Question about Honda Cars & Trucks
Could be a loose connection somewhere or a loose fuse, suggest you check for both first
Posted on Apr 09, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
easy cheesy! Ive changed mine twice. The headlights are small bulbs. Make sure you get the right one (hi-beam vs low-beam). Unplug connector at back of bulb / headlamp unit, remove rubber weather seal (pops right ot). The bulb is held in with a small wire clip that is hard to get back on but can be done. Its spring loaded. Drop wire clip, turn bulb assya 1/4 turn, and it comes right out. Remove bulb from holder and replace. Reverse steps and VOILA!
Posted on Jan 01, 2009
SOURCE: 2005 honda crv what fuse
Generally listed as parking lights. If you have a 12v tester, you can probe thru your fuse box and look for the one that lights the tester when the lights are on and of coarse off when the lights are off
Posted on Jan 04, 2009
SOURCE: honda crv engine light
I would go to your local Honda dealership and tell them the engine light came on. They will hook it up to a special computer and they will be able to tell you why the engine light came on and what's wrong with the car. Not sure what the cost will be to get it checked out. If you don't have the money for that right now.
Posted on Jan 23, 2009
Without seeing it, I would guess that you have a problem with clean contacts. Especially in cars with smokers, the contacts of something like a fuse or a light bulb can become corroded just enough to stop the light from working. Wiggling it scrapes away the debris and allows for contact. I suggest that you take some steel wool and lightly scrub the contact points on both the light and the fixture. **Be sure to have all the doors closed so you dont short out the steel wool.** If you are concerned with the abrasive nature of the steel wool, a pencil eraser will sometimes work just as well. Either way, it just sounds dirty which is par for any car. Good luck!
Posted on Feb 27, 2009
Tips for a great answer:
Sep 11, 2016 | 2005 Honda CR-V
May 22, 2016 | 2003 Honda CR-V
Mar 03, 2015 | 2005 Honda CRV 2.2
Mar 22, 2014 | 2012 Honda CR-V LX 4dr SUV 2.4L 4-cyl....
Oct 11, 2013 | 2005 Honda Accord 2.0
Mar 02, 2011 | 2005 Honda CR-V
May 20, 2010 | 2003 Honda CR-V
24 people viewed this question
Usually answered in minutes!