Question about 2010 Ford Taurus

1 Answer

2010 Ford Taurus left rear brake light stopped working but bulbs are good and everything else works . Right side is good, what could be problem?

Posted by Anonymous on

  • Anonymous Apr 09, 2015

    I'll try replacing bulb harness , stay tuned thanks!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 22,095 Answers

Wiring or the bulb holder

Posted on Apr 09, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Chev Cavalier 2003 only one rear turn/brake/hazard light

I have a 2002 Chev Cavalier that had the same exact problem. I replaced the bulb harness (purchased from a chevy dealership for around $5) which was fairly easy to do. I have had zero problems with it since.

Posted on Dec 03, 2008

  • 4 Answers

SOURCE: 99 Chevy Tahoe... Rear turn signals, brake lights, and hazards

I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Posted on Oct 11, 2009

  • 2 Answers

SOURCE: Brake light, Turn signal not working rear right 06' Focus

I have a 2000 ford focus no brake lights. with the brake lights the transmission would not go into drive .replaced the brake light switch checked fuse replaced turn signal switch with no results then i moved onto the wiper switch and replaced it as much to my supp rise it fixed the problems

Posted on Aug 06, 2009

csmock132
  • 4669 Answers

SOURCE: Emergency Flashers totally out, Rear lights malfunctioning

Check the ground on the passenger side rear lights, it's likely bad. As for the hazards, sounds like a bad flasher or fuse.

Posted on Sep 03, 2009

  • 4088 Answers

SOURCE: 2000 Ford Expedition-Left turn signal and brake

You may have some wiring 'grounding' problems in the areas of concern. Remove each connection, and clean any rust. Place a light film of grease and a fresh star washer next to ground point, then the wire connector and other washers. Tighten firmly. Check the lamp sockets for any corrosion and replace same if found. The front lamp flashes rapidly because the rear light not working causes the flasher unit to switch faster.

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

All signals and other flashers work but passenger front flashers do not work


Use a test light, test for power and ground at the bulb contacts. Then test for power and ground at the wires. Probably needs a new socket, common problem.

Oct 27, 2015 | 1995 Ford Taurus

2 Answers

My brake lights and turn signals dont work


Stop in at an Advance Auto Parts place and get new fuses. That's all that's needed.

Jul 18, 2014 | 2001 Ford Expedition

5 Answers

2000 taurus left turn signal flashes rapidly and the left rear turn signal lamp does not work. Does ford have burned out bulb sense circuit that would give this indication? The right side flashes normally.


Yes - the fast flashing is a warning that a bulb is burned out. Change the bulb (be careful to put it in the same as the old one as it probably is 2 bulbs in one , parking and turn/stop) and you should be fine.

Jul 08, 2011 | 2000 Ford Taurus

1 Answer

Brake light, reverse light and turn signal issues


Hello. The symptoms you are describing are likely due to a poor ground. Temporarily install a new ground wire by securing a piece of copper wire to the frame with a self tapping screw. Use this ground wire along with the hot wire to see if each of these lights works. If it does, trace the ground wire back to the frame, unscrew it and clean up the metal with emery cloth so you reestablish a good ground.

Jan 28, 2010 | 2003 Ford Windstar

1 Answer

2000 Ford Expedition-Left turn signal and brake light in rear does not work, and left front flasher works but flashes quickly. The front and rear right side of turn signal and brake works perfectly. I...


You may have some wiring 'grounding' problems in the areas of concern. Remove each connection, and clean any rust. Place a light film of grease and a fresh star washer next to ground point, then the wire connector and other washers. Tighten firmly. Check the lamp sockets for any corrosion and replace same if found. The front lamp flashes rapidly because the rear light not working causes the flasher unit to switch faster.

Oct 13, 2009 | 2000 Ford Expedition

1 Answer

Brake light/turn signal no not work on left side only.


check fuse number 7 in Engine Compartment Fuse Box , if its ok you need change turn signal switch

Mar 15, 2009 | 1996 Ford F150 Regular Cab

2 Answers

2001 Explorer Sport ,Rear Driver Brake Light and Turn Sig. Broke


Rear lights are double filament bulbs one side for the lights other side for the brake/turn signals so it still may be a bulb. Do u have a test light or volt meter you can check to make sure u have power there when brakes or turn signals are activated. Or just try another bulb.

Feb 12, 2009 | 2001 Ford Explorer Sport

1 Answer

Ford Taurus 1999 brake lights don't work


might be both buls are bad now, replaced it with new ones
and make sure they are the same part number, you might accidentally install a bulb not desing for brakes,

Aug 02, 2008 | 1999 Ford Taurus

Not finding what you are looking for?
2010 Ford Taurus Logo

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...