & Trucks

1 Answer

Am I missing fuses? My reverse/backup lights don't work so I thought I'd check the fuses and this is what I found.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cars & Trucks Master
  • 880 Answers

OFTEN THERE ARE OPEN SLOTS FOR FUSES THAT WOULD POWER A DIFFERENT VERSION OF YOUR CAR. THESE JUNCTION BOXES ARE USED IN MANY DIFFERENT MAKES AND MODELS AND DIFFERING OPTIONS. THE SCHEMATIC EMBOSSED INTO THE COVER WILL BE YOUR GUIDE

Posted on Apr 09, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: When I shift to Reverse my reverse lights wont work.

Buy a auto repair manual for your respective truck, or go to the Nissan dealer and ask a tech to show you where the actuator switch is located, and replace that switch. That is the only thing left to replace. That should fix it. Also you could use an Ohm meter to check the switch to see if it is bad. Also check for a broken wire when you remove the actuator switch.
Good Luck!

Posted on Dec 16, 2008

Alcatrazx
  • 65 Answers

SOURCE: Volvo 240 reverse lights don't work

Hi Sir

Checked the switch and plug? here's how :)

Yes it is the reverse light switch which is hooked up to your gearbox which needs to be replaced. Also it could be the plug going into this switch is a bit dirty or thorn (due to engine temperature and time wear) which in that case means that it needs to be fixed before replacing the switch.

Checking its actually the swtich so you don't buy it for nothing :)

Just to make sure that the circuitry is ok. Go to the gearbox (if it is front wheel drive transverse engine you wont need to go underneath) check where the gearbox and linkages are close to the revers there should be a switch n plug hooked up to it. Unplug it put in a piece of wire to short circuit both wires. Then turn the ignnition key on and if your circuitry is fine the lights should go on :) This means that its the switch for sure :) I hope that this helped your problem :)

CHEERS

Posted on Jan 07, 2009

chuck943
  • 783 Answers

SOURCE: Rear backup lights & reverse sensors don't work.

Go to this site and pick owner guide in left task bar then pick your vehicle information and down load the owners guide and it will have the fuse panel layout on page 191-193

http://www.genuineservice.com/genuineservice/en/default?page=genuineService

If the site doesn't work,sometimes it puts fixya's site in front of it just copy and paste it in your task bar.

Posted on Mar 04, 2009

  • 753 Answers

SOURCE: The backup lights on our 1996 Jeep Cherokee

Check your backup light circuit at the trans.If this is a manual trans it will be a seperate switch if automatic it should be in with the neutral saftey switch.Sometimes on a automatic the switch is adjustable and may just out of adjustment.Check engine light have it scanned and turn off light by clearing code at your local Autozone or pepboys

Posted on Aug 22, 2009

  • 1986 Answers

SOURCE: New rear backup bulbs but they still don't work.

On the side of your transmission will be a switch with several wires coming out of it. This is your reverse switch that turns on your reverse lights and most likely needs to be replaced

Posted on Oct 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Were are the back up light fuses on 09 nissan titan


Check this search link to find the fuse for your vehicle:

Were are the back up light fuses on 09 nissan titan Google Search

Also, check that the relay is not missing or that contacts are not corroded. Could be a number of things wrong, so check this forum link for answers:

Backup Reverse lights not working checked fuses Nissan Titan Forum

Feb 12, 2015 | Nissan Cars & Trucks

1 Answer

Backup lights don't work on my 1997 Ford Ranger


Have you checked the reverse switch on the transmission? Fuse in the fuse box?

Dec 29, 2012 | Cars & Trucks

1 Answer

2004 Ford Escape BACKUP LIGHTS both are completely not working. We have new bulbs and the fuse is new what could be the problem for the lights not working?


My guess would be the neutral safety switch on the transmission.
The switch also acts as a backup light switch when the shifter is in reverse.
I would check for power at the switch for the reverse light circuit.

Oct 01, 2012 | 2004 Ford Escape

1 Answer

1996 Camry reverse lights don't work


Check if you are getting power to the reverse light switch. Turn ignition on, disconect terminals to the switch and check for power on the positive terminal using a light bulb or a test meter whatever. If power is there jumpthe 2 terminals and check if light backup light works. If it does replace switch. If ther is no power at switch check wiring from fuse box. If light does not work when switch is jumped check wiring to back.

Sep 11, 2012 | 1996 Toyota Camry

1 Answer

I can't find the fuse for the Reversing Lights (Backup Lights)


http://www.ehow.com/how_6016968_fix-2006-dodge-grand-caravan.html
Hi try this link the 2003-2006 are almost the same and the above link should help you to find the fuse. After you replace the fuse if it still does not work call your local dealer to find out if it could be a reverse sensor or reverse switch. Good Luck and don't forget to let everyone on fix ya know if this worked.

Oct 19, 2011 | 2003 Chrysler Voyager

1 Answer

My backup lights will not come on when in reverse; bulbs are good and fuse is not blown; where is the switch for the reverse/backup lights???


the reverse back up lights usually light up when the car is in reverse gear.., however get the wiring checked as you already have checked the fuse and bulbs.

Mar 03, 2010 | 1994 Mercedes-Benz C-Class

2 Answers

Reverse light not working


There is a sensor that connects to the light shifter which tells the car when it is in reverse. It may need to be replaced. You can remove it and check it with an ohmmeter or voltmeter to see if it is good or not.

May 05, 2009 | 2004 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...