Question about 2006 Pontiac G6

2 Answers

Where is the coolant drain plug - 2006 Pontiac G6

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 1,140 Answers

The location of the coolant drain plug is not easy to get to. Follow the hose on the bottom of the coolant reservoir, down to the tee fitting. Disconnect the lower radiator hose here to drain out the radiator. Lower the hose after disconnecting it. Then all the coolant will drain out of the radiator. This is much easier than trying to drain the coolant at the coolant drain plug.

Posted on May 18, 2015

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 110 Answers

On the bottom of the radiator. There will be a little plastic valve that looks like a butterfly. Spin this to loosen it, and it will let coolant flow out.

Posted on Apr 08, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to flush coolant on 2004 grand prix


  • Move your badass w-body (a.k.a. Pontiac Grand Prix) to a level area and set the parking brake. Pop the hood and touch the radiator. If it's warm let it cool before you continue.
  • Twist the radiator cap one full turn (Remember to be careful because even when radiators are cool they can still erupt coolant)
  • Place any type of container (bucket [but has to be able to hold 2 gallons]) underneath the radiator and blow the drain plug. (The drain plug on your Grand Prix is on the driver's side bottom of the radiator facing the engine.)
  • Loosen the drain plug and let the old coolant to drain completely. (You may need a wrench to loosen the drain plug)
  • Dispose the old coolant in a sealable container (The coolant is very toxic to people and pets, so you gotta be careful)
  • Shut the radiator drain plug and fill the radiator with water.
  • Run car for a little bit and repeat the process again. (Let car cool, and drain water)
  • Close the drain plug and fill the radiator with fresh coolant until it's about an inch from overflowing. (DO NOT USE ORANGE DEX COOLANT IT IS HARMFUL FOR YOUR HEADGAKETS) You will need 3 gallons of coolant (SE, GT, GT1, GT2, GTP, GTP Comp G.) and 4 for the GXP model. Be sure to check the drain plug for any leakage.
  • Start your car and turn the heating system to high. Allow the car to keep running until the cooling fan turns on twice. After that happens, switch off the engine and check the coolant level. If it went down, add more coolant. If not, put the radiator cap back on and close the hood.

Feb 20, 2014 | Cars & Trucks

1 Answer

A diagram of the flushing of a radiator and block of a chevrolet blazer LS 2000


Theres no such thing as a diagram, here are the draining instructions, hope this helps...
  • 1-Place a large drain pan beneath the radiator drain plug. The drain plug is located on the passenger side at the very bottom of the radiator on the engine side.

  • 2-Make sure the engine is cool. Open the hood of the truck and remove the radiator cap.
  • 3-Loosen the drain plug. On the 2000 Blazer, the drain plug is a wing-nut type of plug. Twist it with your fingers until the coolant begins to drain.

  • *To flush the block, once you have drained the radiator, run the engine for a bit untill the temp gauge goes up to normal, then the coolant will have been evacuated from the block. DO NOT leave the engine on, once it reaches normal temp, (this will happen quick) turn off right away, otherwise you'll be forking out a few hundred $$$ to fix the worped heads.
    4-Tighten the drain plug with your fingers once the coolant has drained fully from the radiator. Remove the drain pan and dispose of the used coolant properly.
    Some service stations will take and recycle your used coolant.
    Hope this helps...



  • Read more: How to Drain a Radiator From a 2000 Chevy Blazer ' eHow.com http://www.ehow.com/how_6357264_drain-radiator-2000-chevy-blazer.html#ixzz1VS4RBufX

    Aug 19, 2011 | 2000 Chevrolet Blazer

    2 Answers

    Where is the engine drain plug?


    It is always on the lower side of the oil pan on the "bulge".

    Aug 17, 2011 | 2004 Honda Accord

    2 Answers

    How to drain radiator


    hello. on the drivers side of radiator is a drain. here is a picture and the instructions for draining the coolant out.



  • Install a tube on the radiator drain. Place the end of the tube in the drain pan.
  • After the engine cools down, remove the radiator cap.
  • Completely open the radiator drain ****.
  • Allow the coolant to drain from the system until the flow stops.
  • Place a drain pan under the block drain hole plug.
  • Remove the drain hole plug from the engine block.
  • Allow the coolant to drain from the block until the flow stops. There may be more drainage from the radiator at this time.
  • Install the block drain hole plug.
  • Close the radiator drain ****.


  • 1ab38d9.gif

    Jul 04, 2010 | 1997 GMC Suburban

    3 Answers

    Where is the drain plug for the radiator


    Should be a drain **** at the bottom of the radiator that unscrews out. It looks like a wing nut has been welded to a bolt on the end of it. Another way to do this is just pull off the bottom hose.

    Mar 31, 2010 | 2001 Jeep Cherokee

    2 Answers

    Drain cooling system


    Make sure the engine is cold before you drain the cooling system. First remove the radiator cap. Under the hood on the bottom of the radiator you will find a drain plug. You turn it counter clockwise and drain the coolant into a container. After it has been drained add new coolant using the half and half (half coolant half clean water.) After having added the coolant. Be sure to add the kind of coolant that ,("goes with any color".) Replace the radiator cap.Run the engine to operating temerature then be sure to bleed the cooling system. They have a bleed screw near the thermostat housing . (That's where the hose from the radiator connects to.) Make sure all the air comes out from the bleed valve screw until coolant starts coming out. Tighten the screw and let the engine get cool again. check that there is coolant in the container where it says coolant only near the radiator.

    Nov 27, 2009 | 1998 Ford Windstar

    3 Answers

    Where is the engine coolant drain bolt on a 2003 2azfe camry? i found the radiator drain but can't find the engine drain plug-a photo would be great


    The textbook method is to remove the drain plug on the bottom of the radiator.

    Most drain plug is make of inexpensive nylon/plastic and it may fall apart while you turn it.

    The professional method is to loosen the lower radiator clamp and drop to lower radiator hose.

    Drain the coolant onto a large drain pan and recycle the coolant

    ===

    I just did a FREE write up on air purge from coolant system and how to detect initial state of blown head gasket at the Fixya tip selection.

    Click HERE

    or follow link below.

    http://www.fixya.com/cars/r3582329-how_to_inspectdiagnose_and_repair_minor_

    Nov 17, 2009 | 2003 Toyota Camry

    2 Answers

    How do you drain the radiator and the coolant tank and add new coolant?


    The textbook method is to remove the drain plug on the bottom of the radiator.

    Most drain plug ismake of inexpensive nylon/plastic and it may fall apart while you turn it.

    The professional method is to loosen the lower radiator clamp and drop to lower radiator hose.

    Drain the coolant onto a large drain pan and recycle the coolant

    ===

    I just did a FREE write up on air purge from coolant system and how todetect initial state of blown head gasket at the Fixya tip selection.

    Click HERE

    or follow link below.

    http://www.fixya.com/cars/r3582329-how_to_inspectdiagnose_and_repair_minor_

    Nov 15, 2009 | 2002 Saturn L-Series

    2 Answers

    How do I flush the coolant on the 2002 tundra V6?


    PROCEDURE TO FLUSH
    • Park the Toyota Tundra on a level surface and set the parking brake. Then, with the engine off, touch the radiator to gauge its temperature. If the radiator is still warm, allow it to cool off before you start next step.
    • Twist the radiator cap one full turn, pause for a few seconds and then fully remove the cap. You want to pause to relieve any internal pressure inside the radiator. Opening a pressurized or hot radiator can cause it to spew hot coolant and burn anyone it comes into contact with.
    • Position a bucket or tray with a two-gallon capacity underneath the radiator, below the drain plug. To access the drain plug, you may have to remove the plastic engine undercover, which should be on the driver's side of the Toyota Tundra's radiator. Use a socket wrench to open the plug.
    • Open the drain plug and allow the existing coolant to drain completely into the bucket. Once complete, pour the old coolant into a sealable container for proper disposal.
    • Put the drain bucket back under the radiator and close the drain plug. Then, fill the radiator with distilled water. Next, open the drain plug to let the water flow into the bucket. Replicate this procedure until the water runs debris free out the radiator.
    • Replace the radiator drain plug and pour fresh coolant into the radiator until it's within an inch of overflowing. With the Toyota Tundra, you need to use the same coolant that came with the truck. Most likely, it is Toyota Long Life red coolant, but consult the owner's manual to be sure.
    • Start the engine of the Tundra and turn the heating fan to high. Allow it to run until the cooling fan turns on two separate times.
    • Switch the Toyato Tundra off and check the coolant level. If it is lower than before, add more coolant. If not, put the radiator cap back on and close the hood.
    1. TIPS
    • You will need 2 gallons of coolant for the four-valve Toyota Tundra and 3 gallons of coolant for the six-valve model.
    • Using tap water from a hose is an alternative to flushing with distilled water, but tap water can leave sediments behind that can damage your coolant system
    WARNING
    • Because coolant is extremely toxic to people and pets, it's imperative that you dispose of the old coolant properly.

    Nov 14, 2009 | 2002 Toyota Tundra

    3 Answers

    Cannot find coolant drain plug


    It is located at bottom of radiator, you will need 1/2 inch square drive or a 3/16 inch hex drive to open drain valve. Usually on pass. side at bottom end of radiator.

    Jul 15, 2009 | 1999 Oldsmobile Cutlass

    Not finding what you are looking for?
    2006 Pontiac G6 Logo

    237 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Pontiac Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you a Pontiac Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...