Question about 1998 Ford Expedition

3 Answers

Oil is in the resovior now it link out of the resovior

Posted by on


3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 454 Answers

Totally agree with previous answers. blown head gasket. Do not drive truck. Need engine overall however if engine block is cracked you need a new engine. Time to get rid of it and part it out. Sorry for the bad news.

Posted on Apr 08, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 284 Answers

Blown headgasket is the best answer. your going to need to replace the engine with a another or have your head gaskets replaced. both can be expensive.

Posted on Apr 08, 2015

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 25 Answers

If I'm understanding you correctly, you're saying there is oil in your reservoir? Could be the head gasket starting to go bad. If you're saying it's leaking out of the reservoir, then you have a crack somewhere in the reservoir or the rubber line that connects to it.

Posted on Apr 08, 2015

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Engine runs, oil dip stick shows thin yellow liquid, can't fill water resovior What is wrong

Perhaps nothing. If the engine runs perfectly, and the oil dipstick is on the full mark, perhaps you have clean "yellow colored" oil in there. Have a mechanic smell the oil and see if it is oil.
Clean oil can be a light yellow color.
Water reservoir is a whole other system.

Oct 17, 2017 | Cars & Trucks

1 Answer

I have a Renegade 850w amp and it's overheating. I got the renegade subs to go with it. Just having problems figuring out why it's overheating. Can anyone help?

Here are a list of items to check : WATER PUMP, THERMOSTAT,
BELTS, CONDITION OF COOLANT, CONDITION OFCOOLING FAN AND ITS RELAY, Have cooling system pressure checked for leaks and possible head gasket damage. If you find oil in the coolant resovior tell tale sign that head gasket is defective. Keep me posted

May 09, 2014 | Cars & Trucks

1 Answer

Master cylindar resovior removal

There may or may not be a bolt or screw at the bottom middle of the reservoir, otherwise, clamp the master cylinder in a vise and gently but firmly pry the reservoir off.

Jul 26, 2012 | 1996 Chrysler Town & Country

2 Answers

Power steering resovior for a pontiac g6 2005

there is no resovior.. had the same problem trying to find it.. The power steering runs off an electric motor

Jan 01, 2011 | 2005 Pontiac G6

1 Answer

My 98 pontiac firebird suddenly starting knocking.

Sounds like a bad head gasket. Look for milky oil in the coolant resovior.

Apr 05, 2010 | 1999 Pontiac Firebird

1 Answer

Steps on bleeding a clutch slave cylinder for a 1985 chevy Suburban

1.) fill resovior 2.) remove bolts connecting the slave cylinder to the bell housing, and remove slave cylinder (leave the line connected if possible)- if not remove line and then reconnect once slave is removed from bell housing. 3.) open bleeder valve on slave, if fluid starts to run out then let it run for 8 to 10 min (all the while keeping an eye on the resovior fluid level, making sure it stays relitivly full.) 4.) close bleeder valve. 5.) top off resovior. 6.) hold slave cylinder in hand, in some way that you can actuate the plunger rod, open the bleeder valve and depress the rod untill it stops, while holding pressure on rod close the bleeder valve. 7.) release the plunger rod. 8.) repeat steps 6. & 7. untill fluid running out of bleeder valve is a steady streem with no air bubbles. (check resovior appr. every 2nd time to ensure it dose not go dry. 9.)re-install slave cylinder and resovoir cap.

Oct 14, 2009 | 1985 Chevrolet Suburban

1 Answer

Brake pedal travels to floor with little ressistence.

Check your brake pads and your fluid level in your master cylinder. If both of these are fine it might be that the rubber seals in the booster are nearly stuffed and need replaceing there should be four small seals and if they are leaking you will eventually loose braking capacity all together so please be careful. These seals are easy to change as the only thing holding the master cylinder rod in is a c pin. You will need to remove the resovior from the car and the rod is in the roundish cylinder under the resovior. C pin is on the firewall (closest to the driver) side

Jul 26, 2008 | Pontiac Montana Cars & Trucks

Not finding what you are looking for?
1998 Ford Expedition Logo

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides