Question about Subaru Legacy

1 Answer

Running lights will not turn off.

Checked all switches and key less entry and still on. disconnected and reconnected battery and still on

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Subaru Expert
  • 244 Answers

If you look on top of the steering column, you will see a rocker type switch. If you see orange color on the switch, that means it's activated. If you flip the switch the park/running lights will turn off. This feature is there to allow you to turn on the park/running lights even with the key off.

Posted on May 10, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 2003 Caravan No Crank, 3.3L

This is a bad PCM. Try to disconnect the security system first and if it still does not start then it is the PCM.

Posted on Aug 11, 2008

SOURCE: HOnda Accord EX 1998 ALARM

Have you tried putting your Valet (original keys) into the ignition and turning it to the II position?

Posted on Aug 25, 2008

emissionwiz
  • 75822 Answers

SOURCE: Anti-theft has engaged

sounds like the transmitter in the key head is defective or it lost programming, try these programing steps, if that doesn't do it u need another key made.

Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door
locks will cycle to confirm programming mode.
2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm
programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to
confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Posted on Apr 19, 2009

  • 279 Answers

SOURCE: 88 cadillac deville, ac blower fan wont shut off,

Ralph,
Most common cause of this is the blower fan (proper name for the fan you refer to) continuing to run is a shorted out Electronic Climate Control Module. This solid state device replaces the older style fan speed resistor block (at about 4 times the price) This unit is found on the top of the HVAC box under the hood. (HVAC means heating, ventilation and air conditioning) The HVAC box is found on the passenger side of the firewall. Look behind the A/C's accumulator. It will have an electrical wiring plug on top of it. It will be fastened to the HVAC box with a few 7mm hex head screws. Very easy to change.
FYI, do yourself a favor and replace the blower fan motor at the same time. The Electronic Climate Control Module usually fails because the motor is drawing to many amps of current. This is because it's bushings are worn out or the brushes are worn out.
This is very common on Cadillacs and Buicks.
Charlie
PS Not sure why car won't start. Either you drained the battery or blew a fuse which controls starting the engine. Need more info regarding the "no start" condition.

Posted on Jun 14, 2009

  • 95 Answers

SOURCE: programming key less entry unit

If you have the owners manual it should be in there. My 2003 Mercury Sable manual tells me how to set one up.

Posted on Jul 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Every time I start the van the gauges go all the way to the right and then back to normal. Like the battery has been disconnected.


Check for play in the ignition switch when turning back & forth you may have a switch problem

Nov 14, 2015 | 2005 Dodge Caravan

1 Answer

Engine light on hard start after refuelling 2007 caddy dts


Try resetting the check engine light by disconnecting the battery for a few minutes (While the battery is disconnected turn your key on and off a few times and run through some switches on the dashboard to drain out any remaining power that might still be in the system). If your vehicle is equipped with a backup power source for memory purposes it could take a bit longer. Reconnect your battery and everything should be reset as far as warning lights. If the check engine light comes back on i would say you have an unrelated issue.

Mar 01, 2014 | 2003 Pontiac Sunfire

1 Answer

Trying to reprrogam my key less entry 2001 chevy tahoe all the steps work but then remote still dosent


try replacing the batteries in the remote. You may have to get a new remote. Also try disconnecting the battery to the vehicle. Let sit for 10 minutes and then reconnect battery. Try remote then.

Jan 25, 2013 | 2001 Chevrolet Tahoe

1 Answer

Car won't start.Theft light blinks,clicking sound under hood and thumping like horn wants to go off.Seems like it's stuck in anti theft mode


anti theft light should blink every few seconds.

try disconnecting the battery for 15 minutes.

Anti-Theft-Perimeter The perimeter anti-theft system consists of the following components:
  • anti-theft indicator (THEFT)
  • remote anti-theft personality (RAP) module
  • hood switch
  • keyless entry remote transmitter
  • deck lid ajar switch
NOTE: The remote entry features will not function when the ignition switch is in the RUN or ACC position.
Up to four keyless entry remote transmitters (15K601) can be programmed at one time.
The keyless entry remote transmitters :
  • Are programmable.
  • Must be set at the same time.
  • House four buttons.
  • House three buttons (Mexico Anti-Theft System only).
Programming
Refer to Section 501-14B.
Inputs and Outputs
The remote anti-theft personality (RAP) module receives input from the following components for anti-theft operation:
  • Hood switch.
  • Deck lid ajar switch.
  • Keyless entry remote transmitter.
  • Power door lock switches (LH and RH).
  • Door courtesy input.
The RAP module distributes output to the following for the anti-theft system:
  • Power door unlock relay.
  • Power door lock relay.
  • Liftgate unlock relay (Wagon)
  • Park lamps relay.
  • HORN relay.
  • Dome lamp.
  • THEFT indicator.
  • Deck lid release.
Arming
The anti-theft system can be armed if:
  • The ignition switch is in the OFF position.
  • The panic alarm is off.
  • All doors are closed.
NOTE: If a door is open, the anti-theft system is prearmed and waiting for all the doors to be closed. The THEFT indicator will remain illuminated for up to 30 minutes waiting for all the doors to be closed. If a door remains open after 30 minutes, the THEFT indicator will turn off and the system will return to a disarmed state. After all doors are closed and the 30 second prearm (continuous THEFT indicator illumination) is complete, the system is armed.
NOTE: If the theft LED does not flash after 30 seconds, check the LED FLASH PID to see if the feature is enabled.
The anti-theft system will be armed when the lock button on the keyless entry remote transmitter is pressed, all doors are closed and 30 seconds have elapsed.
When the system is armed, the THEFT indicator will flash quickly until the system is triggered or disarmed.
Disarming
NOTE: Using a key in a door lock cylinder to unlock is not a valid method of disarming the anti-theft system.
Untriggered System
NOTE: If the driver arms the system and remains in the vehicle, an untriggered system can be disarmed by turning the ignition switch to the ON position.
An untriggered alarm system can be disarmed by pressing the unlock button on the keyless entry remote transmitter.
Triggered System
NOTE: If the hood or trunk are open when the system is armed, it must be closed and opened again before it can trigger an alarm.
An armed anti-theft system can be triggered by the following conditions:
The deck lid door, liftgate, hood or any door is opened using a key, inside door handle, hood release, etc.
  • The keyless entry remote transmitter can activate a panic alarm which is similar to the anti-theft alarm, but does not cause the THEFT indicator to flash.
A triggered alarm system can be disarmed by:
  • Pressing the unlock or panic button on the keyless entry remote transmitter.
  • Turning the ignition switch to the ON position.
Alarm State When Battery Power Is Cycled
When the RAP module is supplied power the first time at the vehicle assembly plant, the system will be in the disarmed state. The RAP module will remember whether it is armed, disarmed or triggered in its non-volatile memory. When the battery positive cable is removed and then reconnected, the system will return to the state it was in just before the battery was disconnected. If the system is in any prearm state, then the system will return to a disarmed state when the battery is disconnected and then reconnected.

Nov 06, 2010 | 1999 Mercury Tracer

2 Answers

Security light flash no security system on truck


sometimes turning the ignition on 3 times quickly without starting will reset the computer. If the van has power locks and keyless entry then try using only the keyless entry. Sometimes your car wont have a alarm but an anti theft device which will not allow it to start if it goes off or something triggers it.

Jul 26, 2009 | 2003 Dodge Ram Maxi

2 Answers

Need to reset the key fob


Sit in the driver's seat
Close all vehicle doors; ignition key should NOT be in the ignition, and ignition should be OFF.
Press and hold UNLOCK on your driver's door lock switch, insert and remove your ignition key TWICE, and insert the key in the ignition; this time LEAVE IT. DO NOT TURN THE KEY!!
LET GO OF THE DOOR SWITCH; listen for 3 dings after which, with the key still in the ignition, you will press and hold both LOCK and UNLOCK AT THE SAME TIME on your transmitter for 12 seconds. or until you hear 2 DINGS which indicate a newly programmed transmitter.

If you wish to use more the one transmitter (4 MAX), press and hold lock and unlock just as the first transmitter.

PULLING OUT THE IGNITION KEY ends this procedure :-) !

May 01, 2009 | 1998 Buick Century

1 Answer

Reconnect the Battrey was discounected for a months


It sounds like you have an aftermarket alarm system, if it's not factory. First check your key rings, did the vehicle come with a remote entry/alarm? If it did and just stopped working, check the battery and replace it. If there is no remote, there may be a small toggle like switch under the driver's side dash pannel, someware lower tord the petals. if not, try leaving the key in the ignition in the "on" position with the door open before you try reconnecting the battery. Try that, and if that doesn't work still, disconnect the wires (black and red usualy) to the alarm horn, where all the noise is coming from. Good luck!

Dec 14, 2008 | 2001 Isuzu Trooper

1 Answer

Set the keyless entry


TS06 DEC 05 Keyless Entry - Transmitter(s) Inoperative

There was a recall in DEC. 05 for this particular vehicles remote transmitter system....though im not sure if they would do service free of charge now...

Moving along...if you have no working transmitter, you have to do the following to get it working again:

* Ensure vehicle audio PIN number is known or audio PIN security system is deactivated prior to battery disconnection.
* Ensure a door is open
* Disconnect the negative battery cable, wait minimum 5 seconds then reconnect
* Within 20 seconds of reconnecting the battery cable, insert the keyin ignition then cycle the ignition key from the "ACC" position to the"ON" position 20 times, leaving the key in the "OFF" position after thetwentieth turn.
* the vehicle's indicators will flash 20 times to indicate successfulentry. NOTE: Should the indicators fail to flash, wait 5 seconds thenquickly turn the ignition switch from the "ACC" to "ON" position 10times, leave the ignition "OFF" after the 10th turn and wait 15 secondsthen recycle the ignition switch 20 times.
* the vehicle's indicators will flash 20 times to indicate successful entry.
* within 10 seconds of the indicators having ceased flashing, press the button once on each transmitter.
* turn the ignition key to the "ON" position to lock in and exit from the programming mode.

And if you have even 1 transmitter that does work, its not nearly as difficult:

* ensure a door is open
* remove key from ignition
* lock the doors using the transmitter
* unlock the doors using the transmitter

Within 20 seconds of unlocking, insert key in ignition, turn theignition key from the "ACC" position to the "ON" position 20 times,leaving the key in the "OFF" position after the twentieth turn.

The vehicle's indicators will flash 20 times to indicate successful entry.

Within 10 seconds of the indicators having ceased flashing, press thebutton once on each transmitter. Once finished, turn the ignition keyto the "ON" position to lock in and exit from the programming mode.

Hope this helped,
Jem

Nov 12, 2008 | 2004 Suzuki Verona

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...