Question about Cars & Trucks

1 Answer

I have noticed that my passenger side headlight cluster has become discoloured on the inside (it looks foggy). Is there any way I can fix this apart fr buying a new cluster?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Cars & Trucks Master
  • 373 Answers

If it is due to water on the inside, remove the bulb. Then tape a hose over a hair dryer and blow hot air into the bulb hole until the water disappears. Reinstall bulb.

Posted on Apr 08, 2015

  • Sean Toon
    Sean Toon Apr 08, 2015

    How can I tell if it's because of water? Has only happened recently (peugeot 207 06 plate)



2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: My passenger side mirror is loose. It wiggles

Hi there :)

Mine is doing the same thing. It is difficult to take apart, but a bit of glue is all it really needs. Check this link I found on

Holler :)

Posted on Dec 22, 2010

Testimonial: "Thanks!!!"

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Dashboard & Highbeams Don't Work


Nov 03, 2012 | Chevrolet Blazer Cars & Trucks

2 Answers

2006 ford five hundred shortage in passenger headlight

check for a loose connection on the back of the bulb, wire in the connector for the bulb or a bad ground connection/ wire
all you can do with a visual inspection

Apr 24, 2017 | 2005 Ford Five Hundred

1 Answer

Passenger side headlight has blown 3 new bulbs, should i replace the fuse? or Check the connectors?

Check the connector contacts for a short circuit, with a tester. Make sure that you are replacing the proper type of bulb. Inspect the lens for fogginess. It might seem odd, but overfilling the coolant water, will spill out of the top of the bottle as spray and vapor. This liquid somehow finds its way unto the passenger side bulb connector, and into the lens, causing temporary fogginess and possibly a short in the connector. It happened to me.

Aug 08, 2011 | 2002 Honda Accord

1 Answer

I need to know which fuse number for lights

Turn Signal (Right) white/tan (F), white/yellow (R) + TIPM, green 16 pin plug, pin 3; green 26 pin plug, pin 4
The TIPM (Totally Integrated Power Module) is in the engine compartment, on the passenger side fender.

Headlight white/brown -1.2K ohms [2009 = same] headlight switch or instrument cluster, gray 26 pin plug, pin 3
AutoLights same as headlight
Reverse Light white/lt. green + [2009 = same] passenger kick, harness to rear
Left Front Door Trigger purple - [2009 = VIOLET] driver kick or instrument cluster, white plug, pin 3
Right Front Door Trigger purple/white - [2009 = VIOLET/white] pass kick or instrument cluster, white plg, pin 16

Jun 25, 2011 | 2009 Dodge Challenger

1 Answer

One of my headlight is foggy and dirty on the inside is there a way to take the headlights out and clean them?

Nope...they are a sealed beam type and if it is foggy or has dew in it the seal is bad. You could remove the headlight assembly and wash it out but you will have it happen again.

Aug 07, 2010 | 1998 Saturn SC

3 Answers

I cannot find the headlite relay any idea where it is. thanks bill

Usually built in to the head light switch or could be located on or under the kick panel by your feet....

Feb 14, 2010 | 1987 Chevrolet Camaro

3 Answers

1999 taurus has foggy headlights.

Most Auto Stores sell a headlight solution that cleans the fogginess of your headlight. Assuming your headlight looks dirty and cloudy as would a pool, a simple solution is to pick up the cleaner at any auto place. That is a lot cheaper than buying a new headlight.

Jan 31, 2010 | 1999 Ford Taurus

1 Answer

How to remove headlight lens on a 1999 ford taurus. They have become foggy and I heard some where you can clean the inside.

The lens isn`t removable, you can buy a kit from the auto parts store to polish them from the outside without even taking them off, works very well.Good luck

Oct 30, 2009 | 1999 Ford Taurus

3 Answers

Adjusting headlights on 2003 honda accord

Further to Emmisionwiz's answer that worked for me - the holes are in the black plastic covering the radiator support, to each side more or less in line with the headlights. They are marked with an "A" and rotation directions for UP and DOWN. The Phillips screwdriver goes into the hole about 45 degrees from vertical and engages the adjusting rack, where the teeth of the Phillips screwdriver are the pinion. If you shine a flashlight down the hole you can see the rack teeth and all becomes clear. But you will need a long Phillips screwdriver and a little bit of luck.

In the owner's manual it says the lights are adjusted correctly at the dealership and if they need adjustment because of a trailer then take the car to a Honda certified mechanic.

I have a 2004 Accord also and the method is the same for that one too.

Aug 17, 2008 | 2003 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides