Question about Cars & Trucks

1 Answer

When I am stopped I get a noise from my 5 spd manual until I push in the clutch and the noise goes away.

What could be the cause and thanks for the help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 40,670 Answers

The noise when in neutral is a bearing noise
it can be from a failing throw out bearing that is rattling until you put pressure on it ( will have to be replaced eventually) or an input shaft into the gear box which will have to be replaced sooner rather than later
IF it is hydraulic system with the engine idling see if you can manually pull the release lever away from the throw out bearing ( pushing the clutch slave piston back into the cylinder. If the noise stops it will be a throw out bearing
unfortunately if the slave cylinder is a concentric type (inside the bell housing )and not external you will not be able to test it

Posted on Apr 09, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ford ranger 4x4 5 spd. has started howling when I'm going down the road and it only stops when I either push in on the clutch or put it in neutral.


What speeds, does it make more noise in 4 wheel drive or the same. There are several possibilities, need more information. Does it howl in all the gears or in 5th gear only.

Oct 01, 2015 | Ford Cars & Trucks

1 Answer

Metal on metal noise


hi,

most likely the throw out bearing is at fault. when you push the clutch a spinning bearing pushes the clutch plate away from the flywheel disengaging trans so you can switch gears. the transmission has to come away from the engine to fix it.

jm

Jul 04, 2017 | Toyota Corolla Cars & Trucks

2 Answers

Can't find reverse on my 91 Volvo 240. 5 spd manual transmission. Something is up with the detent collar or cable ...i think?


There are screws around the rubber boot. You can remove them and pull the boot up from beneath the carpet and see what is up. The detent collar is a pretty simple mechanism. There is a plastic stop that the shifter hits, and goes past when you pull up the collar. That plastic stop may need to be loosened and re-adjusted, or perhaps there is some foreign object in there that is keeping the shifter from moving to the end of its throw when you pull the collar.

Feb 27, 2011 | 1991 Volvo 240

1 Answer

I just replaced the clutch on my 5 spd manual trans it now makes noise in the first three gears and goes away in 4th & 5th the trans shifts fine it also seems to be losing fluid but we can't find out...


Common sense here

The clutch is not the issue,if the R&R was done correctly

You have a trans or transaxle problem (internal)

You also have a possible leak

Having owned a trans repair shop in the past,
I suggest you remove the trans,strip it clean,all the
way.

Then diagnose the shifting isssue in 1 thru 3 and the
area of the leak, as you reassemble it, verses all the worry and quessing
of what if's

Feb 02, 2011 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

Difficulty shifting 2000 Ford Explorer 5 spd. manual transmission


have you checked to make sure your clutch fluid is topped up? low hydrolic fluid can sometimes cause this.

Apr 03, 2009 | 2000 Ford Explorer

1 Answer

Transmission noise - 93 Honda del Sol w/ 5-spd manual trans.


Imput shaft bearing. It just happened to me. You're looking at a $400 fix.

Mar 22, 2009 | 1994 Honda Civic Del Sol

1 Answer

Eagle Talon 95 ESi manual 5 speed whining noise related to clutch


who ever told you its the throw out bearing was wright. its an enclosed bearing so it does not run in any oil. if it only makes noise when it cold or sets for a while its common and dose not warrent taking it to a shop. all there going to tell you is you need a new clutch$$$$witch you do not need.

Jan 19, 2009 | 1995 Eagle Talon

1 Answer

2003 toyota mr2 spyder 5 speed transmission grinding noise


Here is what is going on. When you push in the clutch pedal you remove the connection between the engine and the transmission. At this time all the parts in the transmission stop rotating.Since the only parts in the transmission that can rotate without moving the car are the input parts we can safely assume that the noise can only be from there.This can be a transmission input bearing. Worn Synchro mechanism (allows the transmission to shift without grinding the gears)Low fluid in the tranny. Or a bad clutch component. Top off or change the fluid. If it still makes the noise you need to take it to a tranny shop.

Nov 30, 2008 | 2002 Toyota MR2 Spyder

1 Answer

5 Speed transmision problem


Obviously kicking the clutch in disconnects the gear box from the engine so it sounds like you have a bad idler bearing in the gear box.

Either way its going to need the gear box stripped out and rebuilt I would guess. More than 150K miles on it I assume.

Jul 31, 2008 | 1995 Eagle Talon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...