Question about 2002 Buick Rendezvous
I would like to fix this because I usually use a cassette adapter or just put in cd's. I don't know how to fix it or even if i can so I just want to fix it.
Yes it is possible to put a single din radio in this car. Simplest way is to go on Ebay and order a single din radio fill-in kit and a factory radio wiring plug adaptor for the vehicle. Make sure you order it for the exact year make and model to be sure you have the right installation setup.
Posted on Apr 09, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Our 2002 did the same thing. Easy cheap fix! Pull the wheel off and check the wiring that goes to the wheel sensor. You will find after removing a few inches of wrap, a broken wire or two. This could be on either wheel, so check both. Fix the wires back up and you are good to go. Hope this helps!
Posted on Aug 01, 2008
Turns out this is a common problem for the Rendezvous.
I took it to a mechanic and after he tested to see if all the speed sensors were working with his handheld computer reader, (because there is no speedometer cable anymore) He reset the needle by turning the key about 25 times as far as possible without starting the vehicle. The speedometer needle came back a bit each key turn till it reached zero. It's been working fine since.
Posted on Dec 11, 2009
I just got a tape unstuck myself. Everytime I would hit eject it would make a clicking noise.
Here is what I did:
First I watched these videos to remove the radio.
Then I unscrewed the bottom panel of the radio.
Unscrew the brass screws holding in the cassette player portion of the radio.
Now flip the cassette player over to see your tape, etc.
When I pressed the eject button, I noticed a little motor with a worm gear would move a a gear which moved several other gears until it eventually moved a black gear which has a little post that moves the metal arm which moves back when pushing in a tape and moves forward when ejecting a tape. But I would get a clicking sound which seemed to be due to one gear trying to move a stuck gear.
I forgot the exact details of how I managed to get the tape out, but when I did get it out I noticed when I turned on the radio, it would act like it was trying to play a tape. But when it found out it couldn't, it would try to eject but would fail once again with the gear clicking sound.
I think I tried moving the black post on the black gear that moves the arm that pushes the tape out. Eventually I got to the point where the arm was pushed forward like it should be when a tape is ejected. At that point I was able to insert and eject a tape without any problems.
Posted on Sep 04, 2010
Sounds definitly like a fuse or a relay. If you have owners Manuel it will point out which fuse/ relay to replace. Remember, if a fuse blows there's a reason for it that needs to be remedied
Posted on Oct 02, 2010
Tips for a great answer:
May 15, 2016 | Buick Cars & Trucks
Sep 29, 2015 | 2002 Buick Rendezvous
Dec 07, 2013 | 2006 Buick Rendezvous
Dec 01, 2010 | 2002 Buick Rendezvous
Nov 11, 2009 | Buick Rendezvous Cars & Trucks
Oct 10, 2009 | Volkswagen Passat Cars & Trucks
Jan 27, 2009 | 2001 Ford Expedition
Oct 28, 2008 | 1992 Volkswagen Golf
152 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: