Question about 2001 Ford Windstar LX

1 Answer

What is the nut size on the end of the front xle and socket size

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 42,042 Answers

Measure across the flats of the nut and that will be the nut size
so if the dimension is say 1 inch then the nut will be 1 inch and the socket will be 1 inch or 25 mm
most wheel nuts will be 6 sided so although a multi sided socket (12 points) will fit a six sided socket is better it the nut is tightened to high tension

Posted on Apr 09, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size socket do i need for the drive axle/hub nut for a 1997 Chevrolet Cavalier?


I think that one is a 32mm...could b wrong tho..
I'd grab my 32 and 36 if I were going to take it off without looking

Sep 02, 2014 | 1997 Chevrolet Cavalier

1 Answer

Socket sizes for the front spindle nut,lower ball,joints outer tie rods 2014 Honda accord V6 touring


it depends on if they have been changed before. normal size is 18mm changed is 19mm on tie rods. also check the condition of the anti-roll bar rubbers as they can cause this problem to. also check the traling arm on the steering this can do this to.

Feb 12, 2014 | Honda Accord Cars & Trucks

1 Answer

On a 1989 cadillac sedan deville what size is the socket to take the axle nut and what is the lenght of the socket


85-91 is 36mm for front axle nut. its just a standard axle nut socket. good-day! but the auto parts store will tell you the size if you buy one there.

Jan 13, 2012 | 1989 Cadillac Sedan DeVille

1 Answer

Need to know the size of the socket needed to remove the front hubs on a dodge ram 3500 1 ton 4 x 4 with cummins engine?


Removing Tie Rod End Attaching Nut Nut is to be removed from tie rod end using the following procedure, hold tie rod end stud with a 11/32 socket while loosening and removing nut with wrench Removing Tie Rod End Attaching Nut
Remove the tie rod end from steering knuckle arm, using Remover, Special Tool MB-991113 Tie Rod End Removal From Steering Knuckle .
Remove the upper ball joint stud from the steering knuckle using Puller, Special Tool, C3894-A Ball Joint Stud .----------------------- The procedure is :-- Do NOT pound on the outside of the hub. First you will need a 5 inch long half inch drive socket extension. Start the 4 hub bolts about half way, then witha helper hold the extension between one of the 4 bolts and the axle housing then have the helper turn the steering wheel to push on the bolt and hub. If it is really rusted in you might have to start the truck to get more pressure on it while turning. Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Jul 11, 2010 | 1997 Pontiac Grand Am

1 Answer

Wheel nut remover. what does it look like


If you are refering to a Standard Tool to REMOVE the NUTS that Hold the Wheel On it is Simply a 3/4 Inch or a 19 Millimeter Socket that you would Find in Any 1/2 DRIVE SOCKET SEt that Has BOTH METRIC and STANDARD TYPE SIZE INCRAMENTED Sockets.
Now the One that Would Come With the VEHICLE Can be of a FEW DIFFERENT Configurations such as A Standard & MOST COMMON TIRE IRON Witch Looks Like A Disfigured "L" Shape One end with a NUT Receaver Socket on one end and A Large FLATHEAD Screwdriver, . The Next Most Common one Would have the SHORT END that PIVOTS. And Basiclt these are the ONLY 2 Types that You Would Find in your tunk Compartment. This Should Answer your Question.
MY RECOMENDATION is >> AT YOUR LOCAL AUTO PARTS STORE YOU CAN PURCHASE WHAT IS CALLED 1 A "STAR" LUG NUT REMOVER , OR MORE COMMONLY REFERED TO AS A 4 WAY. THIS TOOL looks LIKE A STRAIGHT NORTH SOUTH EAST WEST CROSS BAR WITH DIFFERENT SIZE LUG SOCKET ON EACH END, This Tool Gives Much Better CONTROL and LEVERAGE for Loosening and Tightening the Wheel Nuts.

May 12, 2010 | 2001 Ford Focus

Not finding what you are looking for?
2001 Ford Windstar LX Logo

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...